Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Battery ENERpower Hailong Plus 48V 17,25Ah This Kit you can buy in 2 configuratione: 1. Free Wheel Motor (TSDZ2B) 2. Motor with coaster Break (back pedal) General Information This kit includes a Tongsheng TSWZ2 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers. Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2 Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V / 48V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Powered by Samsung INR18650-35E li-ion battery cells Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Pro Type: Bike-frame battery Li-ion battery cell: Samsung INR18650-35E Voltage (nominal): 48V Capacity: 17.25Ah Energy: 828Wh Configuration: 13S5P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30Afuse with XT90 power connector

Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2 250W + Display + Battery ENERpower Hailong Pro 48V 13.8Ah. In this offer you can choose between 2 types of Motors: 1. Freewheel 2. With coaster Break (back Pedal function)   The suitable Display and charger you can choose from our different offers on the page (Bundles) General Information This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower Hailong battery pack. Charger and Display have to be chosen from our Bundle-offers Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal functionThe kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2 Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 48V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display We have several Displays for you to choose from. Manuals you can find here Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Powered by Samsung INR18650-35E li-ion battery cells Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Pro Type: Bike-frame battery Li-ion battery cell: Samsung INR18650-35 Voltage (nominal): 48V Capacity: 13.80Ah Energy: 660Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30Afuse with XT90 power connector Charger In this set we offer 3 different chargers to choose from: 2A (110W) / 3A (165W) / 4.5A (250W)                                            

General Information This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower Hailong battery pack Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2 Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V / 48V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display Type: VLCD5 Type: VLCD6 Type: XH-18 SW102 Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Jericho Type: Bike-frame battery Li-ion battery cell: Samsung INR21700-50E / LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 15Ah Energy: 720Wh Configuration: 13S3P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.95 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30Afuse with XT90 power connector Chargers and Display have to be ordered from the bundle offers

General Information This kit includes a Tongsheng TSWZ2 48V motor kit with 250W output power along with a ENERpower Hailong battery pack Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2 Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 48V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display Type: VLCD5 Type: VLCD6 Type: XH-18 SW102 DZ41 Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Megiddo Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700-M50T Voltage (nominal): 48V Capacity: 20Ah Energy: 960Wh Configuration: 13S4P Internal resistance: < 75 mOhm Charging voltage: 54.6V End-of-Discharge Voltage: 39V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 4 kg. Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with 30Afuse with XT60 power connector Chargers and Display have to be ordered from the bundle offers