Battery Packs & Parts
-
Enerpower industrial battery with protection circuit | Voltage 3.6V-3.7V | Capacity 3200 mAh | NTC 100k Ohm This ENERpower is an industrial battery that we can manufacture with 4 different connectors: 1. Molex 51021 2. Molex 5264 3. JST XH 4th JST PHR highlights...
- €17,90
- €17,90
- Unit price
- per
-
The new ENERpower Johannisthal battery has a Molex 1625 connector and is compatible with lamps from MyTinySun and Lupine Alpha. The battery has a LED version with a charging indicator that shows the charging status in 5 levels as follows: Empty / 25% /...
- €72,99
- €72,99
- Unit price
- per
-
Important general information This battery in the Gath housing is a luggage carrier battery that can be manufactured as either a 36V (10S) or a 48V (13S) battery. The housing has space for 60 Li-Ion 18650 cells. The maximum capacity for 36V is 10S6P...
- €89,99
- €89,99
- Unit price
- per
-
ENERpower EP-MH1 Li-Ion battery 3.6V 3200 mAh button-top without contactor circuit Generally The battery cells offered were designed for devices that require a pronounced positive pole (nuppel) for use, such as flashlights, toys, measuring devices, etc. The battery cells do not have a protective...
- €8,40
- €8,40
- Unit price
- per
-
The new ENERpower Charlottenburg has a high-quality spiral cable that allows flexible placement of the battery (up to 100 cm from the consumer). We manufacture this battery in 2 versions: Basic - without charge level indicator Plus - with charge level indicator (100% /...
- €29,50
- €29,50
- Unit price
- per
-
general information Do you have a charger for your Pedelec with the wrong connector? We at Enerpower have the solution for you! With this adapter cable you can convert your charger with an XLR-3 pin connector to an XLR-4 charger. The pin assignment corresponds...
- €7,99
- €7,99
- Unit price
- per
-
general information Do you have a charger for your Pedelec with the wrong connector? We at Enerpower have the solution for you! With this adapter cable you can convert your charger with an XLR 3-pin connector to an RCA (chinch) charger. The pin assignment...
- €6,99
- €6,99
- Unit price
- per
-
This Reention Hailong Hebron case is a case for the frame. The case comes with plastic cell holders with space for 70 21700 Li-Ion cells. Charging is done via a DC socket. The LED display is suitable for 13S batteries. Possible configurations : 13S1P...
- €46,99
- €46,99
- Unit price
- per
-
The 3S1P battery has a male round plug (DC) that is suitable for both charging and discharging. This battery can be used as a replacement for 12V batteries (nominal voltage 10.8V-11.1V), but also as a replacement for 10.8V-11.1V batteries for LED lamps highlights 5000...
- €51,99
- €51,99
- Unit price
- per
-
The 3S1P battery has a Molex 5264-2P connector. highlights 5000 mAh (approx. 55 Wh) With a high-quality PCB (protection circuit) of 5A – 6A Suitable for consumers up to 55 watts Rechargeable up to 500 times With Molex 5264-2P energy storage capacity for a...
- €41,99
- €41,99
- Unit price
- per
-
This Reention Hailong Hebron case is a case for the frame. The case comes with plastic cell holders with space for 70 21700 Li-Ion cells. Charging is done via a DC charging socket. The LED display is suitable for 10S batteries. Possible configurations :...
- €46,99
- €46,99
- Unit price
- per
-
ENERpower battery LiFePO4 12V (12.8V) 4S1P for operation with small engines 12V with 1.6Ah highlights High-quality manufacturing in Germany BMS with an integrated passive balancer BMS with protection against overcharging, deep discharge, over-discharge (temperature monitoring) Directly from the manufacturer Rechargeable – still 80% of...
- €21,00
- €21,00
- Unit price
- per
-
The 3S2P battery has a Molex connector type 1625-2R1, which is suitable for both charging and discharging. This battery can be used as a replacement for 12V batteries (nominal voltage 10.8V-11.1V), but also as a replacement for 10.8V-11.1V batteries for LED lamps highlights 10000mAh...
- €61,00
- €61,00
- Unit price
- per
-
Daly PCM (protection circuit) for LiFePo4 batteries 8S (24V) 30A continuous Further technical details can be found in the available downloads on the product page
- €22,00
- €22,00
- Unit price
- per
-
Daly protection circuit PCM 15S (48V) LiFePo4 20A Passive Balancer Further technical details can be found in the available downloads on the product page
- €24,00
- €24,00
- Unit price
- per
-
Daly PCM (protection circuit) for LiFePo4 batteries 12S (36V) 20A continuous Further technical details can be found in the available downloads on the product page Dimensions (L x W x H): With passive balancer
- €22,00
- €22,00
- Unit price
- per
-
Daly PCM (protection circuit) for LiFePo4 batteries 8S (24V) 15A continuous Further technical details can be found in the available downloads on the product page
- €14,00
- €14,00
- Unit price
- per
-
Main features BMS Daly 7S 30A: Continuous discharge current: 30A charging voltage: 29.4V Charging current (max.): 15A Passive balancer: Yes (approx. 4.18V) Dimensions (mm): 85 x 57 x 13 For further technical data, see Available Downloads on this product page (English) You will also...
- €20,00
- €20,00
- Unit price
- per
-
Daly PCM (protection circuit) for LiFePo4 batteries 4S (12V) 50A continuous Further technical details can be found in the available downloads on the product page Dimensions (L x W x H): 80 x 61 x 12 mm
- €19,90
€0,00- €19,90
- Unit price
- per
Save €-19,90 -
Daly PCM (protection circuit) for LiFePo4 batteries 4S (12V) 40A continuous Further technical details can be found in the available downloads on the product page Dimensions (L x W x H): 80 x 61 x 9 mm
- €18,30
€0,00- €18,30
- Unit price
- per
Save €-18,30