48V controller in Bracket 5-pins 14A for Hailong Pro, Hailong Plus UDX, UniMoke
This is a replacement controller, integrated in the holder, for Urban Drive Style electric Bikes that have a Hailong Pro (48V 13.80Ah) or Hailong Plus (48V 16Ah or 17.50Ah) batterybattery
Manufacturer: MXUS
Output: 48V 14A
ENERpower battery LiFePO4 48V (15S) for the operation of 48V devices, motors etc.
Important general informationWe assemble this series of LiFePo4 batteries in the 15S (48V) format with battery cells from Haidi. All battery cells have important safety certifications such as UL and IECOur batteries are light (compared to lead acid batteries) and can reach up to 2000 charging cycles.The batteries are manufactured with 2 outputs (charging / discharging). For charging (up to 8A charging current) we use an XLR-3 connector. For unloading you can choose between XT-60, XT-90 or Anderson PowerPoleYou can purchase the battery with a BMS of 20A - for devices with a consumption of up to 950 wattsThe protection against overcharging (55V) and against deep discharge (30V) avoids damage to the battery and increases the safety factor.We manufacture these batteries with a charge status indicator so that you can see the charge status of the battery at any time. highlights
High-quality production in Germany
BMS with an integrated passive balancer
BMS with protection against overcharging, deep discharging, overdischarging (temperature monitoring)
Direct from the manufacturer
Rechargeable - Still 80% of original capacity after 1800 full charge cycles
No memory effect - charge the battery whenever you want
Environmentally friendly according to EU directive 2002/95/EG (RoHS)
Technical specifications
Voltage (nominal): 48V (15S)
Capacity: 20Ah
Configuration: 15S5P
Energy: about 960Wh
Discharge Current: 20A
Maximum charging current: 8A
Internal resistance: < 70mOhm
Charging voltage: 54V
End-of-discharge voltage: 30V
Weight: approx. 6 kg.
Charging: XLR-3
Discharge: XT-60 / XT-90 / Anderson PowerPole
Dimensions:
ca. 220 x 130 x 140 mm
Atnen fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Manufacturer: Modiary
Cable length: approx. 100 cm
Output: 4A - fast and powerful
Connector: Anderson PowerPole
Input: 100 - 240 V AC
Model: MDA222
CC/CV with end-of-charge voltage of 42V + 0.2V
Suitable for Li-ion batteries 36V
Efficiency: approx. 90%
Power: 170 watts
Safety
Over current protection: <4.4A
Short circuit protection: 3.5W
Reverse polarity protection
UL, FCC und GS (TÜV) approved
Atnen fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Manufacturer: Modiary
Cable length: approx. 100 cm
Output: 4A - fast and powerful
Connector: selectable, DC 5.5 x 2.1 mm
Input: 100 - 240 V AC
Model: MDA222
CC/CV with end-of-charge voltage of 42V + 0.2V
Suitable for Li-ion batteries 36V
Efficiency: approx. 90%
Power: 170 watts
Safety
Over current protection: <4.4A
Short circuit protection: 3.5W
Reverse polarity protection
UL, FCC und GS (TÜV) approved
Atnen fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Manufacturer: Modiary
Cable length: approx. 100 cm
Output: 4A - fast and powerful
Connector: selectable, DC / XLR-3 / XLR-4 / XLR-5
Input: 100 - 240 V AC
Model: MDA222
CC/CV with end-of-charge voltage of 42V + 0.2V
Suitable for Li-ion batteries 36V
Efficiency: approx. 90%
Power: 170 watts
Safety
Over current protection: <4.4A
Short circuit protection: 3.5W
Reverse polarity protection
UL, FCC und GS (TÜV) approved
Atnen fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Manufacturer: Modiary
Cable length: approx. 100 cm
Output: 4A - fast and powerful
Connector: selectable, DC 5.5 x 2.1 mm
Input: 100 - 240 V AC
Model: MDA222
CC/CV with end-of-charge voltage of 42V + 0.2V
Suitable for Li-ion batteries 36V
Efficiency: approx. 90%
Power: 170 watts
Safety
Over current protection: <4.4A
Short circuit protection: 3.5W
Reverse polarity protection
UL, FCC und GS (TÜV) approved
Atnen fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Manufacturer: Modiary
Cable length: approx. 100 cm
Output: 4A - fast and powerful
Connector: XT-90 female
Input: 100 - 240 V AC
Model: MDA222
CC/CV with end-of-charge voltage of 42V + 0.2V
Suitable for Li-ion batteries 36V
Efficiency: approx. 90%
Power: 170 watts
Safety
Over current protection: <4.4A
Short circuit protection: 3.5W
Reverse polarity protection
UL, FCC und GS (TÜV) approved
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Jericho 36V 20Ah
You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs.
