Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Jericho 36V 20Ah
You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs.
General Information
This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display + Charger
You can choose a suitable display and charger from our bundle offers
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Jericho
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR21700 M50T
Voltage (nominal): 36V (37V)
Capacity: 20Ah
Energy: approx. 720Wh
Configuration: 10S4P
Internal resistance: < 75 mOhm
Charging voltage: 42V
End-of-discharge voltage: 30V
Maximal charging: 5A
Continuous discharge current: 20A = 720 Watt
10 Min. discharge current: 25A = 900 Watt
5 Sec. discharge current: 35A = 1260 Watt
Constant load per cell: approx. 3.7A or 7A in peak load.
Weight: approx. 3.25 Kg
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Megiddo 36V 25Ah
You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs.
General Information
This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2B has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display + Charger
You can choose a suitable display and charger from our bundle offers
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Megiddo
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR21700 M50T
Voltage (nominal): 36V (37V)
Capacity: 25Ah
Energy: approx. 900Wh
Configuration: 10S5P
Internal resistance: < 75 mOhm
Charging voltage: 42V
End-of-discharge voltage: 30V
Maximal charging: 5A
Continuous discharge current: 20A = 720 Watt
10 Min. discharge current: 25A = 900 Watt
5 Sec. discharge current: 35A = 1260 Watt
Constant load per cell: approx. 3.7A or 7A in peak load.
Weight: approx. 4 Kg
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 36V + Battery ENERpower Gath for the rack in 2 sizes (17.10Ah and 20.30Ah)
Charger and Display you can choose out from the List of available products
General Information
This kit includes a Tongsheng TSDZ2 36V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Gath in 36V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine has a back pedal function, so-called Coaster breakThe kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor type: mid-motor with Coaster Break
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Gath Rack battery
Li-ion battery cell: Samsung INR18650-35E (20.30Ah) / Samsung INR18650-29E (17.10Ah)
Voltage (nominal): 36V (10S)
Charging voltage: 42V
With State of Charge indicator
With Taillight
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 36V + Battery ENERpower Gath for the rack in 2 sizes (17.10Ah and 20.30Ah)
Charger and Display you can choose out from the List of available products
General Information
This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Gath in 36V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Gath Rack battery
Li-ion battery cell: Samsung INR18650-35E (20.30Ah) / Samsung INR18650-29E (17.10Ah)
Voltage (nominal): 36V (10S)
Charging voltage: 42V
With State of Charge indicator
With Taillight
Tongsheng TSDZ2B 36V 250W Mid-drive Motor 8-Pins Version with Throttle (Starting Aid) + VLCD5 Display + Accessories + Nablus Battery for Luggage Rack
This version is the 8-Pins Version and comes with a throttle and a VLCD5 display.
The suitable charger you have to choose in addition from the bundle offers
The Nablus battery does not come with a rear light and battery level indicator.
General Information about the Motor:
Tongsheng motors are known for their easy and uncomplicated installation. The motor already has the controller integrated, and the kit includes all necessary accessories such as cables, speed sensor, etc. You can choose the appropriate display from our bundle offer. This motor complies with the requirements of road traffic regulations and does not require approval. The maximum speed is preset to 25 km/h. The TSDZ2 has a built-in torque sensor that regulates the level of assistance. The offered mid-drive motor does NOT have a backpedal function!
The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket housing with dimensions: housing width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom brackets. This motor has a freewheel, and there are no brake possibilities through the pedals.
The TSDZ2B version has two freewheel bearings. In the off state, the resistance of the motor is lower, making pedaling easier.
This version of the motor is the 8-Pins Version, which features a throttle. The throttle serves as a starting aid (up to 6 km/h) and makes this motor version ideal for cargo bikes, utility bikes, etc.
General Information about the Battery:
This 36V battery in the Nablus luggage rack housing, which we assemble in Berlin, comes with a frame for the luggage rack. The batteries are made in plastic cell holders. Charging is enabled with a DC round connector (5.5 mm / 2.5 mm), and discharging is done through the holder (detachable from the battery) with an XT90 connector. This case can accommodate up to 60 18650 battery cells. With a BMS capable of handling continuous loads between 20A-22A, this battery is suitable for motors with up to 750W power operating in 36V (37V) systems. There is an on/off switch located on the battery, and this case does not have a battery level indicator.
