ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Jaffa DIY 52V (14S) from own manufacturing 16Ah (830Wh)
For motors from 250 Watts and up to 1050 Watts
This 52V battery in the Hailong Reention Jaffa case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 70 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1050 watts of power, working in 52V (14S) systems.The battery holder is very small and therefore we implement the Fuse inside the Discharge Cable
The On/Off button enable the user the turn the battery on and off as an additional feature.
Highlights
High quality assembly – Made in Germany
Assembly Just-In-Time
BMS with an integrated passive balancer
BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 500 charging cycles, still maintaines about 70% of the original capacity
No memory effect – charge your battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Details
Li-Ion-cell: LG Chem INR18650-MH1
Voltage (nominal): 52V (50.4V-51.8V)
Capacity: 16Ah
Power: 830Wh
Configuration: 14S5P
Internal resistance: < 75 mOhm
Charge Voltage: 58.8V
End-of-discharge Voltage: 42V
BMS continueous discharge current: 22A
BMS 10 Min. discharge current: 25A
BMS 5 Sec. discharge current: 30A
Safety fuse: 30A
Weight: approx. 3.95 Kg.
Charging: Zenith IP67 3-Pins
Discharging: Cable with fuse 30A with XT-60
ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Jaffa DIY 52V (14S) from own manufacturing 17.2Ah (890Wh)
For motors from 250 Watts and up to 1050 Watts
This 52V battery in the Hailong Reention Jaffa case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 70 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1050 watts of power, working in 52V (14S) systems.The battery holder is very small and therefore we implement the Fuse inside the Discharge Cable
The On/Off button enable the user the turn the battery on and off as an additional feature.
Highlights
High quality assembly – Made in Germany
Assembly Just-In-Time
BMS with an integrated passive balancer
BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 500 charging cycles, still maintaines about 70% of the original capacity
No memory effect – charge your battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Details
Li-Ion-cell: LG Chem INR18650-MJ1
Voltage (nominal): 52V (50.4V-51.8V)
Capacity: 17.2Ah
Power: 890Wh
Configuration: 14S5P
Internal resistance: < 75 mOhm
Charge Voltage: 58.8V
End-of-discharge Voltage: 42V
BMS continueous discharge current: 22A
BMS 10 Min. discharge current: 25A
BMS 5 Sec. discharge current: 30A
Safety fuse: 30A
Weight: approx. 3.95 Kg.
Charging: Zenith IP67 3-Pins
Discharging: Cable with fuse 30A with XT-60
48V controller in Bracket 4-pins 14A for Polly Case UDX, UniMoke
This is a replacement controller, integrated in the holder, for Urban Drive Style electric Bikes that have a Polly Case DP-4C (48V 15Ah) or Polly Case 5C (48V 20Ah) batterybattery
Manufacturer: MXUS
Output: 48V 14A
48V controller in Bracket 5-pins 14A for Hailong Pro, Hailong Plus UDX, UniMoke
This is a replacement controller, integrated in the holder, for Urban Drive Style electric Bikes that have a Hailong Pro (48V 13.80Ah) or Hailong Plus (48V 16Ah or 17.50Ah) batterybattery
Manufacturer: MXUS
Output: 48V 14A
High quality charger from Atnen for 48V Li-ion batteries (13S) 165W, 3A output current
With the right charger you can expand the lifespan of your batteries. Cheep charger charge batteries not with CC/CV and usually also not up to 4.2V or 54.6V. This way the batteries are never fully charged and in the long run it shorten the lifespan of the battery by 30%. Saving on a charger will eventually cost you more!
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 3A – quick and strong
COnnectoer:XLR-3
Input: 100 – 240V AC
Manufacturer: Atnen
Model: LBC015480301
CC/CV with End-of-Charge voltage of 54.8V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V – 48.1V)
GS – certified safety standards according to § 21 ProdSG
Efficiency: ca. 85%
Power: 165W
Safety
Over-current protection: < 3.4A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
A variety of li-ion batteries of 48V, type 13S (nominal voltage of 46.8V – 48.1V)
High quality charger from Atnen for 48V Li-ion batteries (13S) 245W, 4.5A output current with no fan
With the right charger you can expand the lifespan of your batteries. Cheep charger charge batteries not with CC/CV and usually also not up to 4.2V or 54.6V. This way the batteries are never fully charged and in the long run it shorten the lifespan of the battery by 30%. Saving on a charger will eventually cost you more!
Highlights / Technical Details
Cable length: approx. 100 cm
Output: 4.5A – quick and powerful
Connector: XLR-3
Input: 100 – 240V AC
Manufacturer: Atnen
Model: LBC034546045
CC/CV with End-of-Charge voltage of 54.6V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V - 48.1V)
Efficiency: approx. 90%
Power: approx. 245W
No Fan
Plastic case
Safety
Over-current protection: <5.5A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
Atnen Charger 54.6V 4.5A no fan (245W) with XLR-3 for Silverfish 48V 14.25Ah / 20.40Ah
High quality charger from Atnen for 48V Li-ion batteries (13S) 245W, 4.5A output current with no fan
With the right charger you can expand the lifespan of your batteries. Cheep charger charge batteries not with CC/CV and usually also not up to 4.2V or 54.6V. This way the batteries are never fully charged and in the long run it shorten the lifespan of the battery by 30%. Saving on a charger will eventually cost you more!
