Battery Packs & Parts

general information Do you have a charger for your e-bike with the wrong connector? We at Enerpower have the solution for you! This adapter cable allows you to convert your charger with an XT-60 connector to an XLR 3-pin charger. The pinout is compatible...

ENERpower LiFePO4 battery 12V (12.8V) 4S1P for operation with small 12V motors with 1.8Ah Highlights BMS with protection against overcharging, deep discharging, and over-discharging (temperature monitoring) Direct from the manufacturer Rechargeable – After 1800 complete charging cycles, it still retains 80% of its original...

Enercig Li-ion rechargeable 14430 650 mah (2C) battery cell with solder lug for toothbrush Oral-B Pro 1000 (Type 3756) Please note: This battery is only installed in this model from 2018 onwards. Before that, Braun, the manufacturer of Oral-B, used Ni-Mh batteries. Technical data...

Enercig Li-ion rechargeable 14430 650 mAh (2C) battery cell with solder lug for toothbrush Philips Sonicare ProtectiveClean 6100 model numbers: e.g. HX6877, HX6871 The Enercig 14430 battery cell is a small Li-Ion battery cell for use in small battery packs Technical data Capacity: 650...

Replacement battery in 1S2P format | Voltage 3.6V-3.7V | Capacity 6500mAh | with Samsung 35E. Open-end cable approx. 10cm long Highlights With a high quality PCB (protection circuit) of 3A Rechargeable up to 500 times Energy storage capacity for a long runtime After 300...

Enerpower industrial battery with protection circuit | Voltage 3.6V-3.7V | Capacity 3200 mAh | NTC 10kOhm This ENERpower comes with three wires as output. The blue wire is NTC 10k ohm and does not need to be connected. Highlights With a high quality PCB...

The new ENERpower Johannisthal battery has a Molex 1625 connector and is compatible with lamps from MyTinySun and Lupine Alpha. The battery has a LED version with a charging indicator that shows the charging status in 5 levels as follows: Empty / 25% /...

ENERpower universal extension cable from DC (round plug) to crocodiles 500 mm With this adapter cable you can easily charge batteries with open contacts (such as LiFePo4) Length: 500 mm Red: Plus Black: Minus

Plastic spacers for 65 battery cells with 18 mm diameter such as 18650, 18500 etc. This design is often used in Hailong cases to produce either 13S5P batteries or 10S6P batteries Total length: 305 mm / Width: 70 - 85 mm scope of delivery...

Plastic spacer for 2 battery cells with 18 mm diameter such as 18650, 18500 etc. Each cell holder has space for 2 cells (you need at least 2 of them). Length: approx. 40 mm Width: approx. 20 mm Depth: approx. 8 mm The spacers...

Enerpower Reention DC charging socket for Poly Case Compatible with: DP-4C-21700 / DP-5C-21700 / DP-5C / DP-6 / DP-6C / DP-7 / DP-9 / DP-9C

This Reention Hailong Babylon case is a case for the frame. The case comes with plastic cell holders with space for 91 18650 Li-Ion cells. Charging is done via a DC socket (round plug). The LED display is suitable for 10S batteries. Mount: 5-pins...

ENERpower battery LiFePO4 12V (12.8V) 75.60Ah (960Wh) - replaces lead batteries 12V, lead-gel batteries 12V Important general information Our range of LiFePO4 batteries are ideal as a lightweight and long-lasting replacement for lead-acid batteries. With a significantly lighter weight, robust voltage level and long...

ENERpower battery LiFePO4 12V (12.8V) 28h (320Wh) - replaces lead batteries 12V, lead-gel batteries 12V Important general information Our range of LiFePO4 batteries are ideal as a lightweight and long-lasting replacement for lead-acid batteries. With a significantly lighter weight, robust voltage level and long...

The ENERpower 4S1P is a Li-Ion battery with a charging and discharging cable with open ends. The battery has a nominal voltage of 14.4V – 14.8V (approx. 72 mm / 42 mm / 72 mm) Highlights 5000 mAh (approx. 72 Wh) With a high-quality...

The 3S1P battery has a male round plug (DC) that is suitable for both charging and discharging. This battery can be used as a replacement for 12V batteries (nominal voltage 10.8V-11.1V), but also as a replacement for 10.8V-11.1V batteries for LED lamps highlights 5000...

This battery, manufactured with 21700 battery cells, is 2 x 2 in construction and comes with open-ended labels highlights With a high quality PCB (protection circuit) of 5A Rechargeable up to 500 times With Molex connector energy storage capacity for a long running time...

The 3S2P battery has a Molex connector type 1625-2R1, which is suitable for both charging and discharging. This battery can be used as a replacement for 12V batteries (nominal voltage 10.8V-11.1V), but also as a replacement for 10.8V-11.1V batteries for LED lamps highlights 10000mAh...

Daly PCM (protection circuit) for LiFePo4 batteries 8S (24V) 30A continuous Further technical details can be found in the available downloads on the product page  

Balancer Cable JST-XH 2.54mm 45 cm Silicone for 4S (5 Pins)