Technical Data: Motor
Manufacturer: Tongsheng (China)
Model: TSDZ2B
Motor Type: Mid-drive Motor
Wheel Diameter: 16' - 28'
Power: 250W-350W
Voltage: 48V
Torque: 50N.m - 80N.m
Level of Assistance: 36% ~ 300%
Maximum Speed: 25Km/h
Weight: 3.3 Kg.
Battery Technical Data:
Li-Ion Cell: INR18650-29E / INR18650-MH1 / INR18650-35E
Voltage (nominal): 36V (37V)
Capacity: 17.10Ah / 19.20Ah / 20.30Ah
Configuration: 10S6P
Internal Resistance: < 75 mOhm
Charging Voltage: 42V
Discharge Cut-off Voltage: 30V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Fuse: 30A
Weight: approximately 3.35 Kg.
Charging: DC Round Connector 5.5 mm / 2.5 mm
Discharging: Cable with 30A Fuse with XT60 High-Current Connector (Counterpart included)
Dimensions:
Length: approximately 425 mm
Width: approximately 156 mm
Height: 64 mm
Content:
1 x Tongsheng TSDZ2B motor 8-Pins
1 x Speed sensor + Cable with splitter
1 x Light cable
1 x Tool
2 x Bicycle cranks
1 x VLCD5 Display
1 x Throttle
1 x Nablus Battery for Luggage Rack (depending on selection)
1 x Luggage Rack FME0006
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Battery ENERpower nablus for the rack in 2 sizes (17.10Ah and 20.3Ah).
Display and Charger are to be added from the bundle offers (costs are in addition)
Further you can choose between a Freewheel Version, or a version with a coaster break
General Information
This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Nablus in 36V, Display and a charger (that you have to choose)
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, VLCD6, XH-18, TFT500S-U, TFT560C
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Softpack battery in bag
Li-ion battery cell: Samsung INR18650-35E (20.3Ah) / Samsung INR18650-29E (17.1Ah)
Voltage (nominal): 36V (37V)
Charging voltage: 42V
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Display (2 types to choose from)+ Battery ENERpower Gath for the rack in 2 sizes (11,60Ah and 13.80Ah).
Suitable Charger and Display must be chosen with additional costs from our different offers.
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Gath in 48V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine have a back pedal function (Coaster Break)The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Coaster Break
Display
Type: VLCD5, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Gath Rack battery
Li-ion battery cell: Samsung INR18650-35E (13.80Ah) / Samsung INR18650-29E (11.60Ah)
Voltage (nominal): 48V (13S)
Charging voltage: 54.6V
With State of Charge indicator
With Taillight
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Display (2 types to choose from)+ Battery ENERpower nablus for the rack in 2 sizes (11,60Ah and 13.80Ah) + Charger 2A, 3A, or 5A
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Nablus in 48V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does have a back pedal function (Coaster Break)The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Rack Battery Nablus
Li-ion battery cell: Samsung INR18650-35E (13.80Ah) / Samsung INR18650-29E (11.60Ah)
Voltage (nominal): 48V (13S)
Charging voltage: 54.6V
Modify your own Kit
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Display (2 types to choose from)+ Battery ENERpower nablus for the rack in 2 sizes (11,60Ah and 13.80Ah)
Suitable Display and Chargers can bee added from our different Bundle offers
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Nablus in 48V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Gath Rack battery
Li-ion battery cell: Samsung INR18650-35E (13.80Ah) / Samsung INR18650-29E (11.60Ah)
Voltage (nominal): 48V (13S)
Charging voltage: 54.6V
With State of Charge indicator
With Taillight
Modify your own Kit (additional costs)
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W Edition 2020 + Display (3 types to choose from)+ Battery ENERpower nablus for the rack in 2 sizes (11,60Ah and 13.80Ah) + Charger 2A, 3A, or 5A to choose from as well as suitable 6-Pins displays
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower rechargeable Li-ion rack battery Nablus in 48V, Display and a charger.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
42T
Display
Type: VLCD5, VLCD7, or XH-18
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung SDI
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
General Information
Manufacturer: ENERpower (Germany)
Type: Softpack battery in bag
Li-ion battery cell: Samsung INR18650-35E (13.80Ah) / Samsung INR18650-29E (11.60Ah)
Voltage (nominal): 48V (13S)
Charging voltage: 54.6V
General information
This set includes a motor kit from Tongsheng of the type TSDZ2B 36V with 250W output power together with a softpack battery from ENERpower with 10Ah (10S2P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2B has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability) Configuration: 10S2P
Nominal voltage: 36V (37V)
Capacity: 10Ah
Energy: 360Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 1.65 kg.