Highlights / Technical Details
Cable length: approx. 100 cm
Output: 4.5A – quick and powerful
Connector: Zenith 3- Pins IP67
Input: 100 – 240V AC
Manufacturer: Atnen
Model: LBC034546045
CC/CV with End-of-Charge voltage of 54.6V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V - 48.1V)
Efficiency: approx. 90%
Power: approx. 245W
No Fan
Plastic case
Safety
Over-current protection: <5.5A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
Atnen Charger 54.6V 4.5A no fan (245W) with XLR-3 for Silverfish 48V 14.25Ah / 20.40Ah
Important general informationThis 36V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge) in this Case. The back light is operated via its own On/Off button.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-29E Voltage (nominal): 36V (37V) Capacity: 17.10Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 17.10Ah with INR18650-29E1 x luggage rack FME0006
Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 60 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 19.80Ah1 x luggage rack FME0006
Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 60 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 19.20Ah1 x luggage rack FME0006
Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 60 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 19.20Ah1 x luggage rack FME0006
Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Cehm INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 19.20Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 / XT-60 or Anderson PowerPole high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 17.25Ah with INR18650-35E1 x luggage rack FME0006
Important general informationThis 36V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge) in this Case. The back light is operated via its own On/Off button.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-35E Li-Ion cells Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-35E Voltage (nominal): 36V (37V) Capacity: 20.30Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 20.30Ah with INR18650-35E1 x luggage rack FME0006
Important general informationThis 36V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 60 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG INR18650-MJ1, or INR18650-35E Voltage (nominal): 36V (37V) Capacity: 20.30Ah Configuration: 10S6P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 36V 19.80Ah1 x luggage rack FME0006
Important general informationThis 48V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge) in this Case. The back light is operated via its own On/Off button.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-29E Voltage (nominal): 48V (13S) Capacity: 11.60Ah Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 11.60Ah with INR18650-29E1 x luggage rack FME0006
Important general informationThis 48V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-29E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-29E Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 11.6Ah Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.85 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 11.6Ah with INR18650-29E1 x luggage rack FME0006
Important general informationThis 48V battery in the Gath luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 950 watts of power that work in 48V (13S) systems.An on / off switch is also located on the battery and there is a charge indicator (Fuel Gauge) in this Case. The back light is operated via its own On/Off button.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-35E Voltage (nominal): 48V (13S) Capacity: 13.80Ah Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.3.35 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 13.80Ah with INR18650-35E1 x luggage rack FME0006
Important general informationThis 48V battery in the Nablus luggage rack housing that we assemble in Berlin, Germany,comes with a rack for the luggage rack. The batteries are assembled in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90 connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.An on / off switch is also located on the battery and there is no charge indicator (Fuel Gauge) in this Case.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Samsung SDI INR18650-35E Li-Ion cells -> up to 8A continuous load per parallel connection Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-35E Voltage (nominal): 48V (46.8V - 48.1V) Capacity: 13.8Ah Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.85 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT90 high current connector (counterpart is included)dimensions:Length: approx. 438 mmWidth: approx. 156 mmHeight: 67 mmScope of delivery:1 x battery Enerpower Nablus 48V 13.8Ah with INR18650-35E1 x luggage rack FME0006
ENERpower frame battery Li-Ion Hailong Akkon DP-5C DIY 36V (37V) from our own assembly line with 16Ah (580Wh) For motors from 250 watts to 750 wattsImportant general informationThis 36V battery in the Hailong Akkon DP-5C housing, which we assemble, can be mounted on the frame or on the luggage rack. The batteries are assembled in Berlin in plastic cell holders. Charging is possible with a DC round plug (5.5 mm / 2.5 mm), discharging is carried out via the holder (separable from the battery) with XT90, XT60, or Anderson connector. Up to 52 18650 battery cells can be accommodated in this case.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (37V) systems.This battery has a charge level indicator and an on / off switch
Highlights High quality assembly - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 500 charging cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Fuse: 30A Weight: approx.2.75 kg. Charging: DC round plug 5.5 mm / 2.5 mm Discharge: XT-60, XT-90, Anderson PowerPoleDimensions (with bracket)Length: approx. 368 mmWidth: 90 mmHeight: 96 mm
ENERpower soft pack battery 36V | Format 10S4P | Energy 580Wh / 720 Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700 M50T, Molicel P42AImportant general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700 M50T Voltage (nominal): 36V Capacity: 20Ah Energy: 720Wh Configuration: 10S4P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: Zenith 3-Pins Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 368 mm Width: 95 mm Height: 103 mm
ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a Round Plug DCunloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 40 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 1000 watts of power that work in 48V (13S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 15Ah Energy: 720Wh Configuration: 13S3P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 368 mm Width: 95 mm Height: 103 mm
ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis battery was used for the new model UDX and in some of the UNIMOKE bikes. The bracket, as seen in the picture, has 4 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 15Ah Energy: 720Wh Configuration: 13S3P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 368 mm Width: 95 mm Height: 103 mm
ENERpower Megiddo battery 36V for the Frame | Format 10S5P | Energy 900Wh | Capacity 25 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-50E.Important general informationThis 36V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 36V Capacity: 25Ah Energy: 900Wh Configuration: 10S5P Internal resistance: <75 mOhm Charging voltage: 42V Final discharge voltage: 30V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.20 kg (without bracket) Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm
ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy 960Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with Samsung INR21700-50E.Important general informationThis 48V battery in the Hailong Jericho housing, which we manufacture, can be mounted on the frame or on the luggage rack. The batteries are manufactured in plastic cell holders. Charging the battery is possible with a DC round plug (5.5 mm / 2.5 mm),unloading takes place via the holder (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This housing (case) can accommodate up to 52 21700 battery cells.With a BMS that can withstand between 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power that work in 36V (10S) systems.The battery holder is reinforced with metal plates and in addition to a charge level indicator, this housing also has an on / off switchSo you can not only choose the connector yourself, but also the right charger. The difference in the chargers lies in the different output currents (charging speed).Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 48V Capacity: 16Ah - 20Ah Energy: 770Wh - 960Wh Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.30 kg (without bracket) Charging: 3-Pins IP67 Zenit Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm