Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Jericho 36V 20Ah You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs. General Information This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display + Charger You can choose a suitable display and charger from our bundle offers Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Jericho Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700 M50T Voltage (nominal): 36V (37V) Capacity: 20Ah Energy: approx. 720Wh Configuration: 10S4P Internal resistance: < 75 mOhm Charging voltage: 42V End-of-discharge voltage: 30V Maximal charging: 5A Continuous discharge current: 20A = 720 Watt 10 Min. discharge current: 25A = 900 Watt 5 Sec. discharge current: 35A = 1260 Watt Constant load per cell: approx. 3.7A or 7A in peak load. Weight: approx. 3.25 Kg                                          

Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Megiddo 36V 25Ah You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs. General Information This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2B has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display + Charger You can choose a suitable display and charger from our bundle offers Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Megiddo Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700 M50T Voltage (nominal): 36V (37V) Capacity: 25Ah Energy: approx. 900Wh Configuration: 10S5P Internal resistance: < 75 mOhm Charging voltage: 42V End-of-discharge voltage: 30V Maximal charging: 5A Continuous discharge current: 20A = 720 Watt 10 Min. discharge current: 25A = 900 Watt 5 Sec. discharge current: 35A = 1260 Watt Constant load per cell: approx. 3.7A or 7A in peak load. Weight: approx. 4 Kg                                          

Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W + Battery ENERpower Hailong Masada 36V 15Ah with side realese You can choose weather you need the free wheeling version, or the one with coaster break. You can choose the display and the suitable charger for your needs. General Information This kit includes a Tongsheng TSDZ2B 36V motor kit with 250W output power along with a ENERpower Hailong battery pack. The suitable Display as well as a charger you can choose from our additional offers on the product site Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and display. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The offered mid-engine does not have a back pedal function.The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display + Charger You can choose a suitable display and charger from our bundle offers Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Powered by Samsung INR18650-35E li-ion battery cells Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Masada Type: Bike-frame battery Li-ion battery cell: LG Chem INR21700 M50T Voltage (nominal): 36V (37V) Capacity: 15Ah Energy: approx. 540Wh Configuration: 10S4P Internal resistance: < 75 mOhm Charging voltage: 42V End-of-discharge voltage: 30V Maximal charging: 5A Continuous discharge current: 20A = 720 Watt 10 Min. discharge current: 25A = 900 Watt 5 Sec. discharge current: 35A = 1260 Watt Constant load per cell: approx. 3.7A or 7A in peak load. Weight: approx. 3.25 Kg                                          

Motor Kit, DIY Conversion Kit | Motor Tongsheng TSDZ2B 250W with and without coaster break + Battery ENERpower Hailong Pro 36V 16Ah (MH1) The suitable Display and Charger you can configurate from our Bundle-offers and are add-on products (must be paid in addition) You can choose between Motor with and without coaster break General Information This kit includes a Tongsheng 36V motor kit with 250W output power along with a ENERpower Hailong battery pack and one of three different Modiary output 2A, 3A and 4A chargers. Tongsheng motors are known for their easy and uncomplicated assembly. The controller is already integrated in the motor and the kit includes all the necessary accessories such as cable, speed sensor and a Tool. This engine meets the requirements of the StVO (German traffic regulations) and does not have to be approved. The maximum speed 25 km/h is preset. The TSDZ2 has an integrated torque sensor and controls the level of support. The kit is suitable for all wheel sizes and widths from 8 to 28 inches and for bicycles with a bottom bracket shell with the dimensions: case width 67 mm to 69 mm; inside diameter min. 33.5 mm to max. 35.5 mm. These are the dimensions of the most commonly used BSA bottom bracket. Technical Details Motor Manufacturer:Tongsheng (China) Model: TSDZ2B Motor tyep: mid-motor Wheel diameter: 16' - 28' Energy: 250W - 350W Voltage: 36V Torque: 50N.m - 80N.m Level of support: 36% ~ 300% Maximal speed: 25Km/h Weight: 3.3 Kg. Display You have 5 different Displays to choose from Battery - Highlights High quality assembling – Made in Germany Assembling Just-In-Time BMS with an integrated balancer BMS with protection against overcharge, deep discharge, over discharge (temperature control) Powered by Samsung INR18650-35E li-ion battery cells Direct from the manufacturer Rechargeable – even after 300 charging cycles 80% of the original capacity is still available. No memory-effect – charge the battery whenever you want Environment friendly according to EU-Guidelines 2002/95/EG (RoHS) Battery - Technical Details Manufacturer: ENERpower (Germany) Case: Hailong Pro Type: Bike-frame battery Li-ion Cell: LG Chem INR18650-MH1 Voltage (nominal): 36V (37V) Capacity: 16Ah Energy: 580Wh Configuration: 10S5P Internal resistance: < 75 mOhm Charge Voltage: 42V End-of-Discharge Voltage: 30V BMS Continuous Discharge Current: 22A BMS 10 Min. Discharge Current: 25A BMS 5 Seconds Discharge Current: 30A Safety Fuse: 30A Weight: approx. 2.75 kg. Length: ca. 370 mm Width: 90 mm High: 85-90 mm Charge: DC round plug 5.5 mm/2.5 mm Discharge: Cable with fuse 30A with XT90 power connector (counterpart is included in the scope of delivery) Charger In this set we offer 4 different chargers to choose from with 2A, 3A and 4A output Another charger is a life-cycle Charger (41.3V 3A)