48V controller in Bracket 4-pins 14A for Polly Case UDX, UniMoke
€49.99*
Prod. no.:
11873
48V controller in Bracket 4-pins 14A for Polly Case UDX, UniMoke
This is a replacement controller, integrated in the holder, for Urban Drive Style electric Bikes that have a Polly Case DP-4C (48V 15Ah) or Polly Case 5C (48V 20Ah) batterybattery
Manufacturer: MXUS
Output: 48V 14A
48V controller in Bracket 5-pins 14A for Hailong Pro, Hailong Plus UDX, UniMoke
€49.99*
Prod. no.:
11796
48V controller in Bracket 5-pins 14A for Hailong Pro, Hailong Plus UDX, UniMoke
This is a replacement controller, integrated in the holder, for Urban Drive Style electric Bikes that have a Hailong Pro (48V 13.80Ah) or Hailong Plus (48V 16Ah or 17.50Ah) batterybattery
Manufacturer: MXUS
Output: 48V 14A
Atnen Charger 54.6V 3A XLR-3
€39.99*
Prod. no.:
11398
High quality charger from Atnen for 48V Li-ion batteries (13S) 165W, 3A output current
With the right charger you can expand the lifespan of your batteries. Cheep charger charge batteries not with CC/CV and usually also not up to 4.2V or 54.6V. This way the batteries are never fully charged and in the long run it shorten the lifespan of the battery by 30%. Saving on a charger will eventually cost you more!
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 3A – quick and strong
COnnectoer:XLR-3
Input: 100 – 240V AC
Manufacturer: Atnen
Model: LBC015480301
CC/CV with End-of-Charge voltage of 54.8V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V – 48.1V)
GS – certified safety standards according to § 21 ProdSG
Efficiency: ca. 85%
Power: 165W
Safety
Over-current protection: < 3.4A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
A variety of li-ion batteries of 48V, type 13S (nominal voltage of 46.8V – 48.1V)
Atnen Charger 54.6V 4.5A no fan (245W) with XLR-3 for Silverfish 48V XLR-3
€69.99*
Prod. no.:
11396
High quality charger from Atnen for 48V Li-ion batteries (13S) 245W, 4.5A output current with no fan
With the right charger you can expand the lifespan of your batteries. Cheep charger charge batteries not with CC/CV and usually also not up to 4.2V or 54.6V. This way the batteries are never fully charged and in the long run it shorten the lifespan of the battery by 30%. Saving on a charger will eventually cost you more!
Highlights / Technical Details
Cable length: approx. 100 cm
Output: 4.5A – quick and powerful
Connector: XLR-3
Input: 100 – 240V AC
Manufacturer: Atnen
Model: LBC034546045
CC/CV with End-of-Charge voltage of 54.6V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V - 48.1V)
Efficiency: approx. 90%
Power: approx. 245W
No Fan
Plastic case
Safety
Over-current protection: <5.5A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
Atnen Charger 54.6V 4.5A no fan (245W) with XLR-3 for Silverfish 48V 14.25Ah / 20.40Ah
Atnen Charger 54.6V 4.5A no fan (245W) with XLR-3 for UDX battery Polly with Zenith 3-Pins
€69.99*
Prod. no.:
11397
High quality charger from Atnen for 48V Li-ion batteries (13S) 245W, 4.5A output current with no fan
With the right charger you can expand the lifespan of your batteries. Cheep charger charge batteries not with CC/CV and usually also not up to 4.2V or 54.6V. This way the batteries are never fully charged and in the long run it shorten the lifespan of the battery by 30%. Saving on a charger will eventually cost you more!
Highlights / Technical Details
Cable length: approx. 100 cm
Output: 4.5A – quick and powerful
Connector: Zenith 3- Pins IP67
Input: 100 – 240V AC
Manufacturer: Atnen
Model: LBC034546045
CC/CV with End-of-Charge voltage of 54.6V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V - 48.1V)
Efficiency: approx. 90%
Power: approx. 245W
No Fan
Plastic case
Safety
Over-current protection: <5.5A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
Atnen Charger 54.6V 4.5A no fan (245W) with XLR-3 for Silverfish 48V 14.25Ah / 20.40Ah
Enerpower Jericho Frame 48V 15Ah (720Wh) BMS 20A - with No Bracket
€365.00*
Prod. no.:
11665
ENERpower soft pack battery 48V | Format 13S3P | Energy 720 Wh | Capacity 15 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50TImportant general informationThis battery was used for the new model UDX and in some of the UNIMOKE bikes. The bracket, as seen in the picture, has 4 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 15Ah Energy: 720Wh Configuration: 13S3P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.3.50 kg (without bracket) Charging: DC Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)
dimensions Length: 368 mm Width: 95 mm Height: 103 mm
Tip
BUNDLE
Enerpower Megiddo Frame 48V 20Ah BMS 20A 960Wh - with No Bracket
€465.00*
Prod. no.:
11567
ENERpower Megiddo battery 48V for the Frame | Format 13S4P | Energy 960Wh | Capacity 20 Ah | for pedelecs, eBikes DIY | with LG Chem INR21700-M50T.Important general information.This battery was used for the new model UDX and in some of the UNIMOKE bikes. The bracket, as seen in the picture, has 4 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.
