BUNDLE
Softpack Battery 6S 21.6V-22.2V 15Ah BMS 20A 6x3 XLR-3
€255.00*
Prod. no.:
110522
ENERpower soft-pack battery 21.6V-22.2V in format 6S3P | Capacity 15Ah | for DIY | with Samsung SDI INR21700-50E
Important General Information
The 6S batteries (21.6V - 22.2V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is done with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.
The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Suitable for Devices with up to 430 Watt consumption..
Highlights
High-quality production - Made in Germany
Production Just-In-Time
20A BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: Samsung SDI INR21700-50E
Voltage (nominal): 21.6V-22.2V
Capacity: 15Ah
Power: approx. 330 Wh
Configuration: 6S3P
Construction: 6 x 3
Internal resistance: < 90 mOhm
Charging voltage: 25.2V
End-o-fdischarge voltage: 18V
Continuous discharge current: 20A = 430 watts
Weight: Approx. 1.55 kg.
Dimensions
Length: 140 mm Length
Width: 70-85mm (side with BMS)
Height: 72 mm
Variants from €249.00*
BUNDLE
Softpack Battery 6S 21.6V-22.2V 20Ah BMS 20A 6x4 XLR-3
€299.00*
Prod. no.:
110511
ENERpower soft-pack battery 21.6V-22.2V in format 6S4P | Capacity 20Ah | for DIY | with Samsung SDI INR21700-50E
Important General Information
The 6S batteries (21.6V - 22.2V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is done with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.
The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Suitable for Devices with up to 430 Watt consumption..
Highlights
High-quality production - Made in Germany
Production Just-In-Time
20A BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: Samsung SDI INR21700-50E
Voltage (nominal): 21.6V-22.2V
Capacity: 20Ah
Power: approx. 440 Wh
Configuration: 6S4P
Construction: 6 x 4
Internal resistance: < 90 mOhm
Charging voltage: 25.2V
End-o-fdischarge voltage: 18V
Continuous discharge current: 20A = 430 watts
Weight: Approx. 1.85 kg.
Dimensions
Length: 140 mm Length
Width: 92-105mm (side with BMS)
Height: 72 mm
BUNDLE
Softpack Battery 6S 21.6V-22.2V 25Ah BMS 20A 10x3 XLR-3
€340.00*
Prod. no.:
10803
ENERpower soft-pack battery 21.6V-22.2V in format 6S5P | Capacity 25Ah | for DIY | with Samsung SDI INR21700-50E
Important General Information
The 6S batteries (21.6V - 22.2V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is done with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.
The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Suitable for Devices with up to 430 Watt consumption..
Highlights
High-quality production - Made in Germany
Production Just-In-Time
20A BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: Samsung SDI INR21700-50E
Voltage (nominal): 21.6V-22.2V
Capacity: 25Ah
Power: approx. 550 Wh
Configuration: 6S5P
Construction: 10 x 3
Internal resistance: < 90 mOhm
Charging voltage: 25.2V
End-o-fdischarge voltage: 18V
Continuous discharge current: 20A = 430 watts
Weight: Approx. 2.35 kg.
Dimensions
Length: 230 mm Length
Width: 72-85 mm (side with BMS)
Height: 72 mm