e-Bike final background
Electromobility
Energy caes web vertical
Energy Storage
solar final background
PV Technology
hcfgc
Battery Packs
new banner battery pack
Chargers & Parts
product Bundles3
Shop now
Tip
BUNDLE
720Wh Motor Kit 36V 250W + Battery 36V Hailong Jericho 20Ah
Prod. no.: 11122
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Jericho 36V 20Ah You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs. General Information This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display + Charger You can choose a suitable display and charger from our bundle offers Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Jericho Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700 M50T Voltage (nominal): 36V (37V) Capacity: 20Ah Energy: approx. 720Wh Configuration: 10S4P Internal resistance: < 75 mOhm Charging voltage: 42V End-of-discharge voltage: 30V Maximal charging: 5A Continuous discharge current: 20A = 720 Watt 10 Min. discharge current: 25A = 900 Watt 5 Sec. discharge current: 35A = 1260 Watt Constant load per cell: approx. 3.7A or 7A in peak load. Weight: approx. 3.25 Kg                                          

€725.00*
Tip
BUNDLE
900Wh Motor Kit 36V 250W TSDZ2B + Battery 36V Hailong Megiddo 25Ah
Prod. no.: 112251
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Megiddo 36V 25Ah You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs. General Information This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2B has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display + Charger You can choose a suitable display and charger from our bundle offers Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Megiddo Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700 M50T Voltage (nominal): 36V (37V) Capacity: 25Ah Energy: approx. 900Wh Configuration: 10S5P Internal resistance: < 75 mOhm Charging voltage: 42V End-of-discharge voltage: 30V Maximal charging: 5A Continuous discharge current: 20A = 720 Watt 10 Min. discharge current: 25A = 900 Watt 5 Sec. discharge current: 35A = 1260 Watt Constant load per cell: approx. 3.7A or 7A in peak load. Weight: approx. 4 Kg                                          

Variants from €745.00*
€760.00*
Tip
BUNDLE
Coaster Break Motor Kit 250W + Battery 36V Gath for Rack with Back Light
Prod. no.: 11235
Modify your own Kit Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 36V + Battery ENERpower Gath for the rack in 2 sizes (17.10Ah and 20.30Ah) Charger and Display you can choose out from the List of available products General Information This kit includes a Tongsheng TSDZ2 36V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Gath in 36V, Display and a charger. Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine has a back pedal function, so-called Coaster breakThe kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2 Motor type: mid-motor with Coaster Break Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. 42T Display Type: VLCD5, or XH-18 Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Powered by Samsung SDI Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details General Information Manufacturer: ENERpower (Germany) Type: Gath Rack battery Li-ion battery cell: Samsung INR18650-35E (20.30Ah) / Samsung INR18650-29E (17.10Ah) Voltage (nominal): 36V (10S) Charging voltage: 42V With State of Charge indicator With Taillight

From €657.80*
BUNDLE
ENERpower 4S2P battery 14.4V-14.8V 10Ah 50E Li-Ion DC Connector Male Battery indicator for Breas Z1 Auto & Base
Prod. no.: 11798
The ENERpower 4S2P is a Li-ion battery with a charging and discharging with DC Connector Male. The battery has a nominal voltage of 14.4V-14.8V and is built up in a cube format (about 85 mm/72 mm/45 mm) You can use this battery as a replacement for the Breas Z1 Auto and Breas Z1 Base oxygen resuscitation apparatus. Since the device switches off at 14V, you must charge the battery as soon as the battery has 2 lights on the charge level indicator. You can order the appropriate charger and an extension cable in the bundle Highlights With a high-quality PCB (protective circuit) of 8A (115W) Rechargeable up to 500 times Open ends cable Cable length: About 10-15 cm High capacity for a longer runtime After 300 charging cycles still maintains approx. 80% of the original capacity IC Protection / PCB with protection against short-circuit, overload and deep discharge No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) High-quality battery cells with long service life and high cycle stability Technical data Min. capacity: 9800 mAh Type. Capacity: 10000 mAh Nominal voltage: 14.4V-14.8V Charging voltage: 16.8V Discharge Voltage: 12V Configuration 4S2P Cubic Weight: About 605 g. Length/width/height: 85/72/45 mm Protective circuit: PCB 8A Maximum power: 115 watts Charging/Discharging: Cable open ends Cable length: About 10-15 cmImportant:We would like to thank Mr. Gnep for his contribution with images

