ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 36V (12S)
Capacity: 20Ah
Configuration: 12S5P
Energy: about 720Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 43.2V
End-of-discharge voltage: 24V
Weight: approx. 5.4 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 330 x 160 x 70 mm
ENERpower battery LiFePO4 36V (12S) for the operation of 36V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 12S (36V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 720 wattsThe protection against overcharging (43,2V) and against deep discharge (24V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 36V (12S 38.4V)
Capacity: 24Ah
Configuration: 12S6P
Energy: about 920Wh
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 43.2V
End-of-discharge voltage: 24V
Weight: approx. 6.5 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 330 x 170 x 70 mm
ENERpower Softpack battery 36V, format 10S2P, square) | 360 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | LG Chem M50.
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 36V motors
250 watts / 500 watts / 540 watts / 700 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
With battery cells INR21700-M50 from LG Chem
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: INR21700-M50 from LG Chem
Voltage (nominal): 36V (37V)
Capacity: 10 Ah
Power: approx. 360 Wh
Configuration: 10S2P (set up: 5x4)
Internal resistance: < 75 mOhm
Charge voltage: 42V
End-of-discharge voltage: 30V
Continuous discharge Current: 15A = 720 watts
10 minutes discharge Current: 20A = 900 watts
5 seconds discharge current: 25A = 1080 watts
Weight: 1.6 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 110 mm
Width: 88 mm – 100 mm
Height: 72 mm
ENERpower Softpack battery 36V in format 10S3P RECTANGULAR | 435Wh | capacity 12 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-40T
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
A smart BMS is digitally controlled and therefore more accurate. The BMS reads more powerfully and also supports recuperation.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 36V motors
250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt / 1440 Watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-40T
Voltage (nominal): 36V (37V)
Capacity: 12 Ah
Power: approx. 435 Wh
Configuration: 10S3P (set up: 10x3 - rectangular)
Internal resistance: < 75 mOhm
Charge voltage: 42V
End-of-discharge voltage: 30V
Charge Max.: 8A
Continuous discharge Current: 30A = 1080 Watt or 40A = 1440 watts
5 seconds discharge current: 50A = 1800 watts
Weight: approx. 2.5 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 230 mm
Width: 70mm – 90 mm
Height: 74 mm
ENERpower Softpack battery 36V, format 10S4P RECTANGULAR | 720 Wh | capacity 20 Ah | for Pedelecs, eBikes DIY | Samsung SDI INR21700-50E.
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 36V motors
250 watts / 500 watts / 540 watts / 750 watts / 1080 watts
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 36V (37V)
Capacity: 20 Ah
Power: approx. 720 Wh
Configuration: 10S4P (set up: 10×4 - rectangular)
Internal resistance: < 75 mOhm
Charge voltage: 42V
End-of-discharge voltage: 30V
Maximal charge current: 8A
Continuous discharge Current: 30A = 1080 watts
5 seconds discharge current: 50A = 1800 watts
Weight: 3.1 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
Length: 220 mm
Width: 94 mm – 1110 mm
Height: 71 mm
ENERpower softpack battery 36V 20Ah for eBikes, with INR21700-M50T battery cells from LG Chem INR21700-M50T in Enerprof frame bag
Important General Information
This 36V e-bike battery in softpack is manufactured for insertion in carrier bag . With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly.
The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure.
This battery is also suitable for engines with up to 750 watts of power.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
Battery – Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with integrated passive balancer (4.1V pro rechargeable cell)
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Battery – Technical Data
Li-ion Cell: LG Chem INR21700-M50T
Voltage (nominal): 36V (37V)
Capacity: 20Ah
Power: about 720Wh
Configuration: 10S2P - 10S5P
Internal resistance: < 75 mOhm
Charge Voltage: 42V
Maximum Charging current: 5A
End-of-Discharge Voltage: 30V
Continuous Discharge Current: 20A = 720 watts
10 seconds 30A: approx. 1080 watts
Weight: approx. 2.7Kg. (Battery only)
The Enerpower frame bag is a collaboration between Enerdan and Roswheel in order to better design the Attack frame bag for use with eBike batteries. The new frame bag is: • Waterproof • Has 5 x Velcro fasteners can be attached at any point • Can be opened in 240 degrees • Suitable as a frame bag for batteries up to 5 kg. • Is approx. 350 mm long, approx. 130 mm high and 90 mm wide • Fits batteries made with 21700 format battery cells. • Has a larger opening for charging and discharging cables
Compatibility
Compatible with engines 250 watts / 500 watts / 750 watts