ENERpower battery case 36V in format 10S8P | 1400Wh | capacity 40Ah | for Pedelecs, eBikes, Maschines, Drones, Industry, DIY | with LG Chem INR21700-M50T. General Information . The batteries are manufactured with  INR21700-M50T Li-Ion battery cells from LG Chem is controlled by a 60A Smart BMS (Battery Management System). This battery is suitable for 36V electric motors, or devices with a total output of up to 1500 watts. A charge level indicator shows at any time in percent how full (or empty) the battery is. In this battery system we have a Weipu Bayonet IP67 connector for charging (up to 30A) and an Anderson high-current connector for discharging with an on/off switch you can easily connect the power supply without disconnecting the battery from the consumer.On / off switchThe batteries can be easily switched on and off using a switchBMS (Battery Management System)This series of batteries is manufactured with a Smart BMS with 60A continuous load (for 24V motors up to 720 watts). A Smart BMS is digitally programmed and controlled in comparison to an analog BMS. Monitoring of voltage (overcharge and deep discharge), current (overdischarge) and temperature are more accurate. The passive balancer is also easier to control.scope of applicationWe have developed this series of batteries for light electric vehicles such as electric rickshaw, electric cargo bikes, electric boats, machines in the industrial sector etc.Compatible with 36V motorsFrom 250 watts to 2000 wattsHighlights    High quality production - Made in Germany    Manufacturing just-in-time    Smart BMS with an integrated passive balancer    Direct from the manufacturer    Rechargeable - Still 80% of its original capacity after 500 charging cycles    No memory effect - charge the battery whenever you want    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications    Li-ion cell: LG Chem INR21700-M50T    Voltage (nominal): 36V (37V)    Capacity: 40Ah    Energy: approx. 1400 Wh    Configuration: 10S8P    Charging voltage: 42V    Final discharge voltage: 30V    Charging current (max.): 20A    Continuous discharge current:30A = 1000 Watts or 60A = 2000 Watts    Weight: approx.  8.85 Kg.    Dimensions: 390 x 293 x 172 mm    Charge: Weipu    Discharge connector: WEIPU, or Emphanol  For more Information use please this link

Portable rechargeable Li-ion energy device that enables mobile field work with better electronic and electrical equipment. Outdoor charging applications Off-grid power supply (generator replacement)  Remote area lighting Perfect for emergency, disaster and rescue tasks Energy Anytime Anywhere Our professional range of energy cases "Energy In Case" is manufactured in Berlin and offers a multifunctional energy supply for numerous applications. The energy cases are controlled by a strong, intelligent BMS (battery management system; 100A continuous load) and can be monitored via Wi-Fi. The system voltage of 24V (25.2V-25.9V) ensures high efficiency for consumers (devices, motors, etc.) and the high energy density compared to LiFePO4 or lead-acid batteries means that it is relatively light. We have designed our products so that all accessories such as charger, MMP regulator, voltage converter etc. can be connected externally. In this way we can guarantee the robustness of the energy case and increase the extension. Last but not least, the energy case is noiseless and clean (no exhaust gases). On vacation, the noise will only come from the neighbors' children. Modify Your Energy Case With certain minimum order quantities, we can modify our range of energy cases according to customer requirements. The implementation of step-up or step-down regulators, the stabilization of the output voltage or the use of other connectors are for modifications that we have already been able to realize for industrial customers in the past. Nummerous Applications - From Camping to Military  In addition to being used in the outdoor as a replacement for a conventional generator (lighting, supply of small devices from entertainment electronics and inverters for supplying 220V), this energy case is also intended for use by the armed forces, fire brigade, police, etc. Industrial companies also use this product to supply mobile machines, robots, printers, scanners, electric motors and much more in order to increase productivity and flexibility. You bring the energy to the place of use and not the other way around. Main features Revolutionary lightweight:- Easy to carry by hand- Extended usage time Mobile monitoring app Intelligent battery management system (BMS) Wide range of capacities System Components Internal 24V Li-ion battery Illuminated battery indicator Anti-vandal ON / OFF switch USB outputs High power socket Wi-Fi communication module for monitoring and maintenance Robust plastic case Technical Specifications Voltage | Power supply: 24VDC / 1400Wh / 54Ah Output 1: Weipu SP21 socket (charge / discharge) 25.2 VDC (20-29 VDC) / 30A continuous Output 2: Weipu SP21 socket (charge / discharge) 25.2 VDC (20-29 VDC) / 30A continuous Output 3: USB socket QC3.0 and type C PD 18W / 48W Illuminated LCD display of the capacity meter Telecommunication via WLAN Dimensions: (LxWxH) 490x385x170mm Weight: 8.85 kg Accessories Included Charger: 100-240 VAC / 29.4 VDC output Mating connector (Weipu SP21 and Amphenol ELP02A) User manual Optional Accessories Fast charger Weipu SP21 with 1.5 m open cable Amphenol ELP02A with 1.5 m open-end cable Meanwell DC / AC inverter