€75.00*
BUNDLE
ENERpower Adlershof Basic Battery 7.4V 6600 mAh with Round Plug
Prod. no.: 11503000501
ENERpower Adlershof 7.2V-7.4V Li-Ion battery with 6600 mAh This battery is assembled in 2 versions:Basic - without charge level indicatorPlus - with charge indicator (100% / 75% / 50% / 25% / empty) Highlights: With a high quality PCB (protection circuit) of 8A – 9A. Rechargeable up to 500 times With a DC-plug 5.5mm/2.1mm Cable length: spiral cable ca. 20 – 100 cm. Energy saving ability for a longer runtime Preserve 80% of its original capacity after 300 charging cycles. IC Protection / PCB with protection against short circuit, overcharge and deep discharge No Memory effect – charge your battery whenever you want. Environment friendly according to EU-Guidlines 2002/95/EG (RoHS) High quality battery cells with long lifespan and high stability Technical Details: Min. Capacity: 6400mAh  Typ. Capacity: 6600mAh  Nominal Voltage: 7.2V – 7.4V Charging Voltage: 8.4V Discharging Voltage: 6V Weight: ca. 195 g. Length / Width / Hight: 65 / 28 / 50 mm Protection circuit: PCB 8A – 9A (3 Mosfets) Cable length: ca. 32cm Compatibility Magicshine, P7-Led and many other bike-lights and helmet-lights, which use 7.2V-7.4V li-ion batteries.

Variants from €35.00*
€45.00*
Tip
BUNDLE
Motor Kit 250W + Battery 48V 10Ah softpack in frame bag (480Wh)
Prod. no.: 10996
General information  This set includes a motor kit from Tongsheng of the type TSDZ2 48V with 250W output power together with a softpack battery from ENERpower with 10Ah (13S2P) in a frame bag We assemble the battery in a special format (cell holder) so that it fits into the frame bag. If you have a back-pedal bike - choose the back-pedal motor. A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit. This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets. In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee. Technical documentation for all components can be found here Technical specifications Motor • Manufacturer: Tongsheng (China) • Model: TSDZ2 • Engine type: mid-engine • Wheel diameter: 16 '- 28' • Power: 250W - 350W • Voltage: 36V or 48V • Torque: 50N.m - 80N.m • Degree of support: 36% ~ 300% • Maximum speed: 25Km / h • Weight: 3.3 kg. Battery highlights • High quality production - Made in Germany • Just-in-time assembly • BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring) • Direct from the manufacturer • Rechargeable - Still 80% of original capacity after 300 charge cycles • No memory effect - charge the battery whenever you want • Environmentally friendly according to EU directive 2002/95 / EG (RoHS) Battery technical data: Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability) Configuration: 13S2P Nominal voltage: 48V (13S) Capacity: 10Ah Energy: 480Wh BMS: analog BMS with 20A continuous load Weight: approx. 2.05 kg. Load: XLR-3 Discharge: XT-60

€610.00*
BUNDLE
Motor Kit 250W + Battery 48V Hailong Plus 17.25Ah (830Wh)
Prod. no.: 4954820011
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Battery ENERpower Hailong Plus 48V 17,25Ah This Kit you can buy in 2 configuratione: 1. Normal Motor 2. Motor with coaster Break (back pedal) Display and Charger can be chosen from the list (additional fee) General Information This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers. Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2 Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V / 48V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display Type: VLCD5 Type: VLCD6 Type: XH-18 Type: TFT-560C Type: TFT 510S Type: TFT 500S-U Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Powered by Samsung INR18650-35E li-ion battery cells Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Pro Type: Bike-frame battery Li-ion battery cell: Samsung INR18650-35E Voltage (nominal): 48V Capacity: 17.25Ah Energy: 828Wh Configuration: 13S5P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30Afuse with XT90 power connector Charger In this set we offer 3 different chargers to choose from: Manufacturer: Modiary Input: 100 – 240V AC Output voltage: 54.6V CC/CV with end-of-charge voltage of 54.6V + 0.2V GS - tested safety according to § 21 ProdSG (corresponds with regard to the protection of the safety and health of persons) Efficiency: approx. 85% Model SPBC4802A MDA204 BC263480050 Output current 2A 3A 5A Power 110W 160W 273W Over current protection < 2.4A < 3.4A < 7A Short circuit protection 3W 3,5W 5,5W Reverse polarity protection yes

