Filter
–
BUNDLE
Softpack Battery 43.2V 20Ah BMS 30A XLR-3 12S
€405.00*
Prod. no.:
118993
ENERpower Softpack battery 48V in format 12S4P | 865 Wh | capacity 20 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E, or LG INR21700-M50T
Important General Information
The 12S batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 6 cells are used on one side (ca. 145 mm). We manufacture this type of battery in the formats 12S3P (construction 6×6), 12S4P (construction 8×6), 12S5P (construction 10×6)
In the rectangular version, 12 cells are used on the longest side (ca. 285 mm). We assemble this type of battery in the formats 12S2P (construction 12×2), 12S3P (12×3), 12S4P (12×4), 12S5P (12×5) and 12S6P (12×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 12S motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E / INR21700-M50T
Voltage (nominal): 12S (43.2V - 44.4V)
Capacity: 20 Ah
Power: approx. 865 Wh
Configuration: 12S4P (set up: 12×4)
Internal resistance: < 75 mOhm
Charge voltage: 50.4V
End-of-discharge voltage: 36V
Continuous discharge Current: 30A = 1200 watts
5 seconds discharge current: 40A = 1600 watts
Weight: around 3.55 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
Length: 285 mm
Width: 92 mm – 110 mm
Height: 74 mm
BUNDLE
Softpack Battery 43.2V 25Ah BMS 30A XLR-3 12S
€485.00*
Prod. no.:
119001
ENERpower Softpack battery 48V in format 12S5P | 1080 Wh | capacity 25 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E, or LG INR21700-M50T
Important General Information
The 12S batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 6 cells are used on one side (ca. 145 mm). We manufacture this type of battery in the formats 12S3P (construction 6×6), 12S4P (construction 8×6), 12S5P (construction 10×6)
In the rectangular version, 12 cells are used on the longest side (ca. 285 mm). We assemble this type of battery in the formats 12S2P (construction 12×2), 12S3P (12×3), 12S4P (12×4), 12S5P (12×5) and 12S6P (12×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 12S motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E / INR21700-M50T
Voltage (nominal): 12S (43.2V - 44.4V)
Capacity: 25 Ah
Power: approx. 1080Wh
Configuration: 12S5P (set up: 12×5)
Internal resistance: < 75 mOhm
Charge voltage: 50.4V
End-of-discharge voltage: 36V
Continuous discharge Current: 30A = 1200 watts
5 seconds discharge current: 40A = 1600 watts
Weight: around 4.45 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
Length: 285 mm
Width: 120 mm – 140 mm
Height: 74 mm