ENERpower Softpack battery 48V in format 13S2P | 480 Wh | capacity 10 Ah | for Pedelecs, eBikes DIY | with LG Chem INR21700 50M.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: LG Chem INR21700-50M
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 10Ah
Power: approx. 480 Wh
Configuration: 13S2P (set up: 13×2)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 20A = 950 watts
5 seconds discharge current: 30A = 1440 watts
Weight: 2.15 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 305 mm
Width: 46 mm – 56 mm
Height: 74 mm
ENERpower Softpack battery 48V in format 13S3P | 576 Wh | capacity 12 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-40T.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors with 20A BMS
Up to 950 Watt
Compatible with 48V motors with 30A BMS
Up to 1440 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-40T
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 15 Ah
Power: approx. 720 Wh
Configuration: 13S3P (set up: 13×3)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Weight: 3 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson
Dimensions
Length: 305 mm
Width: 72 mm – 92 mm
Height: 72 mm
ENERpower Softpack battery 36V, format 13S2P rectangular | for Pedelecs, eBikes DIY | Super Drain
Important General Information
We manufacture a range of Super Drain batteries in softpacks in Berlin. These batteries are small in size and weight and are made with high-current INR21700-40T or INR21700-50S battery cells. The Smart BMS (Battery Management System) with a continuous load capacity of 30A is always mounted on the longest side of the battery, resulting in an approximately 20mm thicker section at that point.
This battery is designed for users who typically complete short and demanding distances, as well as for situations where overall weight plays a crucial role (off-road, inclines, etc.).
The softpack batteries are constructed with FR4 insulation, which is a flame-resistant and fire-retardant composite material consisting of epoxy resin and fiberglass fabric. FR-4 is commonly used as an electrically non-conductive substrate in printed circuit boards.
Additionally, this battery features an LED status indicator located on the top side of the battery. The indicator displays the battery's charge level in the following steps: "Empty," "25%," "50%," "75%," and "Full."
Compatible with 48V motors
Up to 1440 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: INR21700-40T, or INR21700-50S
Voltage (nominal): 48V (13S)
Capacity: 8Ah / 10 Ah
Power: approx. 385 Wh / 480 Wh
Configuration: 13S2P (set up: 13×2)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
Charging Current (Max): 8A
Weight: 2 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60
Dimensions
Length: 305 mm
Width: 50 mm – 70 mm
Height: 72 mm
ENERpower Softpack battery 48V in format 13S3P | 720 Wh | capacity 15 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 15 Ah
Power: approx. 720 Wh
Configuration: 13S3P (set up: 13×3)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 20A = 950 watts
5 seconds discharge current: 30A = 1440 watts
Weight: 3 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: ca. 305 mm
Width: ca. 69 mm – 79 mm
Height: ca. 75 mm
ENERpower Softpack battery 48V in format 13S3P | 720 Wh | capacity 15 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 6 cells are used on the longest side (appr. 140 mm).