General Information
This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display + Charger
You can choose a suitable display and charger from our bundle offers
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Jericho
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR21700 M50T
Voltage (nominal): 36V (37V)
Capacity: 20Ah
Energy: approx. 720Wh
Configuration: 10S4P
Internal resistance: < 75 mOhm
Charging voltage: 42V
End-of-discharge voltage: 30V
Maximal charging: 5A
Continuous discharge current: 20A = 720 Watt
10 Min. discharge current: 25A = 900 Watt
5 Sec. discharge current: 35A = 1260 Watt
Constant load per cell: approx. 3.7A or 7A in peak load.
Weight: approx. 3.25 Kg
Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Megiddo 36V 25Ah
You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs.
General Information
This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site
Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2B has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket.
Technical Details
Motor
Manufacturer:Tongsheng (China)
Model: TSDZ2B
Motor tyep: mid-motor
Wheel diameter: 16' - 28'
Energy: 250W - 350W
Voltage: 36V
Torque: 50N.m - 80N.m
Level of support: 36% ~ 300%
Maximal speed: 25Km/h
Weight: 3.3 Kg.
Display + Charger
You can choose a suitable display and charger from our bundle offers
Battery - Highlights
High quality assembling – Made in Germany
Assembling Just-In-Time
BMS with an integrated balancer
BMS with protection against overcharge, deep discharge, over discharge (temperature control)
Direct from the manufacturer
Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
No memory-effect – charge the battery whenever you want
Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)
Battery - Technical Details
Manufacturer: ENERpower (Germany)
Case: Hailong Megiddo
Type: Bike-frame battery
Li-ion battery cell: LG Chem INR21700 M50T
Voltage (nominal): 36V (37V)
Capacity: 25Ah
Energy: approx. 900Wh
Configuration: 10S5P
Internal resistance: < 75 mOhm
Charging voltage: 42V
End-of-discharge voltage: 30V
Maximal charging: 5A
Continuous discharge current: 20A = 720 Watt
10 Min. discharge current: 25A = 900 Watt
5 Sec. discharge current: 35A = 1260 Watt
Constant load per cell: approx. 3.7A or 7A in peak load.
Weight: approx. 4 Kg
Ultra-fast charger CCCV 550W (58.8V / 9A charging current) for 52V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: EN60335
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
550W output power (up to 9A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 7A (Max.)
Output
58.8V DC 9A
Safety Measures
Over current protection: < 9.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Dimensions:
200 x 91 x 63 mm
Weight:
Around 1.3 Kg.
High quality charger from Atnen for 48V Li-ion batteries (13S) 165W, 3A output current
In this charger, the charging voltage was reduced from 54.6V to 53.3V (4.13V per battery cell) to give 48V 13S batteries a longer service life. Please make sure that around 10% of the nominal capacity is not available
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 3A – quick and strong
COnnectoer: DC 5.5mm / 2.5mm or XLR-3
Input: 100 – 240V AC
Manufacturer: Atnen
Model: LBC015480301
CC/CV with End-of-Charge voltage of 53.3V + 0.2V
Charges Li-ion batteries of 48V 13S (nominal voltage 46.8V – 48.1V)
GS – certified safety standards according to § 21 ProdSG
Efficiency: ca. 85%
Power: 165W
Safety
Over-current protection: < 3.4A
Short-circuit protection: 3.5W
Reversed-polarity protection
Compatibility
A variety of li-ion batteries of 48V, type 13S (nominal voltage of 46.8V – 48.1V)
Atnen fast charger CCCV 85W (42V / 2A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
85W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.2A (Max.)
Output
42V DC 2A
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with (i.a.)
