General Information
This kit includes a Tongsheng TSDZ2B 52V motor kit with 250W output power along with a ENERpower Hailong battery pack
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2B has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.
The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
- Manufacturer:Tongsheng (China)
- Model: TSDZ2B
- Motor tyep: mid-motor
- Wheel diameter: 16' - 28'
- Energy: 250W - 350W
- Voltage: 52V
- Torque: 50N.m - 80N.m
- Level of support: 36% ~ 300%
- Maximal speed: 25Km/h
- Weight: 3.3 Kg.
Display
- Type: VLCD5
- Type: VLCD6
- Type: XH-18
- SW102
- DZ41
- DZ40
Battery - Highlights
- High quality assembling – Made in Germany
- Assembling Just-In-Time
- BMS with an integrated balancer
- BMS with protection against overcharge, deep discharge, over discharge (temperature control)
- Direct from the manufacturer
- Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
- No memory-effect – charge the battery whenever you want
- Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
- Manufacturer: ENERpower (Germany)
- Case: Hailong Jaffa
- Type: Bike-frame battery
- Li-ion battery cell: LG Chem INR18650-MH1
- Voltage (nominal): 52V
- Capacity: 16Ah
- Energy: 830Wh
- Configuration: 14S5P
- Internal resistance: < 75 mOhm
- Charging voltage: 58.8V
- End-of-Discharge Voltage: 42V
- BMS Continuous Discharge Current: 22A
- BMS 10 Min. Discharge Current: 25A
- BMS 5 Seconds Discharge Current: 30A
- Safety Fuse: 30A
- Weight: approx. 3.95 kg.
- Charge:IP67 3-Pins
- Discharge: Cable with 30Afuse with XT60 power connector
Chargers and Display have to be ordered from the bundle offers
| Akkuspannung: | 52V |
|---|---|
| Gehäuse (Hailong): | Hailong Reention Jaffa |
Mit Markenzellen, eigener Fertigungstechnologie, hohen Sicherheitsstandards und deutscher Qualität rechtfertigt die Marke Enerpower den hervorragenden Ruf ihrer Produkte. Ob es sich um Akkus oder Ladegeräte handelt, verspricht Euch die Marke Enerpower Qualität, Leistung, Sicherheit & Langlebigkeit.
Login