Li-Ion Battery Packs

  Important General Information This 24V LiFePo4 softpack battery is manufactured with 32600 LiFePo4 battery cells.The battery cells are built into plastic cell holders and equipped with a 25A BMS. Charging is done with a coiled cable (extendable from 20 – 100 cm) with...

ENERpower Softpack Battery 24V | Format 7S3P | Energy 375Wh | Capacity 15Ah | for Pedelecs, eBikes DIY, Machines, eScooters etc. | with Samsung 50G Important general information This 24V softpack battery is in 7S format (25.2V-25.9V) and uses Samsung SDI INR21700-50G battery cells....

ENERpower LiFePO4 battery 12V (12.8V) 4S1P for operation with small 12V motors with 2Ah Highlights BMS with protection against overcharging, deep discharging, and over-discharging (temperature monitoring) Direct from the manufacturer Rechargeable – After 1800 complete charging cycles, it still retains 80% of its original...

Enerpower industrial battery with protection circuit | Voltage 3.6V-3.7V | Capacity 3200 mAh This ENERpower comes with a JST 2.0 PH / 2P connector. Highlights Featuring a high-quality PCB (protection circuit) of 3A Rechargeable up to 500 times Energy storage capacity for a long...

ENERpower LiFePO4 battery 12V (12.8V) 4S1P for operation with small 12V motors with 1.8Ah Highlights BMS with protection against overcharging, deep discharging, and over-discharging (temperature monitoring) Direct from the manufacturer Rechargeable – After 1800 complete charging cycles, it still retains 80% of its original...

Enercig Li-ion rechargeable 14430 650 mah (2C) battery cell with solder lug for toothbrush Oral-B Pro 1000 (Type 3756) Please note: This battery is only installed in this model from 2018 onwards. Before that, Braun, the manufacturer of Oral-B, used Ni-Mh batteries. Technical data...

Enercig Li-ion rechargeable 14430 650 mAh (2C) battery cell with solder lug for toothbrush Philips Sonicare ProtectiveClean 6100 model numbers: e.g. HX6877, HX6871 The Enercig 14430 battery cell is a small Li-Ion battery cell for use in small battery packs Technical data Capacity: 650...

Replacement battery in 1S2P format | Voltage 3.6V-3.7V | Capacity 6500mAh | with Samsung 35E. Open-end cable approx. 10cm long Highlights With a high quality PCB (protection circuit) of 3A Rechargeable up to 500 times Energy storage capacity for a long runtime After 300...

Enerpower industrial battery with protection circuit | Voltage 3.6V-3.7V | Capacity 3200 mAh | NTC 10kOhm This ENERpower comes with three wires as output. The blue wire is NTC 10k ohm and does not need to be connected. Highlights With a high quality PCB...

The new ENERpower Johannisthal battery has a Molex 1625 connector and is compatible with lamps from MyTinySun and Lupine Alpha. The battery has a LED version with a charging indicator that shows the charging status in 5 levels as follows: Empty / 25% /...

ENERpower battery LiFePO4 12V (12.8V) 75.60Ah (960Wh) - replaces lead batteries 12V, lead-gel batteries 12V Important general information Our range of LiFePO4 batteries are ideal as a lightweight and long-lasting replacement for lead-acid batteries. With a significantly lighter weight, robust voltage level and long...

ENERpower battery LiFePO4 12V (12.8V) 28h (320Wh) - replaces lead batteries 12V, lead-gel batteries 12V Important general information Our range of LiFePO4 batteries are ideal as a lightweight and long-lasting replacement for lead-acid batteries. With a significantly lighter weight, robust voltage level and long...

The ENERpower 4S1P is a Li-Ion battery with a charging and discharging cable with open ends. The battery has a nominal voltage of 14.4V – 14.8V (approx. 72 mm / 42 mm / 72 mm) Highlights 5000 mAh (approx. 72 Wh) With a high-quality...

The 3S1P battery has a male round plug (DC) that is suitable for both charging and discharging. This battery can be used as a replacement for 12V batteries (nominal voltage 10.8V-11.1V), but also as a replacement for 10.8V-11.1V batteries for LED lamps highlights 5000...

This battery, manufactured with 21700 battery cells, is 2 x 2 in construction and comes with open-ended labels highlights With a high quality PCB (protection circuit) of 5A Rechargeable up to 500 times With Molex connector energy storage capacity for a long running time...

The 3S2P battery has a Molex connector type 1625-2R1, which is suitable for both charging and discharging. This battery can be used as a replacement for 12V batteries (nominal voltage 10.8V-11.1V), but also as a replacement for 10.8V-11.1V batteries for LED lamps highlights 10000mAh...

This 2S2P Li-ion battery with XH-18 connector has a voltage of 7.2V-7.4V and is manufactured with a protection circuit. We developed this battery in collaboration with the MuPiBox development team. €5 from each battery sold goes as a donation to MuPiBox: https://mupibox.de/ Technical data...

The 3S2P battery has open-ended cables suitable for both charging and discharging. This battery can be used as a replacement for 12V batteries (nominal voltage 10.8V-11.1V). Highlights 6800mAh (75 Wh) With a high-quality PCB (protection circuit) rated for 5A – 6A Suitable for consumers...

ENERpower Li-Ion battery in 6S1P format | Voltage 21.6V-22.2V | Capacity | 3.4Ah | Protection circuit 5A | JST 2.54HX Highlights High-quality manufacturing – Made in Germany Production upon receipt of order or payment PCM with an integrated passive balancer (min. 4.1V per battery...

This 2S2P Li-ion battery with JST XHP-3 connector has a voltage of 7.2V-7.4V and is manufactured with a protection circuit. This battery can be used universally, for example as a replacement battery for Futaba transmitters. Technical data Minimum capacity: 6800 mAh Nominal voltage: 7.2V...