FischerECU 1401 (ab 2015), ECU 1405, ECU 1501, ECU 1502, ECU 1503, ECU 1601, ECU 1602, ECU 1603, ECU 1703, ECU 1800, ECU 1801, ECU 1803, ER 1704, ER 1804, ETD / ETH 1401 (from year of construction 2015), ETH 1612, Fischer cargo bike LEO 1.0DevronSF-06S and DT-09 Devron e-bike batteries: 28161, 28162, Riddle M1.7 and Riddle W1.7LifebikeLifebike Classic + G7BatavusTorino, Genoa, Bronx, Blockbuster, Verona und Diva (2013-2019)PhylionAkkus SF03, SF06, JCEB360
Replaces Charger Phylion SSLCO84V42XH
Atnen fast charger CCCV 85W (42V / 2A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
85W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.2A (Max.)
Output
42V DC 2A
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with (i.a.)
Sparta E-motion C2 Modell from 2014 Sparta E-motion C3 Modell from 2014 Sparta E-motion C5 Modell from 2014 Sparta Mojo-E Modell from 2014Sparta Pick Up E Modell from 2014
Replaces Charger Phylion SSLCO84V42XH
Atnen fast charger CCCV 85W (42V / 2A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
85W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.2A (Max.)
Output
42V DC 2A
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with Fischer:
CITA 5.0i
CITA 6.0i
VIATOR 5.0i
EM 1966i
MONTIS 5.0i
MONTIS 6.0i
Atnen fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 3A
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with (i.a.)
Batavus E-go Genova (2014-
Batavus E-go Allegro (2014-
Batavus E-go Monaco (2014-
Atnen fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 3A
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with (i.a.)
FischerECU 1401 (ab 2015), ECU 1405, ECU 1501, ECU 1502, ECU 1503, ECU 1601, ECU 1602, ECU 1603, ECU 1703, ECU 1800, ECU 1801, ECU 1803, ER 1704, ER 1804, ETD / ETH 1401 (from year of construction 2015), ETH 1612, Fischer cargo bike LEO 1.0DevronSF-06S and DT-09 Devron e-bike batteries: 28161, 28162, Riddle M1.7 and Riddle W1.7LifebikeLifebike Classic + G7BatavusTorino, Genoa, Bronx, Blockbuster, Verona und Diva (2013-2019)PhylionAkkus SF03, SF06, JCEB360
Replaces Charger Phylion SSLCO84V42XH
Atnen fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 3A
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with (i.a.)
Sparta E-motion C2 Modell from 2014 Sparta E-motion C3 Modell from 2014 Sparta E-motion C5 Modell from 2014 Sparta Mojo-E Modell from 2014Sparta Pick Up E Modell from 2014
Atnen fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 3A
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with Fischer:
CITA 5.0i
CITA 6.0i
VIATOR 5.0i
EM 1966i
MONTIS 5.0i
MONTIS 6.0i
Atnen fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 3A
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with Stella:
Allegra Avenza Azzurro Durante Fiore Forte Giraldo Livorno Modena Nantes Novara Sardena Verona Vicenza
Atnen fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 3A
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with (i.a.)
Prophete Alu Trecking
Mifa
Rex
Prophete
Aldi
Lidl
Charging Time
Battery with 10Ah = about 3.5 hours
Battery with 15Ah = about 5.5 hours
Battery with 18Ah = about 6.5 hours
Atnen fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 3A
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with (i.a.)
Prophete Alu Trecking
Mifa
Rex
Prophete
Aldi
Lidl
Charging Time
Battery with 10Ah = about 3.5 hours
Battery with 15Ah = about 5.5 hours
Battery with 18Ah = about 6.5 hours
Atnen fast charger CCCV 275W (42V / 6A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: EN60335
GS (tested safety) and CB approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
275W output power (up to 6A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 3.8A (Max.)
Output
42V DC 6A
Safety Measures
Over current protection: < 6.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Dimensions:
196 x 99 x 41.5 mm
Atnen fast charger CCCV 275W (42V / 6A charging current) for 36V eBike batteries, powered by Enerpower.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: EN60335
GS (tested safety) and CB approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
275W output power (up to 6A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 3.8A (Max.)
Output
42V DC 6A
Safety Measures
Over current protection: < 6.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Dimensions:
196 x 99 x 41.5 mm