Tip
BUNDLE
HaiLong Reention Jaffa Bike-Frame Battery Li-Ion 52V 16Ah (830Wh)
€395.00*
Prod. no.:
11701
ENERpower Bike-Frame-Battery Li-Ion Hailong Reention Jaffa DIY 52V (14S) from own manufacturing 16Ah (830Wh)
For motors from 250 Watts and up to 1050 Watts
This 52V battery in the Hailong Reention Jaffa case, which we manufacture, can be mounted on the frame or on the luggage carrier of the bike. The batteries are manufactured in cell holders made of plastic. Charging is made possible with a DC circular connector (5.5 mm / 2.5 mm), discharging via the bracket (separable from the battery) with XT90, XT60, or Anderson (surcharge) connector. This case can hold up to 70 18650 battery cells. With a BMS that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 1050 watts of power, working in 52V (14S) systems.The battery holder is very small and therefore we implement the Fuse inside the Discharge Cable
The On/Off button enable the user the turn the battery on and off as an additional feature.
Highlights
High quality assembly – Made in Germany
Assembly Just-In-Time
BMS with an integrated passive balancer
BMS with protection against overcharge, over-discharge, deep-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 500 charging cycles, still maintaines about 70% of the original capacity
No memory effect – charge your battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Details
Li-Ion-cell: LG Chem INR18650-MH1
Voltage (nominal): 52V (50.4V-51.8V)
Capacity: 16Ah
Power: 830Wh
Configuration: 14S5P
Internal resistance: < 75 mOhm
Charge Voltage: 58.8V
End-of-discharge Voltage: 42V
BMS continueous discharge current: 22A
BMS 10 Min. discharge current: 25A
BMS 5 Sec. discharge current: 30A
Safety fuse: 30A
Weight: approx. 3.95 Kg.
Charging: Zenith IP67 3-Pins
Discharging: Cable with fuse 30A with XT-60
Softpack Battery 52V 12Ah BMS 30A XLR-3 with 40T XT-90
€299.99*
Prod. no.:
11872
ENERpower Softpack battery 52V in format 14S3P | 630 Wh | capacity 12 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-40T.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 52V motors
up to 1550 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-40T
Voltage (nominal): 52V (50.4V - 51.8V)
Capacity: 12 Ah
Power: approx. 630 Wh
Configuration: 14S3P (set up: 14×3)
Internal resistance: < 75 mOhm
Charge voltage: 58.8V
End-of-discharge voltage: 42V
Continuous discharge Current: 30A = 1550 watts
Weight: ca. 3.20 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 325 mm
Width: 66 mm – 76 mm
Height: 74 mm
BUNDLE
Softpack Battery 52V 14 x 2 Smart BMS 30A XLR-3 Super Drain (10Ah) XT-90
€295.00*
Prod. no.:
11529
ENERpower Softpack battery 36V, format 14S2P rectangular | for Pedelecs, eBikes DIY | Super Drain
Important General Information
We manufacture a range of Super Drain batteries in softpacks in Berlin. These batteries are small in size and weight and are made with high-current INR21700-40T or INR21700-50S battery cells. The Smart BMS (Battery Management System) with a continuous load capacity of 30A is always mounted on the longest side of the battery, resulting in an approximately 20mm thicker section at that point.
This battery is designed for users who typically complete short and demanding distances, as well as for situations where overall weight plays a crucial role (off-road, inclines, etc.).
The softpack batteries are constructed with FR4 insulation, which is a flame-resistant and fire-retardant composite material consisting of epoxy resin and fiberglass fabric. FR-4 is commonly used as an electrically non-conductive substrate in printed circuit boards.
Additionally, this battery features an LED status indicator located on the top side of the battery. The indicator displays the battery's charge level in the following steps: "Empty," "25%," "50%," "75%," and "Full."
Compatible with 52V motors
Up to 1560 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: INR21700-50S
Voltage (nominal): 52V (14S)
Capacity: 10 Ah
Power: approx. 510 Wh
Configuration: 14S2P (set up: 14×2)
Internal resistance: < 75 mOhm
Charge voltage: 58.8V
End-of-discharge voltage: 42V
Continuous discharge Current: 30A = 1560 watts
Charging Current (Max): 8A
Weight: 2.2 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 330 mm
Width: 50 mm – 70 mm
Height: 72 mm
BUNDLE
Softpack Battery 52V 25Ah BMS 30A XLR-3 with M50T XT-90
€545.00*
Prod. no.:
11897
ENERpower Softpack battery 52V in format 14S5P | 1300 Wh | capacity 25 Ah | for Pedelecs, eBikes DIY | with INR21700-M50T.
Important General Information
The 52V (14S) batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 40A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 14S3P (construction 10×5), 14S4P (construction 10×6), 14S5P (construction 10×7) and 14S6P (construction 10×9) etc.
In the rectangular version, 14 cells are used on the longest side (288 mm). We assemble this type of battery in the formats 14S2P (construction 14×2), 14S3P (14×3), 14S4P (14×4), 14S5P (14×5) and 14S6P (14×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: INR21700-M50T
Voltage (nominal): 52V (50.4V - 51.8V)
Capacity: 25 Ah
Power: approx. 1300 Wh
Configuration: 14S5P (set up: 14×5)
Internal resistance: < 75 mOhm
Charge voltage: 58.8V
End-of-discharge voltage: 42V
Continuous discharge Current: 30A = 1500 watts
5 seconds discharge current: 40A = 2050 watts
Weight: 5.35 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 325 mm
Width: 120 mm – 140 mm
Height: 74 mm