Highlights High quality production - Made in Germany Manufacturing just-in-time BMS with an integrated passive balancer BMS with protection against overcharge, deep discharge, overdischarge (temperature monitoring) Direct from the manufacturer Rechargeable - Still 80% of its original capacity after 300 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS)Technical specifications Li-ion cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 20Ah Energy: 960Wh Configuration: 13S4P Internal resistance: <75 mOhm Charging voltage: 54.6V Final discharge voltage: 39V BMS continuous discharge current: 22A BMS 10 min. Discharge current: 25A BMS 5 seconds discharge current: 30A Safety Fuse: 30A Weight: approx.4.30 kg (without bracket) Charging: DC round plug 5.5 mm / 2.5 mm Discharge: Cable with fuse 30A with XT60, XT90 or Anderson high current connector)dimensions Length: 368 mm Width: 95 mm Height: 122 mm
Enerpower Silverfish Battery 36V 14.25Ah with no Bracket (410 x 115 x 75 mm)
€439.99*
Prod. no.:
11415
Description
Enerpower Silverfish 36V 14.25Ah (515Wh) battery without a holder, which is designed for use with the UNI MK and UNI Swing models 36V. The battery is manufactured in Germany and is made to order with a just-in-time manufacturing process. It comes with a built-in battery management system (BMS) that includes a passive balancer and protects against overcharging, deep discharge, and over-discharge. The BMS also monitors temperature.
The battery is rechargeable and can retain 80% of its original capacity after 300 charging cycles. It has no memory effect, meaning it can be charged at any time without affecting its performance. It is also environmentally friendly, in accordance with EU directive 2002/95/EG (RoHS).
Technical certification:
Battery cells: Samsung SDI INR18650-29E lithium-ion cells,
nominal voltage of 36V
capacity of 14.25Ah
energy of 515Wh.
Configuration: 10S5P
internal resistance: less than 75 mOhm.
The battery can be charged using an XLR-3-Pin connector and discharged using the plus and minus contacts on the battery's contact plate.
The battery has a weight of approximately 4.55 kg
Dimensions of 410 x 110 x 75 mm.
BMS: can handle a continuous discharge current of up to 22A, a 10-minute discharge current of up to 25A, and a 5-second discharge current of up to 30A.
The battery also has a 30A fuse for added safety.
8.57
%
BUNDLE
Enerpower Silverfish Battery 48V 14.25Ah with no Bracket (410 x 115 x 75 mm) Second choice
€319.99*
€349.99*
Prod. no.:
11400
Enerpower Silverfish Battery 48V 14.25Ah with no Bracket (410 x 115 x 75 mm) - Second Choice
The battery is new, but has some small damages on the case (like Scratches)
Description
Enerpower Silverfish 36V 14,25Ah (515Wh) battery without a holder, which is designed for use with the UNI MK and UNI Swing models with 36V. The battery is manufactured in Germany and is made to order with a just-in-time manufacturing process. It comes with a built-in battery management system (BMS) that includes a passive balancer and protects against overcharging, deep discharge, and over-discharge. The BMS also monitors temperature.
The battery is rechargeable and can retain 80% of its original capacity after 300 charging cycles. It has no memory effect, meaning it can be charged at any time without affecting its performance. It is also environmentally friendly, in accordance with EU directive 2002/95/EG (RoHS).
Technical certification:
Battery cells: Samsung SDI INR18650-29E lithium-ion cells,
nominal voltage of 36V
capacity of 14.25Ah
energy of 515Wh.
Configuration: 10S5P
internal resistance: less than 75 mOhm.
The battery can be charged using an XLR-3-Pin connector and discharged using the plus and minus contacts on the battery's contact plate.
The battery has a weight of approximately 3.45 kg
Dimensions of 410 x 110 x 75 mm.
