ENERpower battery LiFePO4 48V (15S) for the operation of 48V devices, motors etc. Important general informationWe assemble this series of LiFePo4 batteries in the 15S (48V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 30A - for devices with a consumption of up to 1440 wattsThe protection against overcharging (55V) and against deep discharge (30V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights High-quality production in Germany BMS with an integrated passive balancer BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of original capacity after 1800 full charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95/EG (RoHS) Technical specifications  Voltage (nominal): 48V (15S) Capacity: 20Ah Configuration: 15S5P Energy: about 960Wh Discharge Current: 30A Maximum charging current: 8A Internal resistance: < 70mOhm Charging voltage: 54V End-of-discharge voltage: 30V Weight: approx. 6 kg. Charging: XLR-3 Discharge: XT-90 Dimensions: ca. 420 x 130 x 70 mm

Important general informationThis 48V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13S) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge)  in this Case. The back light is operated via its own On/Off button. Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR18650-35E    Voltage (nominal): 48V (13S)    Capacity: 13.80Ah    Configuration: 13S4P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Fuse: 30A    Weight: approx.3.35 kg.    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 13.80Ah with INR18650-35E1 x luggage rack FME0006

Important general informationThis 48V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge)  in this Case. Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Samsung SDI INR18650-35E Li-Ion cells -> up to 8A continuous load per parallel connection    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR18650-35E    Voltage (nominal): 48V (46.8V - 48.1V)    Capacity: 13.8Ah    Configuration: 13S4P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Fuse: 30A    Weight: approx.2.85 kg.    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 13.8Ah with INR18650-35E1 x luggage rack FME0006

ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Round Plug DCunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 48V    Capacity: 15Ah    Energy: 720Wh    Configuration: 13S3P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: DC    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy  960Wh | Capacity  20 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-50E.Important general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR21700-50E    Voltage (nominal): 48V    Capacity: 16Ah - 20Ah    Energy: 770Wh - 960Wh    Configuration: 13S4P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.4.30 kg (without bracket)    Charging: 3-Pins IP67 Zenit    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 122 mm

ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 12.8Ah (615WH) with INR18650-MH1 For motors up to 950 Watt Important General Information This 48V battery in the Hailong Pro case, that we manufacture, can be mounted on the bike’s frame, or on the rear carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accommodate up to 52 battery cells of type 18650. With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950W working in 48V systems. The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings. Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Samsung SDI INR18650-35E Li-Ion cells–>up to 8A continuous load per parallel circuit directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical Data Li-ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 48V Capacity: 12.80Ah Energy: 615Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30A fuse with XT90 power connector Scope of Delivery 1 x battery Hailong PRO 48V 12.8Ah 1 x holder with discharge cable Rubber plates 2 x keys

ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 13.8Ah (660WH) with Samsung SDI INR18650-35E For motors up to 950 Watt Important General Information This 48V battery in the Hailong Pro case, that we manufacture, can be mounted on the bike’s frame, or on the rear carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accommodate up to 52 battery cells of type 18650. With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950W working in 48V systems. The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings. Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Samsung SDI INR18650-35E Li-Ion cells–>up to 8A continuous load per parallel circuit directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Technical Data Li-ion Cell: Samsung SDI INR18650-35E Voltage (nominal): 48V Capacity: 13.80Ah Energy: 660Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30A fuse with XT90 power connector Scope of Delivery 1 x battery Hailong PRO 48V 13.8Ah 1 x holder with XT90 discharge cable Rubber plates 2 x keys Optional (surcharge): 1 x battery charger 2A or 3A or 5A

ENERpower Softpack battery 48V in format 13S2P | 480 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | with LG Chem INR21700 50M. Important General Information The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc. In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc. The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 48V motors 250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG Chem INR21700-50M Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 10Ah Power: approx. 480 Wh Configuration: 13S2P (set up: 13×2) Internal resistance: < 75 mOhm Charge voltage: 54.6V End-of-discharge voltage: 39V Continuous discharge Current: 20A = 950 watts 5 seconds discharge current: 30A = 1440 watts Weight: 2.15 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 305 mm Width: 46 mm – 56 mm Height: 74 mm

