Enerpower Condor - The Tiny Monster
The ENERpower Condor, with its CREE XM-L2 U2 (1000 lumens), is one of the most powerful lamps in its tiny dimension in terms of its light weight.
With only 64 grams, the ENERpower Condor can be comfortably used as a head lamp (helmet lamp).
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The CREE XM-L2 UL is both powerful and economical. With maximum consumption of 1.8A (around 6.5 watts), this version is even 20% more economical compared to the predecessor CREE.
The Switching between the operating levels is via the illuminated button. If the battery level is too low, the lamp regulates the level (mode) down automatically.
Certified according to IPX4, the Condor is water-splash-proof and can be used in the outdoor without any problem.
The design of the lamp housing directs the heat generated by the LED head lightly on the surface and prevents a negative impact on the light output.
The ENERpower Condor is powered by a 3.6V Li-Ion rechargeable battery (see our compatible batteries below)
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
Technical Details:
LED
CREE XM-L2 U2
Lumen
Up to 1000
Body-Material
Aluminum alloy
Dimensions
45 x 45 x 26 mm
Weight
64 g.
Cable length
Ca. 75 cm
Operation Modes
5: 100% / 70% / 40% / 10% & blink-mode (strobe)
Water Resistance
IPX-4
Operating Voltage
2.5V-4.2V
Working Current
< 1.8A
Battery indicator
Green: fully Power
Blue: around 50% remains
Red: almost empty, or too hot surface
Enerpower Condor - The Tiny Monster
The ENERpower Condor, with its CREE XM-L2 U2 (1000 lumens), is one of the most powerful lamps in its tiny dimension in terms of its light weight.
With only 64 grams, the ENERpower Condor can be comfortably used as a head lamp (helmet lamp).
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The CREE XM-L2 UL is both powerful and economical. With maximum consumption of 1.8A (around 6.5 watts), this version is even 20% more economical compared to the predecessor CREE.
The Switching between the operating levels is via the illuminated button. If the battery level is too low, the lamp regulates the level (mode) down automatically.
Certified according to IPX4, the Condor is water-splash-proof and can be used in the outdoor without any problem.
The design of the lamp housing directs the heat generated by the LED head lightly on the surface and prevents a negative impact on the light output.
The ENERpower Condor is powered by a 3.6V Li-Ion rechargeable battery (see our compatible batteries below)
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
Technical Details:
LED
CREE XM-L2 U2
Lumen
Up to 1000
Body-Material
Aluminum alloy
Dimensions
45 x 45 x 26 mm
Weight
64 g.
Cable length
Ca. 75 cm
Operation Modes
5: 100% / 70% / 40% / 10% & blink-mode (strobe)
Water Resistance
IPX-4
Operating Voltage
2.5V-4.2V
Working Current
< 1.8A
Battery indicator
Green: fully Power
Blue: around 50% remains
Red: almost empty, or too hot surface
Enerpower Eagle - The Light-Monster
The ENERpower Eagle, with its 2 CREE XM-L2 U2 throws an enormous light of 2000 lumens and can be used as a headlamp, or helmet lamp
The CREE XML U2 is both powerful and economical. With maximum consumption of 2.5A (18 watts), this version is even 20% more economical compared to the predecessor CREE.
The attachment with a rubber ring can be done easily onto the helmet. With its light weight and minimal size, the ENERpower Eagle is a true light monster!
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The well-covered electronics of the ENERpower Eagle regulate the luminosity as a function of the temperature in 4 operating modes:
Turbo: 100%
High: 70%
Medium: 40%
Low: 10%
In separate mode (own button), the lamp can go into blinking-mode (strobe). This feature is
more of a benefit to photographers or hunters.
The ENERpower Eagle is robust with an aluminum alloy housing and water resistant to IXP-4 (protection against splashes of water on all sides).
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
LED
CREE XM-L2 U2
Lumen
Up to 2000
Body-Material
Aluminum Alloy
Dimensions
49 x 48.6 x 24 mm
Weight
100 g.
Cable length
Around 75 cm
Operation Modes
5 : 100% / 70% / 40% / 10% & blink (Strobe)
Operating Voltage
5V-8.4V
Operating Current
2.2A-2.5A
Water Resistance
IPX-4
Battery indicator
Green: 70% - 100%
Blue: 40%-70%
Red: 10%-40%
Flashing Red: < 10%
Enerpower Eagle - The Light-Monster
The ENERpower Eagle, with its 2 CREE XM-L2 U2 throws an enormous light of 2000 lumens and can be used as a headlamp, or helmet lamp
The CREE XML U2 is both powerful and economical. With maximum consumption of 2.5A (18 watts), this version is even 20% more economical compared to the predecessor CREE.
The attachment with a rubber ring can be done easily onto the helmet. With its light weight and minimal size, the ENERpower Eagle is a true light monster!
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The well-covered electronics of the ENERpower Eagle regulate the luminosity as a function of the temperature in 4 operating modes:
Turbo: 100%
High: 70%
Medium: 40%
Low: 10%
In separate mode (own button), the lamp can go into blinking-mode (strobe). This feature is
more of a benefit to photographers or hunters.
The ENERpower Eagle is robust with an aluminum alloy housing and water resistant to IXP-4 (protection against splashes of water on all sides).
