BUNDLE
Softpack Battery 24V 15Ah BMS 30A XLR-3 with 50S
€295.00*
Prod. no.:
12002
ENERpower soft-pack battery 24V in format 7S3P | Capacity 15Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50S
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-60 connector (male). The Smart BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 Watt - 750 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: Samsung SDI INR21700-50S
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 15 Ah
Power: approx. 375 Wh
Configuration: 7S3P
Construction: 7 x 3
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 30A = 750 wattsMaximal Charge: < 10AWeight: Approx. 1.75 kg.
Dimensions
Length: 165 mm Länge
Width: 75 mm – 95 mm
Height: 75 mm
BUNDLE
Softpack Battery 24V 25Ah BMS 20A XLR-3 with 50E (600Wh) Anderson
€325.00*
Prod. no.:
11912
ENERpower soft-pack battery 24V in format 7S5P | Capacity 25Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Compatible with 24V motors
250 Watt / 350 Watt / 450 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion cell: Samsung SDI INR21700-50E
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 25 Ah
Power: approx. 600 Wh
Configuration: 7S5P
Construction: 7 x 5
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 2.75 kg.
Dimensions
Length: around 160 mm
Width: around 115 mm – 135 mm
Height: around 74 mm