ENERpower battery LiFePO4 48V (15S) for the operation of 48V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 15S (48V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 30A - for devices with a consumption of up to 1440 wattsThe protection against overcharging (55V) and against deep discharge (30V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 48V (15S)
Capacity: 20Ah
Configuration: 15S5P
Energy: about 960Wh
Discharge Current: 30A
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 54V
End-of-discharge voltage: 30V
Weight: approx. 6 kg.
Charging: XLR-3
Discharge: XT-90
Dimensions:
ca. 420 x 130 x 70 mm
ENERpower softpack battery 48V (set-up 13S4P) 12.8Ah for eBikes, with MH1 battery cells from LG Chem in Enerpower Frame bag
Important General Information
This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly.
The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure.
This battery is also suitable for engines with up to 950 watts of power.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg.
Compatible with engines
250 watts / 500 watts / 750 watts / 950 watts
Battery – Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with integrated passive balancer (4.1V pro rechargeable cell)
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Battery – Technical Data
Li-ion Cell: LG Chem INR18650-MH1
Voltage (nominal): 48V (46.8V 48.1V)
Capacity: 12.8 Ah
Power: About 615Wh
Configuration: 13S4P
Internal resistance: < 75 mOhm
Charge Voltage: 54.6V
Maximum Charging current: 5A
End-of-Discharge Voltage: 39V
Continuous Discharge Current: 20A = 950 watts
10 seconds 30A: approx. 1440 watts
Weight: Approx. 2.85 kg. (Battery only)
Enerpower Bike-Frame Bag
Waterproof
With 6 x Velcro-fastener can be attached to any part of the bike-frame
Suitable as frame bag for batteries up to 5 kg.
ENERpower softpack battery 48V (set-up 13S3P) 12Ah for eBikes, with INR21700-40T battery cells from Molicel in Enerpower Attack bag
Important General Information
This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly.
The battery cells are assembled in a plastic holder and equipped with a ENERpower branded Smart BMS 30A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure.
This battery is also suitable for engines with up to 1440 watts of power.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg.
Compatible with engines
Up to 1440 Watts (Smart BMS 30A)
Up to 1920 Watts (Smart BMS 40A)
Battery – Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
Smart BMS with integrated passive balancer (4.1V pro rechargeable cell)
Smart BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Battery – Technical Data
Li-ion Cell: INR21700-40T
Voltage (nominal): 48V (46.8V 48.1V)
Capacity: 12 Ah
Power: About 570Wh
Configuration: 13S3P
Internal resistance: < 75 mOhm
Charge Voltage: 54.6V
Maximum Charging current: 8A
End-of-Discharge Voltage: 39V
Continuous Discharge Current:
30A = 1440 watts
40A = 1920 watts
Weight: Approx. 2.85 kg. (Battery only)
Enerpower Attack Bike-Frame Bag
Waterproof
With 6 x Velcro-fastener can be attached to any part of the bike-frame
Suitable as frame bag for batteries up to 5 kg.
ENERpower softpack battery 48V (set-up 13S3P) 15Ah for eBikes, with M50 battery cells from LG Chem (21700) in or without carry bag
Important General Information
This 48V e-bike battery in softpack is manufactured for insertion in Roswheel carrier bag (Attack). With this bike-frame bag, you can attach the battery to the frame of the eBike and ideally connect it to a mid-sized engine. The frame bag is waterproof and with the separation between charging and discharging cables you don’t have to overplug constantly.
The battery cells are assembled in a plastic holder and equipped with a ENERpower branded BMS 20A-22A. The charging is done with a spiral cable (20-100 cm extendable) with an XLR-3-pin connector. Discharging is done via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A safety fuse of 30A in a waterproof mount limits the power consumption and provides an additional safety measure.
This battery is also suitable for engines with up to 950 watts of power.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
The high-quality Roswheel Attack bike-frame bag makes it easy to place the battery under the top frame (as seen in the photos). This carrying bag is water-spray-tight and can carry up to about 5 kg.
Compatible with engines
250 watts / 500 watts / 750 watts / 950 watts
Battery – Highlights
High-quality manufacturing – made in Germany
Assembly just-in-time
BMS with integrated passive balancer (4.1V pro rechargeable cell)
BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
Assembly with Samsung SDI, Panasonic (Sanyo) or LG Chem cells (subject to availability)
directly from the manufacturer
Rechargeable – After 300 charging cycles maintains 80% of the original capacity
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
Battery – Technical Data
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V 48.1V)
Capacity: 15 Ah
Power: About 720Wh
Configuration: 13S3P
Internal resistance: < 75 mOhm
Charge Voltage: 54.6V
Maximum Charging current: 5A
End-of-Discharge Voltage: 39V
Continuous Discharge Current: 20A = 950 watts
10 seconds 30A: approx. 1440 watts
Weight: Approx. 3 kg. (Battery only)
Dimensions: 305 x 75 x 74 mm
Roswheel Attack Bike-Frame Bag
Waterproof
With 6 x Velcro-fastener can be attached to any part of the bike-frame
Suitable as frame bag for batteries up to 5 kg.
ENERpower Softpack battery 48V in format 13S4P | 960 Wh | capacity 20 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 20 Ah
Power: approx. 960 Wh
Configuration: 13S4P (set up: 13×4)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 20A = 950 watts
5 seconds discharge current: 30A = 1440 watts
Weight: 3 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
Length: ca. 305 mm
Width: ca. 92 mm – 102 mm
Height: ca. 75 mm
ENERpower Softpack battery 48V in format 13S5P | 1200 Wh | capacity 25 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E /
INR21700-M50LT
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E /
INR21700-M50LT
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 25 Ah
Power: approx. 1200 Wh
Configuration: 13S5P (set up: 10×6)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: 4.65 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 300 mm
Width: 110 mm – 125 mm
Height: 72 mm
ENERpower Softpack battery 48V in format 13S6P | 1440 Wh | capacity 30 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E /
LG INR21700-M50T
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell:
LG INR21700-M50T / INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 30 Ah
Power: approx. 1440 Wh
Configuration: 13S6P (set up: 13×6)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: 6.65 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 286 mm
Width: 132 mm – 145 mm
Height: 72 mm