ENERpower Softpack battery 48V in format 13S5P | 1200 Wh | capacity 25 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E / INR21700-M50LT Important General Information The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc. In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc. The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 48V motors 250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: Samsung SDI INR21700-50E / INR21700-M50LT Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 25 Ah Power: approx. 1200 Wh Configuration: 13S5P (set up: 10×6) Internal resistance: < 75 mOhm Charge voltage: 54.6V End-of-discharge voltage: 39V Continuous discharge Current: 30A = 1440 watts 5 seconds discharge current: 40A = 1920 watts Weight: 4.65 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 300 mm Width: 110 mm – 125 mm Height: 72 mm

ENERpower Softpack battery 48V in format 13S6P | 1440 Wh | capacity 30 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E / LG INR21700-M50T Important General Information The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc. In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc. The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 48V motors 250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG INR21700-M50T / INR21700-50E Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 30 Ah Power: approx. 1440 Wh Configuration: 13S6P (set up: 13×6) Internal resistance: < 75 mOhm Charge voltage: 54.6V End-of-discharge voltage: 39V Continuous discharge Current: 30A = 1440 watts 5 seconds discharge current: 40A = 1920 watts Weight: 6.65 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 286 mm Width: 132 mm – 145 mm Height: 72 mm