ENERpower softpack battery 36V | Format 10S14P | Energy 2600Wh | Capacity 70Ah | for industrial machines, pedelecs, eBikes, eRickshaws, electric cargo bikes, electric boats DIY | with LG Chem INR21700-M50TL | For consumers with a power of up to 1800 watts General Information This battery is assembled on 2 levels. The battery is approx. 250 x 150 x 160 mm and weighs approx. 10.70 kg. We can manufacture the battery with and without a charge level indicator and can be offered with a cable for charging and discharging, or with 2 separate cables   Smart BMS (Battery Management System) This battery is manufactured with a Smart BMS with 50A continuous load (for 36V consumers with up to 1800 watts of power). A Smart BMS is digitally programmed and controlled in comparison to an analog BMS. The monitoring of voltage (overcharge and deep discharge), current (overdischarge) and temperature are more accurate. A Bluetooth is integrated in this battery, with which the data can be called up via an app scope of application We have developed this series of batteries for light electric vehicles such as electric rickshaws, electric cargo bikes, but also for robots, machines and electric boat motors Compatible with 36V motors 250 watts / 500 watts / 750 watts / 1200 watts / 1500 watts / 1800 watts Highlights High quality production - Made in Germany Just-in-time manufacturing Smart BMS with an integrated passive balancer Direct from the manufacturer Rechargeable - Still 80% of original capacity after 500 charge cycles No memory effect - charge the battery whenever you want Environmentally friendly according to EU directive 2002/95 / EG (RoHS) Technical specifications     Li-ion cell: LG Chem INR21700-M50TL     Voltage (nominal): 36V (37V)     Capacity: 70Ah     Energy: approx. 2600 Wh     Configuration: 10S14P     Charging voltage: 42V     End-of-discharge voltage: 30V     Charging Current (Max.): 20A     Continuous discharge current: 50A = 1800 watts     Weight: approx. 10.70 kg.     Dimensions: 250 x 150 x 160 mm     Load: XT-60, XT-90, Anderson, or Weipu     Discharge connector: XT-60, or XT-90  

ENERpower soft-pack battery 24V in format 7S2P | Capacity 10Ah | for Pedelecs, eBikes DIY | with LG Chem INR21700 50M. Important General Information The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.Highlights Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion cell: LG Chem INR21700 M50 Voltage (nominal): 24V (25.2V - 25.9V) Capacity: 10Ah Power: approx. 240 Wh Configuration: 7S2P Construction: 5 x 3 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-o-fdischarge voltage: 21V Continuous discharge current: 20A = 480 watts 10 min. discharge current: 25A = 600 watts 5 seconds discharge current: 35A = approx. 850 watts Weight: Approx. 1.2 kg. Dimensions Length: 125 mm Länge Width: 75 mm Height: 80 mm

ENERpower Softpack battery 24V in format 7S5P | 360Wh | capacity 15Ah | for Pedelecs, eBikes DIY, Electric Boats, Maschines, Robotics | with Samsung 30T. Important General Information This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.   This range of small and powerful batteries we assemble with the impressive cell of Samsung SDI INR21700-30T. This battery cell hold a very stable voltage also at high discharge current and can operate 24V devices with up to 1200 Watt consumption.  Thus, this battery is also suitable for motors with 1200 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards. Compatible with 24V motors 250 watts / 350 watts / 500 watts / 750 watts / 1000 / 1200 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion battery cell: Samsung SDI INR21700-30T Voltage (nominal): 24V (25.2V – 25.9V) Capacity: 15Ah Energy: approx. 360 Wh Configuration: 7S5P Format: 7 × 5 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-of-discharge voltage: 21V Continuous discharge current: 50A = 1200 Watt 5 Sec. discharge current: 60A = ca. 1440 Watt Charging: up to 8A Discharging temperture: -20 to 80°C Weight: approx. 2.75 kg. Dimensions Length: 160 mm Länge Width: 115 mm – 135 mm Height: 70 mm