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
LED
CREE XM-L2 U2
Lumen
Up to 2000
Body-Material
Aluminum Alloy
Dimensions
49 x 48.6 x 24 mm
Weight
100 g.
Cable length
Around 75 cm
Operation Modes
5 : 100% / 70% / 40% / 10% & blink (Strobe)
Operating Voltage
5V-8.4V
Operating Current
2.2A-2.5A
Water Resistance
IPX-4
Battery indicator
Green: 70% - 100%
Blue: 40%-70%
Red: 10%-40%
Flashing Red: < 10%
Enerpower Falcon - The All-Rounder
The ENERpower Falcon is a very small and light weight universal headlamp that can also be attached to the helmet.
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp (2 versions). A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
With a thrifty CREE XPG2 R5, this torchlight is powered by a 3.6V Li-ion rechargeable battery. With a maximal consumption of 1.8A (approx. 6W) this torchlight can produce up to 800 lumens.
The canopied electronics of the ENERpower Falcon regulates the light strength according to the temperature in 4 operation modes:
Turbo: 100%
High: 70%
Medium: 40%
Low: 10%
The Switching between the operating levels is via the illuminated button. If the battery level
is too low, the lamp regulates the level (mode) down automatically. A special feature of the ENERpower Falcon is the IP65-Certificate (dust and sprayed water resistance). The ENERpower Falcon can prtactically be used anywhere outdoor.
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
Technical Details:
LED
Cree XPG2 R5
Lumen
Up to 800
Body-Material
Aluminum alloy
Dimensions
34 x 35 x 34 mm
Cable Length
Around 75 cm
Weight
62 g.
Operation Modes
4: 100% / 70% / 40% / 10%
Operating Voltage
2.5V-4.2V
Working Current
< 1.8A
Battery indicator
Green: fully Power
Red: around 50% remain
Red & Flash: almost empty
Enerpower Falcon - The All-Rounder
The ENERpower Falcon is a very small and light weight universal headlamp that can also be attached to the helmet.
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp (2 versions). A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
With a thrifty CREE XPG2 R5, this torchlight is powered by a 3.6V Li-ion rechargeable battery. With a maximal consumption of 1.8A (approx. 6W) this torchlight can produce up to 800 lumens.
The canopied electronics of the ENERpower Falcon regulates the light strength according to the temperature in 4 operation modes:
Turbo: 100%
High: 70%
Medium: 40%
Low: 10%
The Switching between the operating levels is via the illuminated button. If the battery level
is too low, the lamp regulates the level (mode) down automatically. A special feature of the ENERpower Falcon is the IP65-Certificate (dust and sprayed water resistance). The ENERpower Falcon can prtactically be used anywhere outdoor.
This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
Technical Details:
LED
Cree XPG2 R5
Lumen
Up to 800
Body-Material
Aluminum alloy
Dimensions
34 x 35 x 34 mm
Cable Length
Around 75 cm
Weight
62 g.
Operation Modes
4: 100% / 70% / 40% / 10%
Operating Voltage
2.5V-4.2V
Working Current
< 1.8A
Battery indicator
Green: fully Power
Red: around 50% remain
Red & Flash: almost empty
Enerpower HAWK - Small, powerful, multi-functional The ENERpower HAWK with two CREE XM-L U2 brings a proud 2000 lumens.
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The well-covered electronics of the ENERpower HAWK regulate the luminosity as a function of the temperature in 4 operating modes:
Turbo: 100%
High: 70%
Medium: 40%
Low: 10%
The ENERpower HAWK is robust with aluminum alloy housing and waterproof according to IXP-4 (protection against splash water on all sides). This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
Technical Details:
LED
CREE XM-L U2
Lumen
Up to 2000
Body-Material
Aluminum alloy
Dimensions
53 x 53 x 24 mm
Cable length
Ca. 75 cm
Weight
126 g.
Operation Modes
4: 100% / 70% / 40% / 10%
Operating Voltage
5V – 8.4V
Working Current
2.2A – 2.5A
Battery indicator
Green: fully power
Blue: around 50% remains
Red: almost empty, or too warm
Enerpower HAWK - Small, powerful, multi-functional The ENERpower HAWK with two CREE XM-L U2 brings a proud 2000 lumens.
With an impressive range of accessories, the lamp can be used as both a head lamp and a helmet lamp. A holder for bicycles is also included, but the lamp is not Road compliant and use is only permitted off-road.
The well-covered electronics of the ENERpower HAWK regulate the luminosity as a function of the temperature in 4 operating modes:
Turbo: 100%
High: 70%
Medium: 40%
Low: 10%
The ENERpower HAWK is robust with aluminum alloy housing and waterproof according to IXP-4 (protection against splash water on all sides). This lamp comes in 2 versions:
1. GoPro version with mounts for helmet and bike
2. Headlamp version with a headband
Technical Details:
LED
CREE XM-L U2
Lumen
Up to 2000
Body-Material
Aluminum alloy
Dimensions
53 x 53 x 24 mm
Cable length
Ca. 75 cm
Weight
126 g.
Operation Modes
4: 100% / 70% / 40% / 10%
Operating Voltage
5V – 8.4V
Working Current
2.2A – 2.5A
Battery indicator
Green: fully power
Blue: around 50% remains
Red: almost empty, or too warm
€50.99*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...