ENERpower EP-MH1 Li-Ion Battery 3.6V 3200 mAh Button-Top
From
€7.36*
Prod. no.:
11361
ENERpower EP-MH1 Li-Ion Battery 3.6V 3200mAh Button-Top
General information
The battery cells offered were designed for devices that require a pronounced positive pole (nub) for use, such as flashlights, toys, measuring devices, etc. The battery cells do not have a protective circuit (PCM). Please make sure that the devices (consumers) have such protective mechanisms as drivers (flashlights) and integrated protective circuits. The battery cells are charged with Li-Ion chargers that can charge up to 4.2V.
Highlights
Original LG Chem INR18650-MH1
Button-Top
Rechargeable
Designed espcially for torchlights
Energy saving mechanism for a long life span
Preserve about 80% of its original capacity even after 300 charging cycles.
No Memory effect – charge your battery whenever you want
Environment friendly according to EU-guidelines 2002/95/EG (RoHS)
High quality battery cells with long life span and high stability
Technical Details
Min. Capacity: 3150 mAh
Typ. Capacity: 3200 mAh
Weight: approx. 50 g.
Length: ca. 72 mm +/- 0.2 mm
Diameter: 18.7 mm +/- 0.1 mm
Scope of Delivery
1 x ENERpower EP-MH1 Li-Ion Battery 3.6V 3200mAh Button-Top
ENERpower EP-Mj1 Li-Ion Battery 3.6V 3450mAh Button-Top
From
€8.67*
Prod. no.:
11360
ENERpower EP-Mj1 Li-Ion Battery 3.6V 3450mAh Button-Top
General information
The battery cells offered were designed for devices that require a pronounced positive pole (nub) for use, such as flashlights, toys, measuring devices, etc. The battery cells do not have a protective circuit (PCM). Please make sure that the devices (consumers) have such protective mechanisms as drivers (flashlights) and integrated protective circuits. The battery cells are charged with Li-Ion chargers that can charge up to 4.2V.
Highlights
Original LG Chem INR18650-MJ1
Button-Top
Rechargeable
Designed espcially for torchlights
Energy saving mechanism for a long life span
Preserve about 80% of its original capacity even after 300 charging cycles.
No Memory effect – charge your battery whenever you want
Environment friendly according to EU-guidelines 2002/95/EG (RoHS)
High quality battery cells with long life span and high stability
Technical Details
Min. Capacity: 3350 mAh
Typ. Capacity: 3450 mAh
Weight: approx. 50 g.
Length: ca. 72 mm +/- 0.2 mm
Diameter: 18.7 mm +/- 0.1 mm
Scope of Delivery
1 x ENERpower EP-Mj1 Li-Ion Battery 3.6V 3450mAh Button-Top
ENERpower VC+ Li-Ion Battery 3.6V 3450mAh MJ1
From
€13.13*
Prod. no.:
11310
Protected Li-Ion battery 3.6V Button-Top for torchlights | capacity 3450mAh | PCB 15A | battery cell LG Chem INR18650-MJ1
Highlights
Original LG Chem INR18650-MJ1
With a PCB of approx. 15A
Button-Top
Rechargeable
Designed espcially for torchlights
Energy saving mechanism for a long life span
Preserve about 80% of its original capacity even after 300 charging cycles.
IC Protection / PCB with protection against short circuits, overcharge and deep discharge up to 15A.
No Memory effect – charge your battery whenever you want
Environment friendly according to EU-guidelines 2002/95/EG (RoHS)
High quality battery cells with long life span and high stability
Technical Details
Min. Capacity: 3350 mAh
Typ. Capacity: 3450 mAh
Weight: approx. 50 g.
Length: 69.3 mm +/- 0.2 mm
Diameter: 18.7 mm +/- 0.1 mm
Scope of Delivery
1 x ENERpower VC+ 18650 battery protected Button-Top 3000 mAh (LG INR18650-HG2)
HaiLong Reention Jaffa Bike-Frame Battery case empty 14S 52V
From
€25.99*
Prod. no.:
11713
This Hailong Reention from Type Jaffa case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 70 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 14S batteries.
possible configurations: 14S1P-14S5P
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 113 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
HaiLong Reention Tyros Bike-Frame Battery case empty 14S 52V
From
€25.99*
Prod. no.:
11887
This Hailong Reention from Type Tyros case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 56 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 14S batteries.