ENERpower soft-pack battery 24V in format 7S3P | Capacity 15Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E Important General Information The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.   The INR18650-30Q can be discharged up to -20 Degrees, Charging at > 0 Degrees Compatible with 24V motors 250 Watt / 350 Watt / 450 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 24V (25.2V - 25.9V) Capacity: 15 Ah Power: approx. 375 Wh Configuration: 7S3P Construction: 7 x 3 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-o-fdischarge voltage: 21V Continuous discharge current: 20A = 480 watts 10 min. discharge current: 25A = 600 watts 5 seconds discharge current: 35A = approx. 850 watts Weight: Approx. 1.55 kg. Dimensions Length: 140 mm Länge Width: 100 mm – 115 mm Height: 70 mm

ENERpower Softpack battery 24V in format 7S6P | 440Wh | capacity 18Ah | for Pedelecs, eBikes DIY, Electric Boats, Maschines, Robotics | with Samsung 30T. Important General Information This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.   This range of small and powerful batteries we assemble with the impressive cell of Samsung SDI INR21700-30T. This battery cell hold a very stable voltage also at high discharge current and can operate 24V devices with up to 1200 Watt consumption.  Thus, this battery is also suitable for motors with 1200 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards. Compatible with 24V motors 250 watts / 350 watts / 500 watts / 750 watts / 1000 / 1200 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion battery cell: Samsung SDI INR21700-30T Voltage (nominal): 24V (25.2V – 25.9V) Capacity: 18Ah Energy: approx. 440 Wh Configuration: 7S6P Format: 7 × 6 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-of-discharge voltage: 21V Continuous discharge current: 50A = 1200 Watt 5 Sec. discharge current: 60A = ca. 1440 Watt Charging: up to 8A Discharging temperture: -20 to 80°C Weight: approx. 3.35 kg. Dimensions Length: 160 mm Länge Width: 138 mm – 160 mm Height: 70 mm

ENERpower soft-pack battery 24V in format 7S4P | Capacity 20Ah | for Pedelecs, eBikes DIY | with  INR21700 50E. Important General Information The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.Highlights Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion cell: LG Chem INR21700 M50 Voltage (nominal): 24V (25.2V - 25.9V) Capacity: 20Ah Power: approx. 480 Wh Configuration: 7S7P Construction: 7 x 4 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-o-fdischarge voltage: 21V Continuous discharge current: 20A = 480 watts 10 min. discharge current: 25A = 600 watts 5 seconds discharge current: 35A = approx. 850 watts Weight: Approx. 2.4 kg. Dimensions Length: 165 mm Länge Width: 100 mm - 115 mm (Side of BMS) Height: 74 mm

ENERpower soft-pack battery 24V in format 7S5P | Capacity 25Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E Important General Information The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards. Compatible with 24V motors 250 Watt / 350 Watt / 450 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion cell: Samsung SDI INR21700-50E Voltage (nominal): 24V (25.2V - 25.9V) Capacity: 25 Ah Power: approx. 600 Wh Configuration: 7S5P Construction: 7 x 5 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-o-fdischarge voltage: 21V Continuous discharge current: 20A = 480 watts 10 min. discharge current: 25A = 600 watts 5 seconds discharge current: 35A = approx. 850 watts Weight: Approx. 2.75 kg. Dimensions Length: around 160 mm Width: around 115 mm – 135 mm Height: around 74 mm

ENERpower soft-pack battery 24V in format 7S6P | Capacity 30Ah | for Pedelecs, eBikes DIY | withWith LG INR21700-50M. Important General Information The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards. Compatible with 24V motors 250 Watt / 350 Watt / 450 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion cell: LG INR21700-50M Voltage (nominal): 24V (25.2V - 25.9V) Capacity: 30 Ah Power: approx. 720 Wh Configuration: 7S6P Construction: 7 x 6 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-o-fdischarge voltage: 21V Continuous discharge current: 20A = 480 watts 10 min. discharge current: 25A = 600 watts 5 seconds discharge current: 35A = approx. 850 watts Weight: Approx. 3.2 kg. Dimensions Length: 154 mm Länge Width: 132 mm – 142 mm Height: 70 mm

