Best-Selling

Enerpower fast charger CCCV 170W (42V / 4A charging current) for 36V bicycle batteries from Decatlon Highlights Overcurrent, short-circuit and reverse polarity protection Safety standards: UL1310, EN60335 GS (tested safety) and UL tested Protection class: IP20 CCCV - Constant Current - Constant Voltage -...

ENERpower Softpack Battery 36V | Format 10S4P, RECTANGULAR | 720 Wh | Capacity 20 Ah | for Pedelecs, eBikes DIY |  INR21700-50G Important General Information We manufacture the 36V softpack batteries in Berlin. The batteries are made in plastic cell holders. Charging is possible...

The new ENERpower Luckau battery has a Molex 1625 connector and is compatible with lamps from MyTinySun & Lupine Alpha. The charging indicator shows the charging status in 5 levels as follows: Empty / 25% / 50% / 75% / Full Our batteries are...

High-quality Cycle-Life Charger for 48V (13S) Li-Ion Batteries, 110 Watt, Output Current 2A A Cycle-Life charger charges the battery particularly gently and can thus help to increase the number of possible charging cycles. With this charger, the charging termination voltage is reduced from 54.6...

ENERpower desktop charger 5S (21V) for Li-Ion batteries 18V - 18.5V | Output current 1.4A | 30W DC With the right charger, you can extend the life of your battery. Cheap chargers do not charge batteries according to CC/CV and usually not up to...

High-quality charger from Atnen (power by Enerpower) for 48V (13S) Li-ion batteries, 110W, 2A output current with 5-pin trapezoidal charging socket This charger is compatible with the Phylion / Fischer JCEB480 lithium-ion (pedelec) battery, model SF-06-S. Phylion Code: BZ2YU4JE/13S Joycube Model: JCLC109V55 Highlights /...

ENERpower charger 2S (8.4V), suitable for Li-Ion batteries 7.2V - 7.4V | Output current 3A Generally With the right charger, you can extend the life of your battery. Cheap chargers do not charge batteries according to CC/CV and usually not up to 4.2V or...

Enerpower (Atnen) fast charger CCCV 125W (41.3V / 3A charging current) for bicycle batteries 36V with XLR-3 -Powered by Enerpower Fuyuang chargers are characterized by safety and efficiency. They are certified almost worldwide and are lighter and smaller than comparable chargers with the same...

The ENERpower 4S2P is a Li-Ion battery with a DC male charging and discharging cable. The battery has a nominal voltage of 14.4V – 14.8V and is built in a cube format (approx. 85 mm / 72 mm / 46 mm) You can use...

ENERpower charger 2S (8.4V), suitable for Li-Ion batteries 7.2V - 7.4V | Output current 2A | Molex for Lupine, MyTinySun Generally With the right charger, you can extend the life of your battery. Cheap chargers do not charge batteries according to CC/CV and usually...

Atnen fast charger CCCV 85W (42V / 2A charging current) for 36V bicycle batteries - Powered by Enerpower Atnen chargers are characterized by safety and efficiency. They are certified almost worldwide, lighter and smaller than comparable chargers with the same power. Highlights Overcurrent, short...

Product information "ENERpower 3S1P 11.1V battery (12V) 5000mAh (55Wh) round plug 3x1" The 3S1P battery has a round plug (DC) that is suitable for both charging and discharging. This battery can be used as a replacement for 12V batteries (nominal voltage 10.8V-11.1V), but also...

This 2S2P Li-ion battery with open-ended cables has 7.2V-7.4V and is manufactured with a protection circuit. This battery can be used universally, for example as a replacement battery for FUTABA transmitters. Technical data Min Capacity: 10000 mAh (INR21700-50E) Nominal voltage: 7.2V - 7.4V charging...

Adapter cable DC round plug 5.5 x 2.1 mm to open ends approx. 10 cm Technical data: Application range: -40ºC to +105ºC continuous load: 5A

LG Chem MJ1 Li-Ion battery cell in 18650 format, nominal voltage 3.6, typical capacity 3450 mAh (10A) Technical data Capacity: 3450 mAh (nominal) Nominal voltage: 3.6V Charging voltage: 4.2V + 0.05V final discharge voltage: 2.50V Charging current: 1.7 A (0.5C) // Maximum 3.45A (1C)...

Tongsheng TSDZ2 36V 250W mid-drive motor + accessories + assembly instructions (German) This motor kit is without coaster brake function This motor has a push assist function (so-called 6 km/h option) - the setting is done via the display You can order the appropriate...

The new ENERpower Prenzlauerberg has a high-quality spiral cable that allows flexible placement of the battery (up to 100 cm from the consumer). A new innovation from ENERpower. Furthermore, the battery is either manufactured with a charge level indicator (100% / 75% / 50%...

ENERpower softpack battery 52V | Format 14S5P | Energy 1300 Wh | Capacity 25 Ah | for Pedelecs, eBikes DIY | with INR21700-50E. Important general information The 52V batteries in soft pack, which we manufacture in Berlin, come in two versions: square and rectangular....

Tongsheng TSDZ2B Controller 36 V, 6-Pin – for Coaster Brake Version Original replacement controller for Tongsheng TSDZ2B mid-motors with a 36 V system and coaster brake function This 36 V Tongsheng controller is suitable as a spare part for the TSDZ2B mid-motor in the...

Enerpower fast charger CCCV 125W (42V / 3A charging current) for bicycle batteries 36V from Kalkhoff with XLR-4 pins (Impulse 1.0 and 2.0) highlights overcurrent, short-circuit and reverse polarity protection Safety standards: UL1310, EN60335 GS (tested safety) and UL tested Protection class: IP20 CCCV...