ENERpower soft-pack battery 24V in format 7S3P | Capacity 15Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50S
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging and discharging via a cable with XT-60 connector (male). The Smart BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 15 to 20 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 Watt - 750 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: Samsung SDI INR21700-50S
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 15 Ah
Power: approx. 375 Wh
Configuration: 7S3P
Construction: 7 x 3
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 30A = 750 wattsMaximal Charge: < 10AWeight: Approx. 1.75 kg.
Dimensions
Length: 170 mm Länge
Width: 75 mm – 95 mm
Height: 75 mm
ENERpower soft-pack battery 24V in format 7S6P | Capacity 30Ah | for Pedelecs, eBikes DIY | withWith LG INR21700-50M.
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 Watt / 350 Watt / 450 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: LG INR21700-50M
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 30 Ah
Power: approx. 720 Wh
Configuration: 7S6P
Construction: 7 x 6
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 3.2 kg.
Dimensions
Length: 154 mm Länge
Width: 132 mm – 142 mm
Height: 70 mm
ENERpower soft-pack battery 24V in format 7S6P | Capacity 30Ah | for Pedelecs, eBikes DIY | withWith LG INR21700-50M.
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 Watt / 350 Watt / 450 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: LG INR21700-50M
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 30 Ah
Power: approx. 720 Wh
Configuration: 7S6P
Construction: 7 x 6
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 3.2 kg.
Dimensions
Length: 154 mm Länge
Width: 132 mm – 142 mm
Height: 70 mm
ENERpower Softpack battery 24V in format 7S7P | 840Wh | capacity 35Ah | for Pedelecs, eBikes DIY | with LG Chem 50M.
Important General Information
This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.Thus, this battery is also suitable for motors with 1000 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.In this battery we have also integrated a charge indicator. In 5 levels (empty / 25% / 50% / 75% / full) you can easily read the battery condition.
Compatible with 24V motors
250 watts / 350 watts / 500 watts / 750 watts / 1000 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Samsung SDI INR18650-35E Li-Ion Cells –> 10A continuous load
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion battery cell:LG Chem INR21700 50M
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 35 Ah
Energy: approx. 840 Wh
Configuration: 7S7P
Format: 7×7
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 20A = 480 Watt
10 Min. discharge current: 40A = 1000 Watt
5 Sec. discharge current: 45A = ca. 1125Watt
Weight: approx. 3.65 kg.
Dimensions
Length: 154 mm Länge
Width: 154 mm – 165 mm
Height: 70 mm
ENERpower Softpack battery 24V in format 7S10P | 1260Wh | capacity 50Ah | for Pedelecs, eBikes DIY, Wheel Chair | with Samsung 50E.
Important General Information
This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.Thus, this battery is also suitable for motors with 1000 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 watts / 350 watts / 500 watts / 750 watts / 1000 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion battery cell: Samsung SDI INR21700-50E
Voltage (nominal): 24V (25.2V – 25.9V)
Capacity: 50Ah
Energy: approx. 1260 Wh
Configuration: 7S10P
Format: 10 ×7
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-of-discharge voltage: 21V
Continuous discharge current: 40A = 1000 Watt
5 Sec. discharge current: 50A = ca. 1200 Watt
Weight: approx. 5.40 kg.SB50 Connector
Dimensions
Length: 230 mm Länge
Width: 160 mm – 175 mm
Height: 70 mm
ENERpower Softpack battery 48V in format 13S5P | 1200 Wh | capacity 25 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E /
INR21700-M50LT
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E /
INR21700-M50LT
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 25 Ah
Power: approx. 1200 Wh
Configuration: 13S5P (set up: 10×6)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: 4.65 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 300 mm
Width: 110 mm – 125 mm
Height: 72 mm
ENERpower Softpack battery 48V in format 13S6P | 1440 Wh | capacity 30 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E /
LG INR21700-M50T
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell:
LG INR21700-M50T / INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 30 Ah
Power: approx. 1440 Wh
Configuration: 13S6P (set up: 13×6)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: 6.65 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 286 mm
Width: 132 mm – 145 mm
Height: 72 mm