Load: XLR-3
Discharge: XT-60
General information
This set includes a motor kit from Tongsheng of the type TSDZ2 36V with 250W output power together with a softpack battery from ENERpower with 15Ah (10S3P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability) Configuration: 10S3P
Nominal voltage: 36V (37V)
Capacity: 15Ah
Energy: 540Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 2.35 kg.
Load: XLR-3
Discharge: XT-60
General information
This set includes a motor kit from Tongsheng of the type TSDZ2B 36V with 250W output power together with a softpack battery from ENERpower with 20Ah (10S4P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2B has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability) Configuration: 10S4P
Nominal voltage: 36V (37V)
Capacity: 20Ah
Energy: 720Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 3.05 kg.
Load: XLR-3
Discharge: XT-60
General information
This set includes a motor kit from Tongsheng of the type TSDZ2 48V with 250W output power together with a softpack battery from ENERpower with 10Ah (13S2P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability)
Configuration: 13S2P
Nominal voltage: 48V (13S)
Capacity: 10Ah
Energy: 480Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 2.05 kg.
Load: XLR-3
Discharge: XT-60
General information
This set includes a motor kit from Tongsheng of the type TSDZ2 48V with 250W output power together with a softpack battery from ENERpower with 15Ah (13S3P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 36V or 48V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: Samsung SDI INR21700-50E / LG Chem INR21700 50MT (subject to availability)
Configuration: 13S3P
Nominal voltage: 48V (13S)
Capacity: 15Ah
Energy: 720Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 2.85 kg.
Load: XLR-3
Discharge: XT-60
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Battery ENERpower Hailong Plus 48V 17,25Ah
This Kit you can buy in 2 configuratione:
1. Free Wheel Motor (TSDZ2B)
2. Motor with coaster Break (back pedal)
General Information
This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Pro
Type: Bike-frame battery
Li-ion battery cell: Samsung INR18650-35E
Voltage (nominal): 48V
Capacity: 17.25Ah
Energy: 828Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30Afuse with XT90 power connector
General information
This set includes a motor kit from Tongsheng of the type TSDZ2 52V with 250W output power together with a softpack battery from ENERpower with 10Ah (14S2P) in a frame bag
We assemble the battery in a special format (cell holder) so that it fits into the frame bag.
If you have a back-pedal bike - choose the back-pedal motor.
A free-wheeling bike (no pedal brake) must be selected with a free-wheeling motor
Tongsheng motors are known for being easy and straightforward to assemble. The controller is already integrated in the motor and all necessary accessories such as cables, speed sensors and lighting cables are included in the kit.
This motor complies with the requirements of the StVO and does not need to be approved. The maximum speed of 25 km / h is preset. The TSDZ2 has an integrated torque sensor and regulates the amount of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: shell width 67 mm to 69 mm, inner diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most frequently installed BSA bottom brackets.
In this offer you have the option of choosing a suitable charger and display from the bundle offers for an additional Fee.
Technical documentation for all components can be found here
Technical specifications Motor
• Manufacturer: Tongsheng (China)
• Model: TSDZ2
• Engine type: mid-engine
• Wheel diameter: 16 '- 28'
• Power: 250W - 350W
• Voltage: 52V
• Torque: 50N.m - 80N.m
• Degree of support: 36% ~ 300%
• Maximum speed: 25Km / h
• Weight: 3.3 kg.
Battery highlights
• High quality production - Made in Germany
• Just-in-time assembly
• BMS with an integrated passive balancer and protection against overcharging, deep discharge, and overdischarge (temperature monitoring)
• Direct from the manufacturer
• Rechargeable - Still 80% of original capacity after 300 charge cycles
• No memory effect - charge the battery whenever you want
• Environmentally friendly according to EU directive 2002/95 / EG (RoHS)
Battery technical data:
Battery cell: LG Chem INR21700 50MT
Configuration: 14S2P
Nominal voltage: 52V (13S)
Capacity: 10Ah
Energy: 520Wh
BMS: analog BMS with 20A continuous load
Weight: approx. 2.55 kg.
Load: XLR-3
Discharge: XT-60
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Display + Battery ENERpower Hailong Pro 48V 13.8Ah.