ENERpower softpack battery 48V (set-up 13S4P) 12.8Ah for eBikes, with MH1 battery cells from LG Chem in Enerpower Frame  bag Important General Information This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure. This battery is also suitable for engines with up to 950 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg. Compatible with engines 250 watts / 500 watts / 750 watts / 950 watts Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with integrated passive balancer (4.1V pro rechargeable cell) BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 48V (46.8V 48.1V) Capacity: 12.8 Ah Power: About 615Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charge Voltage: 54.6V Maximum Charging current: 5A End-of-Discharge Voltage: 39V Continuous Discharge Current: 20A = 950 watts 10 seconds 30A: approx. 1440 watts Weight: Approx. 2.85 kg. (Battery only) Enerpower Bike-Frame Bag Waterproof With 6 x Velcro-fastener can be attached to any part of the bike-frame Suitable as frame bag for batteries up to 5 kg.

ENERpower softpack battery 48V (set-up 13S3P) 15Ah for eBikes, with M50 battery cells from LG Chem (21700) in or without carry bag Important General Information This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure. This battery is also suitable for engines with up to 950 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg. Compatible with engines 250 watts / 500 watts / 750 watts / 950 watts Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with integrated passive balancer (4.1V pro rechargeable cell) BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: Samsung SDI INR21700-50E Voltage (nominal): 48V (46.8V 48.1V) Capacity: 15 Ah Power: About 720Wh Configuration: 13S3P Internal resistance: < 75 mOhm Charge Voltage: 54.6V Maximum Charging current: 5A End-of-Discharge Voltage: 39V Continuous Discharge Current: 20A = 950 watts 10 seconds 30A: approx. 1440 watts Weight: Approx. 3 kg. (Battery only) Dimensions: 305 x 75 x 74 mm Roswheel Attack Bike-Frame Bag Waterproof With 6 x Velcro-fastener can be attached to any part of the bike-frame Suitable as frame bag for batteries up to 5 kg.

ENERpower Softpack battery 48V in format 13S4P | 960 Wh | capacity 20 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E Important General Information The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc. In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc. The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 48V motors 250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: Samsung SDI INR21700-50E Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 20 Ah Power: approx. 960 Wh Configuration: 13S4P (set up: 13×4) Internal resistance: < 75 mOhm Charge voltage: 54.6V End-of-discharge voltage: 39V Continuous discharge Current: 20A = 950 watts 5 seconds discharge current: 30A = 1440 watts Weight: 3 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole Dimensions Length: ca. 305 mm Width: ca. 92 mm – 102 mm Height: ca. 75 mm

ENERpower Softpack battery 48V in format 13S5P | 1200 Wh | capacity 25 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E / INR21700-M50LT Important General Information The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc. In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc. The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 48V motors 250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: Samsung SDI INR21700-50E / INR21700-M50LT Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 25 Ah Power: approx. 1200 Wh Configuration: 13S5P (set up: 10×6) Internal resistance: < 75 mOhm Charge voltage: 54.6V End-of-discharge voltage: 39V Continuous discharge Current: 30A = 1440 watts 5 seconds discharge current: 40A = 1920 watts Weight: 4.65 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 300 mm Width: 110 mm – 125 mm Height: 72 mm

ENERpower Softpack battery 48V in format 13S6P | 1440 Wh | capacity 30 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E / LG INR21700-M50T Important General Information The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc. In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc. The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 48V motors 250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG INR21700-M50T / INR21700-50E Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 30 Ah Power: approx. 1440 Wh Configuration: 13S6P (set up: 13×6) Internal resistance: < 75 mOhm Charge voltage: 54.6V End-of-discharge voltage: 39V Continuous discharge Current: 30A = 1440 watts 5 seconds discharge current: 40A = 1920 watts Weight: 6.65 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 286 mm Width: 132 mm – 145 mm Height: 72 mm