- Electromobility
- Energy Storage
- PV technology
- Chargers
- Rechargeable Batteries
-
Battery Packs & Parts
-
Li-Ion Battery Packs
- Batteries 1S (3.6V-3.7V)
- Batteries 2S (7.2V-7.4V)
- 3S Batteries (10.8V-11.1V)
- Batteries 4S (14.4V-14.8V)
- Li-Ion Battery 5S (18V - 18.5V)
- Li-Ion Akkus 6S (21,6V-22,2V)
- Batteries for electrical devices
- eBoat Batteries
- Industry
- Ni-Mh Batteries
- starter battery 12V LiFePo4
- LiFePO4 Battery Packs
- Li-ion Batteries for LED-Flashlights
- LiFePo4 Battery Packs
- Battery Pack Accessories
- DIY Batteries (no BMS)
-
Li-Ion Battery Packs
Filter
–
Filter
–
BUNDLE
ENERpower 4S2P battery 14.4V-14.8V 10Ah 50E Li-Ion DC Connector Male Battery indicator for Breas Z1 Auto & Base
€75.00*
Prod. no.:
11798
The ENERpower 4S2P is a Li-ion battery with a charging and discharging with DC Connector Male. The battery has a nominal voltage of 14.4V-14.8V and is built up in a cube format (about 85 mm/72 mm/45 mm)
You can use this battery as a replacement for the Breas Z1 Auto and Breas Z1 Base oxygen resuscitation apparatus. Since the device switches off at 14V, you must charge the battery as soon as the battery has 2 lights on the charge level indicator.
You can order the appropriate charger and an extension cable in the bundle
Highlights
With a high-quality PCB (protective circuit) of 8A (115W)
Rechargeable up to 500 times
Open ends cable
Cable length: About 10-15 cm
High capacity for a longer runtime
After 300 charging cycles still maintains approx. 80% of the original capacity
IC Protection / PCB with protection against short-circuit, overload and deep discharge
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
High-quality battery cells with long service life and high cycle stability
Technical data
Min. capacity: 9800 mAh
Type. Capacity: 10000 mAh
Nominal voltage: 14.4V-14.8V
Charging voltage: 16.8V
Discharge Voltage: 12V
Configuration 4S2P Cubic
Weight: About 605 g.
Length/width/height: 85/72/45 mm
Protective circuit: PCB 8A
Maximum power: 115 watts
Charging/Discharging: Cable open ends
Cable length: About 10-15 cmImportant:We would like to thank Mr. Gnep for his contribution with images
BUNDLE
ENERpower 4S2P battery 14.4V-14.8V 6800 mAh Li-Ion DC Connector Male Battery indicator for Breas Z1 Auto & Base
€59.99*
Prod. no.:
11797
The ENERpower 4S2P is a Li-ion battery with a charging and discharging on a DC Cable. The battery has a nominal voltage of 14.4V-14.8V and is built up in a cube format (about 72 mm/ 65 mm / 36 mm)
You can use this battery as a replacement for the Breas Z1 Auto and Breas Z1 Base oxygen resuscitation apparatus. Since
the device switches off at 14V, you must charge the battery as soon as
the battery has 2 lights on the charge level indicator.
You can order the appropriate charger and an extension cable in the bundle
Highlights
6800 mAh (about 98 Wh)
With a high-quality PCB (protective circuit) of 5A (70W)
Rechargeable up to 500 times
DC Round 5,5 mm / 2,1 mm
Cable length: About 10-15 cm
High capacity for a longer runtime
After 300 charging cycles still maintains approx. 80% of the original capacity
IC Protection / PCB with protection against short-circuit, overload and deep discharge
No memory effect – charge the battery whenever you want
Environmentally friendly according to EU Directive 2002/95/EC (RoHS)
High-quality battery cells with long service life and high cycle stability
Technical data
Min. capacity: 6700 mAh
Type. Capacity: 6800 mAh
Nominal voltage: 14.4V-14.8V
Charging voltage: 16.8V
Discharge Voltage: 12V
Configuration 4S2P Cubic
Weight: About 450 g.
Length/width/height: 72 / 65 /36 mm
Protective circuit: PCB 5A
Maximum power: 70 watts
Charging/Discharging: Cable DC male
Cable length: About 10-15 cm
Important:We would like to thank Mr. Gnep for his contribution with images