- Electromobility
- Power Supplier
- Energy Storage
- PV technology
- Chargers
- Rechargeable Batteries
-
Battery Packs & Parts
-
Li-Ion Battery Packs
- Batteries 1S (3.6V-3.7V)
- Batteries 2S (7.2V-7.4V)
- 3S Batteries (10.8V-11.1V)
- Batteries 4S (14.4V-14.8V)
- Li-Ion Battery 5S (18V - 18.5V)
- Li-Ion Akkus 6S (21,6V-22,2V)
- Batteries for electrical devices
- eBoat Batteries
- Industry
- Ni-Mh Batteries
- starter battery 12V LiFePo4
- LiFePO4 Battery Packs
- Li-ion Batteries for LED-Flashlights
- LiFePo4 Battery Packs
- Battery Pack Accessories
- DIY Batteries (no BMS)
-
Li-Ion Battery Packs
- LED Flashlights / Batteries
- Leftovers / End Of Life
Filter
–
BUNDLE
Enerpower LiFePO4 12V motorcycle battery starter battery 2.4Ah (30Wh)
From
€49.30*
Prod. no.:
11381
Enerpower LiFePO4 12V motorcycle battery starter battery 2.4Ah (30Wh) - replaces lead-acid 12V, lead-gel batteries 12V
Important General Information
With a cold start current (CCA) of 150A, this battery (starter battery) has a faster starting ability with about 70% less weight compared to lead-acid batteries. LiFePo4 batteries have a very low self-discharge, i.e. the battery can remain connected to the motor, moped etc. for several months without being discharged (deep discharge) Unlike lead-acid batteries, which lose capacity over time and possibly sulphate, lithium-ion batteries do not lose capacity over their entire service life. The service life is about 2000 charging and discharging cycles. This battery is very easy to install because it has similar dimensions to the lead battery. We will send you 4 foam spacers to achieve optimal attachment. LiFePO4 batteries can be charged very quickly because their nominal capacity is lower (the battery cannot be completely discharged as with lead batteries) and their internal resistance is lower. LiFePo4 rechargeable batteries (batteries) are maintenance-free and cannot leak. As a result, they can be mounted in any position.
Highlights
High-quality manufacturing – partial production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
2.4Ah at LiFePo4 corresponding approximately 4Ah-5Ah by lead-gel batteries
directly from the manufacturer
Rechargeable – after 1800 complete charging cycles still maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data
Voltage (nominal): 12.8V (12V)
Capacity: 2.4Ah
Power: approx. 30 Wh
Maximum charging current: 2.4A (1C)
Charge Voltage: 14.4V-14.6V
End-of-discharge voltage: 10V
Continuous discharge current: < 40A
Weight: About 450 grams
Dimensions (W x L x H): 113 x 69 x 85 mm
BUNDLE
Enerpower LiFePO4 12V motorcycle battery starter battery 4Ah (50Wh)
From
€61.20*
Prod. no.:
11383
Enerpower LiFePO4 12V motorcycle battery starter battery 4Ah (50Wh) - replaces lead-acid 12V, lead-gel batteries 12V
Important General Information
With a cold start current (CCA) of 250A, this battery (starter battery) has a faster starting ability with about 70% less weight compared to lead-acid batteries. LiFePo4 batteries have a very low self-discharge, i.e. the battery can remain connected to the motor, moped etc. for several months without being discharged (deep discharge) Unlike lead-acid batteries, which lose capacity over time and possibly sulphate, lithium-ion batteries do not lose capacity over their entire service life. The service life is about 2000 charging and discharging cycles. This battery is very easy to install because it has similar dimensions to the lead battery. We will send you 4 foam spacers to achieve optimal attachment. LiFePO4 batteries can be charged very quickly because their nominal capacity is lower (the battery cannot be completely discharged as with lead batteries) and their internal resistance is lower. LiFePo4 rechargeable batteries (batteries) are maintenance-free and cannot leak. As a result, they can be mounted in any position.
Highlights
High-quality manufacturing – partial production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
4Ah at LiFePo4 corresponding approximately 7Ah-8Ah by lead-gel batteries
directly from the manufacturer
Rechargeable – after 1800 complete charging cycles still maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data
Voltage (nominal): 12.8V (12V)
Capacity: 4Ah
Power: approx. 50 Wh
Maximum charging current: 4A (1C)
Charge Voltage: 14.4V-14.6V
End-of-discharge voltage: 10V
Continuous discharge current: < 60A
Weight: About 600 grams
Dimensions (W x L x H): 113 x 69 x 85 mm