ENERpower Softpack battery 24V in format 7S7P | 840Wh | capacity 35Ah | for Pedelecs, eBikes DIY | with LG Chem 50M. Important General Information This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.   A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.Thus, this battery is also suitable for motors with 1000 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.In this battery we have also integrated a charge indicator. In 5 levels (empty / 25% / 50% / 75% / full) you can easily read the battery condition. Compatible with 24V motors 250 watts / 350 watts / 500 watts / 750 watts / 1000 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Samsung SDI INR18650-35E Li-Ion Cells –> 10A continuous load Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion battery cell:LG Chem INR21700 50M Voltage (nominal): 24V (25.2V – 25.9V) Capacity: 35 Ah Energy: approx. 840 Wh Configuration: 7S7P Format: 7×7 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-of-discharge voltage: 21V Continuous discharge current: 20A = 480 Watt 10 Min. discharge current: 40A = 1000 Watt 5 Sec. discharge current: 45A = ca. 1125Watt Weight: approx. 3.65 kg. Dimensions Length: 154 mm Länge Width: 154 mm – 165 mm Height: 70 mm

ENERpower Softpack battery 24V in format 7S10P | 1260Wh | capacity 50Ah | for Pedelecs, eBikes DIY | with Samsung 50E. Important General Information This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.   A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.Thus, this battery is also suitable for motors with 1000 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards. Compatible with 24V motors 250 watts / 350 watts / 500 watts / 750 watts / 1000 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion battery cell: Samsung SDI INR21700-50E Voltage (nominal): 24V (25.2V – 25.9V) Capacity: 50Ah Energy: approx. 1260 Wh Configuration: 7S10P Format: 10 ×7 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-of-discharge voltage: 21V Continuous discharge current: 40A = 1000 Watt 5 Sec. discharge current: 50A = ca. 1200 Watt Weight: approx. 5.40 kg. Dimensions Length: 230 mm Länge Width: 160 mm – 175 mm Height: 70 mm

ENERpower Softpack battery 24V in format 7S10P | 1200Wh | capacity 50Ah | for Pedelecs, eBikes DIY | with Samsung 50E. Important General Information This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.  Thus, this battery is also suitable for motors with 1200 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards. Compatible with 24V motors 250 watts / 350 watts / 500 watts / 750 watts / 1000 / 1200 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion battery cell: Samsung SDI INR21700-50E Voltage (nominal): 24V (25.2V – 25.9V) Capacity: 50Ah Energy: approx. 1200 Wh Configuration: 7S10P Format: 10 ×7 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-of-discharge voltage: 21V Continuous discharge current: 50A = 1200 Watt 5 Sec. discharge current: 60A = ca. 1440 Watt Weight: approx. 5.50 kg. Dimensions Length: 230 mm Länge Width: 160 mm – 175 mm Height: 70 mm

ENERpower Softpack battery 24V in format 7S12P | 1500Wh | capacity 60Ah | for Pedelecs, eBikes DIY | with Samsung 50E. Important General Information This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.   A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.Thus, this battery is also suitable for motors with 1000 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards. Compatible with 24V motors 250 watts / 350 watts / 500 watts / 750 watts / 1000 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion battery cell: Samsung SDI INR21700-50E Voltage (nominal): 24V (25.2V – 25.9V) Capacity: 60Ah Energy: approx. 1500 Wh Configuration: 7S12P Format: 12 ×7 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-of-discharge voltage: 21V Continuous discharge current: 40A = 1000 Watt 5 Sec. discharge current: 50A = ca. 1200 Watt Weight: approx. 6.50 kg. Dimensions Length: 280 mm Länge Width: 160 mm – 175 mm Height: 70 mm