possible configurations: 14S1P-14S4P
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 96 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
12 x Fishpaper Insultion Rings for 21700
€1.19*
Prod. no.:
11363
12 x Fishpaper Insultion Rings for 21700
15 x Fishpaper Insultion Rings for 26650
€1.19*
Prod. no.:
11364
15 x Fishpaper Insultion Rings for 26650
BUNDLE
24V LiFePo4 Enerpower Battery 8S (25.6V) 20Ah 512Wh
€265.00*
Prod. no.:
1147902
ENERpower battery LiFePO4 24V (25.6V) for the operation of 24V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 8S (25.6V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with 2 different BMS's:1. Up to 15A continuous load - for devices with a consumption of up to 370 watts2. Up to 30A continuous load - for devices with a consumption of up to 740 wattsThe protection against overcharging (29.4V) and against deep discharge (16V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 24V (25.6V)
Capacity: 20Ah
Configuration: 8S5P
Energy: about 512Wh
Maximum charging current: 5A
Internal resistance: < 70mOhm
Charging voltage: 29.2V
End-of-discharge voltage: 16V
Weight: approx. 3.6 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 225 x 130 x 70 mm
BUNDLE
24V LiFePo4 Enerpower Battery 8S (25.6V) 20Ah 512Wh
€225.00*
Prod. no.:
1152004
ENERpower battery LiFePO4 24V (25.6V) for the operation of 24V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 8S (25.6V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with 2 different BMS's:1. Up to 15A continuous load - for devices with a consumption of up to 370 watts2. Up to 30A continuous load - for devices with a consumption of up to 740 wattsThe protection against overcharging (29.4V) and against deep discharge (16V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 24V (25.6V)
Capacity: 16Ah
Configuration: 8S4P
Energy: about 410Wh
Maximum charging current: 5A
Internal resistance: < 70mOhm
Charging voltage: 29.2V
End-of-discharge voltage: 16V
Weight: approx. 3 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 225 x 110 x 74 mm
BUNDLE
24V LiFePo4 Enerpower Battery 8S (25.6V) 28Ah 717Wh
€385.00*
Prod. no.:
1148205
ENERpower battery LiFePO4 24V (25.6V) for the operation of 24V devices, motors, wheel chairs etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 8S (25.6V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with 2 different BMS's:1. Up to 15A continuous load - for devices with a consumption of up to 370 watts2. Up to 30A continuous load - for devices with a consumption of up to 740 wattsThe protection against overcharging (29.4V) and against deep discharge (16V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 24V (25.6V)
Capacity: 28Ah
Configuration: 8S7P
Energy: about 717Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 29.2V
End-of-discharge voltage: 16V
Weight: approx. 5.2 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 225 x 200 x 70 mm
Variants from €365.00*
32700 Battery Spacer holder for 2 batteries size 32700
From
€0.16*
Prod. no.:
3260002
Plastic spacer/holder for 2 battery cells with 32 mm diameters such as 32700 etc.
In each cell mount, there is room for 2 cells (you need at least 2 of them).
The spacers can be connected to each other
Scope of Delivery
1 x cell holder with room for 2 battery cells 32 mm diameters like 32700
32700 Battery Spacer holder for 3 batteries size 32700
From
€0.18*
Prod. no.:
327003
Plastic spacer/holder for 3 battery cells with 32 mm diameters such as 32700 etc.
In each cell mount, there is room for 3 cells (you need at least 2 of them).
The spacers can be connected to each other
Scope of Delivery
1 x cell holder with room for 3 battery cells 32 mm diameters like 32700
BUNDLE
36V LiFePo4 Enerpower Battery 12S (36V) 16Ah 610Wh
€315.00*
Prod. no.:
11521
ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 36V (12S)
Capacity: 16Ah
Configuration: 12S4P
Energy: about 610Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 43.2V
End-of-discharge voltage: 24V
Weight: approx. 4 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 330 x 120 x 70 mm
BUNDLE
36V LiFePo4 Enerpower Battery 12S (36V) 20Ah 720Wh
€325.00*
Prod. no.:
1148502
ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 36V (12S)
Capacity: 20Ah
Configuration: 12S5P
Energy: about 720Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 43.2V
End-of-discharge voltage: 24V
Weight: approx. 5.4 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 330 x 160 x 70 mm