Variants from €785.00*
€800.00*
Tip
BUNDLE
Motor Kit 250W + Battery 52V 10Ah softpack in frame bag (520Wh)
Prod. no.: 11351
General information  This set includes a motor kit from Tongsheng of the type TSDZ2 52V with 250W output power together with a softpack battery from ENERpower with 10Ah (14S2P) in a frame bag We assemble the battery in a special format (cell holder) so that it fits into the frame bag. If you have a back-pedal bike - choose the back-pedal motor. A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit. This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets. In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee. Technical documentation for all components can be found here Technical specifications Motor • Manufacturer: Tongsheng (China) • Model: TSDZ2 • Engine type: mid-engine • Wheel diameter: 16 '- 28' • Power: 250W - 350W • Voltage: 52V • Torque: 50N.m - 80N.m • Degree of support: 36% ~ 300% • Maximum speed: 25Km / h • Weight: 3.3 kg. Battery highlights • High quality production - Made in Germany • Just-in-time assembly • BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring) • Direct from the manufacturer • Rechargeable - Still 80% of original capacity after 300 charge cycles • No memory effect - charge the battery whenever you want • Environmentally friendly according to EU directive 2002/95 / EG (RoHS) Battery technical data: Battery cell: LG Chem INR21700 50MT Configuration: 14S2P Nominal voltage: 52V (13S) Capacity: 10Ah Energy: 520Wh BMS: analog BMS with 20A continuous load Weight: approx. 2.55 kg. Load: XLR-3 Discharge: XT-60

€720.00*
BUNDLE
Motor Kit 250W + Battery Hailong Pro 48V 13.8Ah (660Wh)
Prod. no.: 4954810011
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Display + Battery ENERpower Hailong Pro 48V 13.8Ah. In this offer you can choose between 2 types of Motors: 1. Freewheel 2. With coaster Break (back Pedal function)   The suitable Display and charger you can choose from our different offers on the page (Bundles) General Information This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower Hailong battery pack. Charger and Display have to be chosen from our Bundle-offers Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal functionThe kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2 Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 48V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display We have several Displays for you to choose from. Manuals you can find here Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Powered by Samsung INR18650-35E li-ion battery cells Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Pro Type: Bike-frame battery Li-ion battery cell: Samsung INR18650-35 Voltage (nominal): 48V Capacity: 13.80Ah Energy: 660Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30Afuse with XT90 power connector Charger In this set we offer 3 different chargers to choose from: 2A (110W) / 3A (165W) / 4.5A (250W)                                            

Variants from €775.00*
€780.00*
Tip
BUNDLE
Motor Kit 36V 250W + Battery 36V Hailong Masada 15Ah (side realese)
Prod. no.: 11101
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Masada 36V 15Ah with side realese You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs. General Information This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display + Charger You can choose a suitable display and charger from our bundle offers Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Powered by Samsung INR18650-35E li-ion battery cells Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Masada Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700 M50T Voltage (nominal): 36V (37V) Capacity: 15Ah Energy: approx. 540Wh Configuration: 10S4P Internal resistance: < 75 mOhm Charging voltage: 42V End-of-discharge voltage: 30V Maximal charging: 5A Continuous discharge current: 20A = 720 Watt 10 Min. discharge current: 25A = 900 Watt 5 Sec. discharge current: 35A = 1260 Watt Constant load per cell: approx. 3.7A or 7A in peak load. Weight: approx. 3.25 Kg                                          

€685.00*

Most popular products by categories

E-Bike batteries

Tip
BUNDLE
HaiLong Reention Jaffa Bike-Frame Battery Li-Ion 52V 16Ah (830Wh)
Prod. no.: 1096001
ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Jaffa DIY 52V (14S) from own manufacturing 16Ah (830Wh) For motors from 250 Watts and up to 1050 Watts This 52V battery in the Hailong Reention Jaffa case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 70 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1050 watts of power, working in 52V (14S) systems.The battery holder is very small and therefore we implement the Fuse inside the Discharge Cable The On/Off button enable the user the turn the battery on and off as an additional feature. Highlights High quality assembly – Made in Germany Assembly Just-In-Time BMS with an integrated passive balancer BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 500 charging cycles, still maintaines about 70% of the original capacity No memory effect – charge your battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Details Li-Ion-cell: LG Chem INR18650-MH1 Voltage (nominal): 52V (50.4V-51.8V) Capacity:  16Ah Power: 830Wh Configuration: 14S5P Internal resistance: < 75 mOhm Charge Voltage: 58.8V End-of-discharge Voltage: 42V BMS continueous discharge current: 22A BMS 10 Min. discharge current: 25A BMS 5 Sec. discharge current: 30A Safety fuse: 30A Weight: approx. 3.95 Kg. Charging: Zenith IP67 3-Pins Discharging: Cable with fuse 30A with  XT-60