BMS: can handle a continuous discharge current of up to 22A, a 10-minute discharge current of up to 25A, and a 5-second discharge current of up to 30A.
The battery also has a 30A fuse for added safety.
BUNDLE
Enerpower Silverfish Battery 48V 20.40Ah with no Bracket (410 x 115 x 75 mm)
From
€510.00*
Prod. no.:
11389
Description
Enerpower Silverfish 48V 20,40Ah (980Wh) battery without a holder, which is designed for use with the UNI MK and UNI Swing models. The battery is manufactured in Germany and is made to order with a just-in-time manufacturing process. It comes with a built-in battery management system (BMS) that includes a passive balancer and protects against overcharging, deep discharge, and over-discharge. The BMS also monitors temperature.
The battery is rechargeable and can retain 80% of its original capacity after 300 charging cycles. It has no memory effect, meaning it can be charged at any time without affecting its performance. It is also environmentally friendly, in accordance with EU directive 2002/95/EG (RoHS).
Technical certification:
Battery cells: LG Chem INR18650-MJ1 lithium-ion cells,
nominal voltage of 48V
capacity of 20.40Ah
energy of 980Wh.
Configuration: 13S6P
internal resistance: less than 75 mOhm.
The battery can be charged using an XLR-3-Pin connector and discharged using the plus and minus contacts on the battery's contact plate.
The battery has a weight of approximately 4.55 kg
Dimensions of 410 x 110 x 75 mm.
BMS: can handle a continuous discharge current of up to 22A, a 10-minute discharge current of up to 25A, and a 5-second discharge current of up to 30A.
The battery also has a 30A fuse for added safety.
BUNDLE
Hailong PLUS Frame Battery Li-Ion 48V 16Ah (765Wh) - with No Bracket
€415.00*
Prod. no.:
11385
ENERpower Frame Battery Li-Ion Hailong PLUS DIY 48V from own manufacturing 16Ah (765Wh) with LG Chem INR18650-MH1
Important General Information
This battery was used for the older model UDX. The bracket, as seen in the picture, has 5 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical data
Li-Ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 48V
Capacity: 16Ah
Power: 765Wh
Configuration: 13S5P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 3.65 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
Tip
HaiLong PRO Battery Li-ion 48V 13.8Ah 35E (660Wh) - LB
€390.00*
Prod. no.:
11666
ENERpower Bike-Frame Battery Li-ion Hailong PRO DIY 48V from own production 13.8Ah (660WH) with Samsung SDI INR18650-35E
Important General Information
This battery was used for the older model UDX. The bracket, as seen in the picture, has 5 pins. The assignment of plus and minus on the contacts is identical to this model and the battery can replace the old one without any adjustments.
Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with an integrated passive balancer
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
Samsung SDI INR18650-35E Li-Ion cells–>up to 8A continuous load per parallel circuit
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Technical Data
Li-ion Cell: Samsung SDI INR18650-35E
Voltage (nominal): 48V
Capacity: 13.80Ah
Energy: 660Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charging voltage: 54.6V
End-of-Discharge Voltage: 39V
BMS Continuous Discharge Current: 22A
BMS 10 Min. Discharge Current: 25A
BMS 5 Seconds Discharge Current: 30A
Safety Fuse: 30A
Weight: approx. 2.95 kg.
Charge: DC round plug 5.5 mm/2.5 mm
Discharge: Cable with 30A fuse with XT90 power connector
Scope of Delivery
1 x battery Hailong PRO 48V 13.8Ah
1 x holder with XT90 discharge cable
Rubber plates
2 x keys
Optional (surcharge): 1 x battery charger 2A or 3A or 5A
UDX Charger 54.6V 3A with Zenith 3-Pins for Polly batteries 48V
€42.99*
Prod. no.:
11399
High quality charger from Atnen for 48V Li-ion batteries (13S) 165W, 3A output current
With the right charger you can expand the lifespan of your batteries. Cheep charger charge batteries not with CC/CV and usually also not up to 4.2V or 54.6V. This way the batteries are never fully charged and in the long run it shorten the lifespan of the battery by 30%. Saving on a charger will eventually cost you more!
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 3A – quick and strong
COnnectoer:Zenith 3-Pins IP67
Input: 100 – 240V AC
Manufacturer: Atnen
Model: LBC015480301
CC/CV with End-of-Charge voltage of 54.8V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V – 48.1V)
GS – certified safety standards according to § 21 ProdSG
Efficiency: ca. 85%
Power: 165W
Safety
Over-current protection: < 3.4A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
UDX Batteries Polly with 3-Pins Charging socket 48V