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 15 Ah
Power: approx. 720 Wh
Configuration: 13S3P (set up: 6×5)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 20A = 950 watts
5 seconds discharge current: 30A = 1440 watts
Weight: 3 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: appr. 162 mm
Width: appr. 138 mm – 148 mm
Height: 72 mm
ENERpower Softpack battery 48V in format 13S4P | 960 Wh | capacity 20 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 20 Ah
Power: approx. 960 Wh
Configuration: 13S4P (set up: 13×4)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 20A = 950 watts
5 seconds discharge current: 30A = 1440 watts
Weight: 3.75 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
Length: ca. 305 mm
Width: ca. 92 mm – 102 mm
Height: ca. 75 mm
ENERpower Softpack battery 48V in format 13S4P | 960 Wh | capacity 20 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 20 Ah
Power: approx. 960 Wh
Configuration: 13S4P (set up: 13×4)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: around 3.75 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
Length: 300 mm
Width: 92 mm – 110 mm
Height: 74 mm
ENERpower Softpack battery 48V in format 13S5P | 1200 Wh | capacity 25 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 25 Ah
Power: approx. 1200 Wh
Configuration: 13S5P (set up: 13×5)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 20A = 950 watts
5 seconds discharge current: 30A = 1440 watts
Weight: 4.85 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 286 mm
Width: 110 mm – 120 mm
Height: 72 mm
ENERpower Softpack battery 48V in format 13S5P | 1200 Wh | capacity 25 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 25 Ah
Power: approx. 1200 Wh
Configuration: 13S5P (set up: 10×6)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: 4.65 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 300 mm
Width: 110 mm – 125 mm
Height: 72 mm
ENERpower Softpack battery 48V in format 13S6P | 1440 Wh | capacity 30 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: LG Chem INR21700-50M
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 30 Ah
Power: approx. 1440 Wh
Configuration: 13S6P (set up: 13×6)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: 6.65 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 286 mm
Width: 132 mm – 145 mm
Height: 72 mm
ENERpower Softpack battery 48V in format 13S7P | 1680 Wh | capacity 35 Ah | for Pedelecs, eBikes DIY | with INR21700-M50T
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: INR21700-M50T
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 35 Ah
Power: approx. 1680 Wh
Configuration: 13S7P (set up: 13×7)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: 6.95 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 305 mm
Width: 165 mm – 175 mm
Height: 74 mm
ENERpower Softpack battery 48V in format 13S8P | 1920 Wh | capacity 40 Ah | for Pedelecs, eBikes DIY | with INR21700-M50T
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: LG Chem INR21700-M50T
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 40 Ah
Power: approx. 1920 Wh
Configuration: 13S8P (set up: 13×8)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 30A = 1440 watts
5 seconds discharge current: 40A = 1920 watts
Weight: 7.55 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90
Dimensions
Length: 305 mm
Width: 185mm – 195 mm
Height: 74 mm
ENERpower Softpack battery 48V in format 13S9P | 2160 Wh | capacity 45 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1500 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung SDI INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 45 Ah
Power: approx. 2160 Wh
Configuration: 13S9P (set up: 13×9)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 40A = 1920 watts
Weight: 8.55 Kg.
Charge connector (connects to the charger): XLR-3 (3 pins)
Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson
Dimensions
Length: ca. 300 mm
Width: ca. 205mm – 220 mm
Height: ca. 74 mm
ENERpower Softpack battery 48V in format 13S10P | 2400Wh | capacity 50 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging and discharging via a discharge cable with XT90 connector (male). In This battery is no fuse integrated.
In the square version, 10 cells are used on the longest side (200 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (260 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1440 Watt / 1800 Watt / 2000 Watt / 2400 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
Smart BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 50 Ah
Power: approx. 2400 Wh
Configuration: 13S10P (set up: 13×10)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 50A = 2400 watts
5 seconds discharge current: 60A = 2880 watts
Weight: 9.35 Kg.
Charge & Discharge connector (connects to the motor): XT-90
Dimensions
Length: 300 mm
Width: 230 mm – 250 mm
Height: 70 mm
ENERpower Softpack battery 48V in format 13S12P | 2880Wh | capacity 60 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E.
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging and discharging via a discharge cable with XT90 connector (male). In This battery is no fuse integrated.
In the square version, 10 cells are used on the longest side (200 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (260 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt / 1200 Watt / 1440 Watt / 1800 Watt / 2000 Watt / 2400 Watt
Highlights
High-quality production - Made in Germany
Production Just-In-Time
Smart BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
Li-ion Cell: Samsung INR21700-50E
Voltage (nominal): 48V (46.8V - 48.1V)
Capacity: 60 Ah
Power: approx. 2880 Wh
Configuration: 13S12P (set up: 13×12)
Internal resistance: < 75 mOhm
Charge voltage: 54.6V
End-of-discharge voltage: 39V
Continuous discharge Current: 50A = 2400 watts
5 seconds discharge current: 60A = 2880 watts
Weight: 11.30 Kg.
Charge & Discharge connector (connects to the motor): XT-90
Dimensions
Length: 300 mm
Width: 300 mm
Height: 70 mm
€1,175.00*
We Have a New Website!
or
This website uses cookies to ensure the best experience possible. More information...