€395.00*
BUNDLE
Enerpower 36V Reention Bike-Frame Battery Babylon 28.80Ah (1050Wh)
Prod. no.: 1130602
ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Babylon DIY 36V (37V) from own   assembly in Berlin with LG INR18650-MH1 (28.8Ah) This Hailong Reention from Type Babylon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 91 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 10S batteries. Highlights High quality assembly – Made in Germany Assembly Just-In-Time BMS with an integrated passive balancer BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 800 charging cycles, still maintaines about 70% of the original capacity No memory effect – charge your battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Can be used on following 36V Motors: 250 Watt / 350 Watt / 500 Watt / 750 Watt Technical Details Li-Ion-cell:  LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 28.8Ah Power: 1050Wh Configuration: 10S9P Internal resistance: < 75 mOhm Charge Voltage: 42V End-of-discharge Voltage: 30V BMS continueous discharge current: 20A BMS 5 Sec. discharge current: 30A Safety fuse: 30A Weight: approx. 5.45 Kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharging: XT-60 / XT-90 / Anderson

€625.00*
BUNDLE
Enerpower 36V Reention Bike-Frame Battery Babylon 31Ah (1150Wh)
Prod. no.: 11305
ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Babylon DIY 36V (37V) from own   assembly in Berlin with LG INR18650-MJ1 (31Ah) This Hailong Reention from Type Babylon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 91 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 10S batteries. Highlights High quality assembly – Made in Germany Assembly Just-In-Time BMS with an integrated passive balancer BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 800 charging cycles, still maintaines about 70% of the original capacity No memory effect – charge your battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Can be used on following 36V Motors: 250 Watt / 350 Watt / 500 Watt / 750 Watt Technical Details Li-Ion-cell:  LG Chem INR18650-MJ1 Voltage (nominal): 36V (37V) Capacity: 31Ah Power: 1150Wh Configuration: 10S9P Internal resistance: < 75 mOhm Charge Voltage: 42V End-of-discharge Voltage: 30V BMS continueous discharge current: 20A BMS 5 Sec. discharge current: 30A Safety fuse: 30A Weight: approx. 5.45 Kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharging: XT-60 / XT-90 / Anderson

€725.00*
Tip
BUNDLE
Enerpower Frame Hailong Akkon 36V DP-5C 580Wh 16Ah (MH1)
Prod. no.: 1091002
ENERpower frame battery Li-Ion Hailong Akkon DP-5C DIY 36V (37V) from our own assembly line with 16Ah (580Wh) For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Akkon DP-5C housing, which we assemble, can be mounted on the frame or on the luggage rack. The batteries are assembled in Berlin in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90, XT60, or Anderson connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.This battery has a charge level indicator and an on / off switch Highlights High quality assembly - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charging cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60, XT-90, Anderson PowerPoleDimensions (with bracket)Length: approx. 368 mmWidth: 90 mmHeight: 96 mm

Variants from €340.00*
€345.00*
BUNDLE
Enerpower Hebron Frame 36V 35Ah BMS 20A 1260Wh
Prod. no.: 11294
ENERpower Hebron battery 36V for the Frame | Format 10S7P | Energy 1260Wh | Capacity  35 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general informationThis 36V battery in the Hailong Hebron housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith 3-Pins Charging socketunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 70 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 500 charge cycles (according to LG Chem battery specification)    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 36V    Capacity: 35Ah    Energy: 1260Wh    Configuration: 10S7P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx. 5.20 kg (without bracket)    Charging: DC 5,5 x 2,1 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 156 mm