In this offer you can choose between 2 types of Motors:
1. Freewheel
2. With coaster Break (back Pedal function)
The suitable Display and charger you can choose from our different offers on the page (Bundles)
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower Hailong battery pack. Charger and Display have to be chosen from our Bundle-offers
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal functionThe kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
We have several Displays for you to choose from. Manuals you can find here
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Pro
Type: Bike-frame battery
Li-ion battery cell: Samsung INR18650-35
Voltage (nominal): 48V
Capacity: 13.80Ah
Energy: 660Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30Afuse with XT90 power connector
Charger
In this set we offer 3 different chargers to choose from: 2A (110W) / 3A (165W) / 4.5A (250W)
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Masada 36V 15Ah with side realese
You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs.
General Information
This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display + Charger
You can choose a suitable display and charger from our bundle offers
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Masada
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR21700 M50T
Voltage (nominal): 36V (37V)
Capacity: 15Ah
Energy: approx. 540Wh
Configuration: 10S4P
Internal resistance: < 75 mOhm
Charging voltage: 42V
End-of-discharge voltage: 30V
Maximal charging: 5A
Continuous discharge current: 20A = 720 Watt
10 Min. discharge current: 25A = 900 Watt
5 Sec. discharge current: 35A = 1260 Watt
Constant load per cell: approx. 3.7A or 7A in peak load.
Weight: approx. 3.25 Kg
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W with and without coaster break + Battery ENERpower Hailong Pro 36V 16Ah (MH1)
The suitable Display and Charger you can configurate from our Bundle-offers and are add-on products (must be paid in addition)
You can choose between Motor with and without coaster break
General Information
This kit includes a Tongsheng 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers.
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and a Tool. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
You have 5 different Displays to choose from
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Powered by Samsung INR18650-35E li-ion battery cells
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Pro
Type: Bike-frame battery
Li-ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 36V (37V)
Capacity: 16Ah
Energy: 580Wh
Configuration: 10S5P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
End-of-Discharge Voltage: 30V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.75 kg.
Length: ca. 370 mm
Width: 90 mm
High: 85-90 mm
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with fuse 30A with XT90 power connector (counterpart is included in the scope of delivery)
Charger
In this set we offer 4 different chargers to choose from with 2A, 3A and 4A output
Another charger is a life-cycle Charger (41.3V 3A)
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower Hailong battery pack
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V / 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
Type: VLCD5
Type: VLCD6
Type: XH-18
SW102
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Jericho
Type: Bike-frame battery
Li-ion battery cell: Samsung INR21700-50E / LG Chem INR21700-M50T
Voltage (nominal): 48V
Capacity: 15Ah
Energy: 720Wh
Configuration: 13S3P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30Afuse with XT90 power connector
Chargers and Display have to be ordered from the bundle offers
General Information
This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower Hailong battery pack
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 48V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
Type: VLCD5
Type: VLCD6
Type: XH-18
SW102
DZ41
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Megiddo
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR21700-M50T
Voltage (nominal): 48V
Capacity: 20Ah
Energy: 960Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 4 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30Afuse with XT60 power connector
Chargers and Display have to be ordered from the bundle offers
General Information
This kit includes a Tongsheng TSWZ2 52V motor kit with 250W output power along with a ENERpower Hailong battery pack
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 52V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
Type: VLCD5
Type: VLCD6
Type: XH-18
SW102
DZ41
DZ40
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Hebron
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR21700-M50T
Voltage (nominal): 52V
Capacity: 25Ah
Energy: 1300Wh
Configuration: 14S5P
Internal resistance: < 75 mOhm
Charging voltage: 58.8V
End-of-Discharge Voltage: 42V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 5.5 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30Afuse with XT60 power connector
Chargers and Display have to be ordered from the bundle offers
General Information
This kit includes a Tongsheng TSDZ2B 52V motor kit with 250W output power along with a ENERpower Hailong battery pack
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2B has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 52V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display
Type: VLCD5
Type: VLCD6
Type: XH-18
SW102
DZ41
DZ40
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Jaffa
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR18650-MH1
Voltage (nominal): 52V
Capacity: 16Ah
Energy: 830Wh
Configuration: 14S5P
Internal resistance: < 75 mOhm
Charging voltage: 58.8V
End-of-Discharge Voltage: 42V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.95 kg.
Charge:IP67 3-Pins
Discharge: Cable with 30Afuse with XT60 power connector
Chargers and Display have to be ordered from the bundle offers
Variants from €775.00*
€790.00*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...