ENERpower Softpack battery 24V in format 7S12P | 1500Wh | capacity 60Ah | for Pedelecs, eBikes DIY | with Samsung 50E. Important General Information This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.  Thus, this battery is also suitable for motors with 1200 watts of power.We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards. Compatible with 24V motors 250 watts / 350 watts / 500 watts / 750 watts / 1000 / 1200 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion battery cell: Samsung SDI INR21700-50E Voltage (nominal): 24V (25.2V – 25.9V) Capacity: 60Ah Energy: approx. 1500 Wh Configuration: 7S12P Format: 12 ×7 Internal resistance: < 75 mOhm Charging voltage: 29.4V End-of-discharge voltage: 21V Continuous discharge current: 50A = 1200 Watt 5 Sec. discharge current: 60A = ca. 1440 Watt Weight: approx. 6.50 kg. Dimensions Length: 280 mm Länge Width: 160 mm – 175 mm Height: 70 mm

ENERpower Softpack battery 36V, format 10S2P rectangular | for Pedelecs, eBikes DIY | Super Drain Important General Information We manufacture a range of Super Drain batteries in softpacks in Berlin. These batteries are small in size and weight and are made with high-current INR21700-40T or INR21700-50S battery cells. The Smart BMS (Battery Management System) with a continuous load capacity of 30A is always mounted on the longest side of the battery, resulting in an approximately 20mm thicker section at that point. This battery is designed for users who typically complete short and demanding distances, as well as for situations where overall weight plays a crucial role (off-road, inclines, etc.). The batteries are manufactured in a 36V (10S) configuration, with options available in a 5x4 or 10x2 setup. The softpack batteries are constructed with FR4 insulation, which is a flame-resistant and fire-retardant composite material consisting of epoxy resin and fiberglass fabric. FR-4 is commonly used as an electrically non-conductive substrate in printed circuit boards. Additionally, this battery features an LED status indicator located on the top side of the battery. The indicator displays the battery's charge level in the following steps: "Empty," "25%," "50%," "75%," and "Full."   Compatible with 36V motors Up to 1080 Watt Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: INR21700-40T, or INR21700-50S Voltage (nominal): 36V (37V) Capacity: 8Ah / 10 Ah Power: approx. 288 Wh / 360 Wh Configuration: 10S2P (set up: 10×2) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Continuous discharge Current: 30A = 1080 watts Charging Current (Max): 8A Weight: 1.6 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 / XT-60 Dimensions Length: 235 mm Width: 50 mm – 70 mm Height: 72 mm

ENERpower Softpack battery 36V, format 10S2P rectangular | 360 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | LG Chem M50. Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 Watts / 500 Watts / 540 Watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) With battery cells INR21700-M50 from LG Chem Direct from the manufacturer Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity No memory effect - charge the battery whenever you want Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS) Technical Specifications Li-ion Cell: LG Chem INR21700-M50 Voltage (nominal): 36V (37V) Capacity: 10 Ah Power: approx. 360 Wh Configuration: 10S2P (set up: 10×2) Internal resistance: < 75 mOhm Charge voltage: 42V End-of-discharge voltage: 30V Continuous discharge Current: 15A = 720 watts 10 minutes discharge Current: 20A = 900 watts 5 seconds discharge current: 25A = 1080 watts Weight: 1.6 Kg. Charge connector (connects to the charger): XLR-3 (3 pins) Discharge connector (connects to the motor): XT-90 Dimensions Length: 220 mm Width: 44 mm – 56 mm Height: 72 mm

ENERpower Softpack battery 36V, format 10S2P, square) | 360 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | LG Chem M50. Important General Information The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain. In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8). In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6). The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards. In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery Compatible with 36V motors 250 watts / 500 watts / 540 watts / 700 watts Highlights High-quality production - Made in Germany Production Just-In-Time BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring) With battery cells INR21700-M50 from LG Chem Direct from the manufacturer Rec