From €488.25*
BUNDLE
Enerpower Hebron Frame 48V 25Ah BMS 20A 1200Wh
Prod. no.: 11298
ENERpower Hebron battery 48V for the Frame | Format 13S5P | Energy 1200Wh | Capacity  25 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general informationThis 48V battery in the Hailong Hebron housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith 3-Pins Charging socketunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 70 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 500 charge cycles (according to LG Chem battery specification)    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 48V    Capacity: 25Ah    Energy: 1200Wh    Configuration: 13S5P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx. 5 kg (without bracket)    Charging: DC 5.5 x 2.1 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 155 mm

From €488.25*
BUNDLE
Enerpower Hebron Frame 52V 25Ah BMS 20A 1295Wh
Prod. no.: 1134402
ENERpower Hebron battery 48V for the Frame | Format 14S5P | Energy 1295Wh | Capacity  25 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general informationThis 48V battery in the Hailong Hebron housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith 3-Pins Charging socketunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 70 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 500 charge cycles (according to LG Chem battery specification)    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 52V    Capacity: 25Ah    Energy: 1295Wh    Configuration: 14S5P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx. 5.25 kg (without bracket)    Charging: DC 5.5 x 2.1 mm    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions    Length: 368 mm    Width: 95 mm    Height: 156 mm

From €506.85*
Tip
BUNDLE
Enerpower Jericho Frame 36V 16Ah (580Wh) / 20Ah (720Wh) BMS 20A
Prod. no.: 1053205
ENERpower soft pack battery 36V | Format 10S4P | Energy 580Wh / 720 Wh | Capacity 16Ah / 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700 M50T, Molicel P42AImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Molicel P42A / LG Chem INR21700 M50T    Voltage (nominal): 36V    Capacity: 20Ah    Energy: 720Wh    Configuration: 10S4P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: Zenith 3-Pins    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

Variants from €365.00*
€370.00*
BUNDLE
Enerpower Jericho Frame 48V 12Ah (580Wh) / 15A (720Wh)h BMS 20A
Prod. no.: 10530
ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 12Ah, or 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T, or Molicel P42AImportant general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a special connector 3-Pins from Zenithunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR21700-50E    Voltage (nominal): 48V    Capacity: 15Ah    Energy: 720Wh    Configuration: 13S3P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: 3-Pins Zenith    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

Variants from €365.00*
€385.00*
BUNDLE
Enerpower Jericho Frame 48V 15Ah (720Wh) BMS 20A - LB
Prod. no.: 11457
ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Round Plug DCunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 48V    Capacity: 15Ah    Energy: 720Wh    Configuration: 13S3P    Internal resistance: <75 mOhm    Charging voltage: 54.6V    Final discharge voltage: 39V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: DC    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

From €346.50*

E-Bike-Motor kits

Tip
BUNDLE
720Wh Motor Kit 36V 250W + Battery 36V Hailong Jericho 20Ah
Prod. no.: 11122
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Jericho 36V 20Ah You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs. General Information This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display + Charger You can choose a suitable display and charger from our bundle offers Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Jericho Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700 M50T Voltage (nominal): 36V (37V) Capacity: 20Ah Energy: approx. 720Wh Configuration: 10S4P Internal resistance: < 75 mOhm Charging voltage: 42V End-of-discharge voltage: 30V Maximal charging: 5A Continuous discharge current: 20A = 720 Watt 10 Min. discharge current: 25A = 900 Watt 5 Sec. discharge current: 35A = 1260 Watt Constant load per cell: approx. 3.7A or 7A in peak load. Weight: approx. 3.25 Kg                                          

€725.00*
Tip
BUNDLE
900Wh Motor Kit 36V 250W TSDZ2B + Battery 36V Hailong Megiddo 25Ah
Prod. no.: 112251
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Megiddo 36V 25Ah You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs. General Information This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2B has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display + Charger You can choose a suitable display and charger from our bundle offers Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Megiddo Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700 M50T Voltage (nominal): 36V (37V) Capacity: 25Ah Energy: approx. 900Wh Configuration: 10S5P Internal resistance: < 75 mOhm Charging voltage: 42V End-of-discharge voltage: 30V Maximal charging: 5A Continuous discharge current: 20A = 720 Watt 10 Min. discharge current: 25A = 900 Watt 5 Sec. discharge current: 35A = 1260 Watt Constant load per cell: approx. 3.7A or 7A in peak load. Weight: approx. 4 Kg                                          

Variants from €745.00*
€760.00*
Tip
BUNDLE