Filter
–
BUNDLE
Softpack Battery 43.2V 10Ah BMS 20A XLR-3 - rectangular (430Wh)
€210.00*
Prod. no.:
115272
ENERpower Softpack battery 43.2V in format 12S2P | 430 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | with Samsung SDI.
Important General Information
The 43.2V 12S batteries in softpack, which we manufacture in Berlin are built in rectangular structure. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90, XT60, or Anderson PowerPole connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the rectangular version, 12 cells are used on the longest side (265 mm). We assemble this type of battery in the formats 12S2P (construction 12×2), 12S3P (12×3), 12S4P (12×4), 12S5P (12×5) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 43.2V motors 12S
From 250 Watts and up to 800 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung INR21700-50E
Voltage (nominal): 43.2V
Capacity: 10 Ah
Power: approx. 430 Wh
Configuration: 12S2P (set up: 12×4)
Internal resistance: < 75 mOhm
Charge voltage: 50.4V
End-of-discharge voltage: 36V
Continuous discharge Current: 20A = 850 watts
5 seconds discharge current: 30A = ca. 1250 watts
Weight: 2.0 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
Length: 265 mm
Width: 60 mm – 70 mm
Height: 74 mm
BUNDLE
Softpack Battery 43.2V 15Ah BMS 20A XLR-3 - rectangular (650Wh)
€305.00*
Prod. no.:
115280
ENERpower Softpack battery 43.2V in format 12S3P | 650Wh | capacity 15 Ah | for Pedelecs, eBikes DIY | with Samsung SDI.
Important General Information
The 43.2V 12S batteries in softpack, which we manufacture in Berlin are built in rectangular structure. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90, XT60, or Anderson PowerPole connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the rectangular version, 12 cells are used on the longest side (265 mm). We assemble this type of battery in the formats 12S2P (construction 12×2), 12S3P (12×3), 12S4P (12×4), 12S5P (12×5) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 43.2V motors 12S
From 250 Watts and up to 800 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung INR21700-50E
Voltage (nominal): 43.2V
Capacity: 15 Ah
Power: approx. 650 Wh
Configuration: 12S3P (set up: 12×4)
Internal resistance: < 75 mOhm
Charge voltage: 50.4V
End-of-discharge voltage: 36V
Continuous discharge Current: 20A = 850 watts
5 seconds discharge current: 30A = ca. 1250 watts
Weight: 2.75 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
Length: 265 mm
Width: 70 mm – 80 mm
Height: 74 mm