EP-1000Wh: Battery case Power Station 24V 55Ah BMS 40A (390 x 285 x 120 mm)

ENERpower battery case 24V in format 7S12P | 1000Wh | capacity 40Ah | for Pedelecs, eBikes, Maschines, Drones, Industry, DIY | with Panasonic NCR2070C

General Information

.

The battery in Case is assembled with NCR2070C Li-Ion battery cells from Panasonic is controlled by a 40A Smart BMS (Battery Management System).

This battery is suitable for 24V electric motors, or devices with a total output of up to 750 watts consumption

A charge level indicator shows at any time in percent how full (or empty) the battery is.

In this battery system we have a Weipu Bayonet IP67 connector for charging (up to 30A) and an Anderson high-current connector for discharging with an on/off switch you can easily connect the power supply without disconnecting the battery from the consumer.


On / off switch

The batteries can be easily switched on and off using a switch

BMS (Battery Management System)

This series of batteries is manufactured with a Smart BMS with 40A continuous load (for 24V motors up to 750 watts). A Smart BMS is digitally programmed and controlled in comparison to an analog BMS. Monitoring of voltage (overcharge and deep discharge), current (overdischarge) and temperature are more accurate. The passive balancer is also easier to control.

scope of application

We have developed this series of batteries for light electric vehicles such as electric rickshaw, electric cargo bikes, electric boats, machines in the industrial sector etc.

Compatible with 24V motors

Up to 750 Watts

Highlights

    High quality production - Made in Germany
    Manufacturing just-in-time
    Smart BMS with an integrated passive balancer
    Direct from the manufacturer
    Rechargeable - Still 80% of its original capacity after 500 charging cycles
    No memory effect - charge the battery whenever you want
    Environmentally friendly according to EU directive 2002/95 / EG (RoHS)

Technical specifications

    Li-ion cell: Panasonic NCR2070C
    Voltage (nominal): 24V (25.2V - 25.9V)
    Capacity: 40Ah
    Energy: approx. 1000 Wh
    Configuration: 7S12P
    Charging voltage: 29.4V
    Final discharge voltage: 21V
    Charging current (max.): 20A
    Continuous discharge current:30A = 750 Watts
    Weight: approx.  6.55 Kg.
    Dimensions: 390 x 285 x 120 mm
    Charge: Weipu
    Discharge connector: WEIPU

 For more Information use please this link