Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 60 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge)  in this Case. Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR18650-MH1    Voltage (nominal): 36V (37V)    Capacity: 19.20Ah    Configuration: 10S6P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Fuse: 30A    Weight: approx.2.75 kg.    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 19.20Ah1 x luggage rack FME0006

Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 60 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge)  in this Case. Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR18650-MH1    Voltage (nominal): 36V (37V)    Capacity: 19.20Ah    Configuration: 10S6P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Fuse: 30A    Weight: approx.2.75 kg.    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 19.20Ah1 x luggage rack FME0006

Important general informationThis 36V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge)  in this Case. The back light is operated via its own On/Off button. Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Samsung SDI INR18650-35E Li-Ion cells     Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI INR18650-35E    Voltage (nominal): 36V (37V)    Capacity: 20.30Ah    Configuration: 10S6P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Fuse: 30A    Weight: approx.3.35 kg.    Charging: DC round plug 5.5 mm / 2.5 mm    Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 20.30Ah with INR18650-35E1 x luggage rack FME0006

ENERpower soft pack battery 36V | Format 10S4P | Energy 580Wh / 720 Wh | Capacity  20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700 M50T, Molicel P42AImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell:  LG Chem INR21700 M50T    Voltage (nominal): 36V    Capacity: 20Ah    Energy: 720Wh    Configuration: 10S4P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.3.50 kg (without bracket)    Charging: Zenith 3-Pins    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector) dimensions    Length: 368 mm     Width: 95 mm    Height: 103 mm

ENERpower Megiddo battery 36V for the Frame | Format 10S5P | Energy 720 Wh - 900Wh | Capacity 25 Ah | for pedelecs, eBikes DIY | with Samsung  INR21700-50EImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Zenith IP67 Connector. We have an adapter from XLR-3 to Zenith connector, so all youneed is a charger with XLR3 connectorunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights    High quality production - Made in Germany    Manufacturing just-in-time    BMS with an integrated passive balancer    BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring)    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 300 charge cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: Samsung SDI  INR21700-50E    Voltage (nominal): 36V    Capacity: 25Ah    Energy: 900Wh    Configuration: 10S5P    Internal resistance: <75 mOhm    Charging voltage: 42V    Final discharge voltage: 30V    BMS continuous discharge current: 22A    BMS 10 min. Discharge current: 25A    BMS 5 seconds discharge current: 30A    Safety Fuse: 30A    Weight: approx.4.20 kg (without bracket)    Charging: Zenith IP67    Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connectordimensions    Length: 368 mm    Width: 95 mm    Height: 122 mm

ENERpower Softpack battery 36V, format 10S2P, square) | 360 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | LG Chem M50. Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 540 watts / 700 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) With battery cells INR21700-M50 from LG Chem Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: INR21700-M50 from LG Chem Voltage (nominal): 36V (37V) Capacity: 10 Ah Power: approx. 360 Wh Configuration: 10S2P (set up: 5x4) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Continuous discharge Current: 15A = 720 watts 10 minutes discharge Current: 20A = 900 watts 5 seconds discharge current: 25A = 1080 watts Weight: 1.6 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 110 mm Width: 88 mm – 100 mm Height: 72 mm

Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 540 watts / 750 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) With battery cells INR21700-M50 from LG Chem Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG Chem INR21700-M50 Voltage (nominal): 36V (37V) Capacity: 15 Ah Power: approx. 540 Wh Configuration: 10S3P (set up: 10×3 - rectangular) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Maximal charge current: 5A Continuous discharge Current: 20A = 720 watts 10 minutes discharge Current: 25A = 900 watts 5 seconds discharge current: 35A = 1260 watts Continuous load per cell: approx. 4A or approx. 8A at peak load Weight: 2.5 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 220 mm Width: 69 mm – 80 mm Height: 71 mm

ENERpower softpack battery 36V 16Ah Ah for eBikes in Enerprof frame bag Important General Information This 36V e-bike battery in softpack is manufactured for insertion in carrier bag . With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded Smart BMS 30A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. This battery is also suitable for engines with up to 1080 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time Smart BMS with integrated passive balancer (4.1V pro rechargeable cell) Smart BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Power: about 580Wh Configuration: 10S5P Internal resistance: < 75 mOhm Charge Voltage: 42V Maximum Charging current: 8A End-of-Discharge Voltage: 30V Continuous Discharge Current: 30A = 1080watts Weight: approx.  3.2Kg. (Battery only)Connector: XT-90 (XT-60, or Anderson Powerpole per demand) The Enerpower frame bag is a collaboration between Enerdan and Roswheel in order to better design the Attack frame bag for use with eBike batteries. The new frame bag is: • Waterproof • Has 5 x Velcro fasteners can be attached at any point • Can be opened in 240 degrees • Suitable as a frame bag for batteries up to 5 kg. • Is approx. 350 mm long, approx. 130 mm high and 90 mm wide • Fits batteries made with 21700 format battery cells. • Has a larger opening for charging and discharging cables Compatibility Compatible with engines 250 watts and up to 1080 watts

ENERpower Softpack battery 36V in format 10S6P square | 695 Wh | capacity 19.2 Ah | for Pedelecs, eBikes DIY | with MH1. Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motorsUp to 720 WattHighlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.2 Ah Power: approx. 695 Wh Configuration: 10S6P (set up: 10x6) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Charge Max.: 5A Continuous discharge Current: 20A = 720 watts 5 seconds discharge current: 30A = 1080 watts Weight: approx. 3.25 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 (XT-60, or Anderson Powerpole per demand) Dimensions Length: 205 mm Width: 125 mm – 140 mm Height: 65-68 mm

ENERpower Softpack battery 36V, format 10S4P | 720 Wh | capacity 20 Ah | for Pedelecs, eBikes DIY |  INR21700-50E. Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 7 cells are used on the longest side (around 165 mm). We manufacture this type of battery in the format 10S4P (construction 7×6) In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 540 watts / 750 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) With battery cells  INR21700-50E Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell:  INR21700-50E Voltage (nominal): 36V (37V) Capacity: 20 Ah Power: approx. 720 Wh Configuration: 10S4P (set up: 7×6 - Square) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Maximal charge current: 5A Continuous discharge Current: 20A = 720 watts 10 minutes discharge Current: 25A = 900 watts Weight: 3.1 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson Dimensions Length: 235 mm Width: 100 mm – 110 mm Height: 71 mm

ENERpower softpack battery 36V 25Ah for eBikes, with INR21700-50E battery cells from Samsung SDI in Enerprof frame bag Important General Information This 36V e-bike battery in softpack is manufactured for insertion in carrier bag . With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly. The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included. A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure. This battery is also suitable for engines with up to 750 watts of power. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. Battery – Highlights High-quality manufacturing – made in Germany Assembly just-in-time BMS with integrated passive balancer (4.1V pro rechargeable cell) BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring) Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability) directly from the manufacturer Rechargeable – After 300 charging cycles maintains 80% of the original capacity No memory effect – charge the battery whenever you want Environmentally friendly according to EU Directive 2002/95/EC (RoHS) Battery – Technical Data Li-ion Cell: Samsung SDI INR21700-50E Voltage (nominal): 36V (37V) Capacity: 25Ah Power: about 900Wh Configuration: 10S5P Internal resistance: < 75 mOhm Charge Voltage: 42V Maximum Charging current: 5A End-of-Discharge Voltage: 30V Continuous Discharge Current: 20A = 720 watts 10 seconds 30A: approx. 1080 watts Weight: approx. 3.85Kg. (Battery only) Compatibility Compatible with engines 250 watts / 500 watts / 750 watts