HaiLong Reention Jaffa Bike-Frame Battery case empty 14S 52V
From
€25.99*
Prod. no.:
11713
This Hailong Reention from Type Jaffa case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 70 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 14S batteries.
possible configurations: 14S1P-14S5P
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 113 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
HaiLong Reention Tyros Bike-Frame Battery case empty 14S 52V
From
€25.99*
Prod. no.:
11887
This Hailong Reention from Type Tyros case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 56 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 14S batteries.
possible configurations: 14S1P-14S4P
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 96 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Tip
Bracket for Hailong I 36V / 48V
€22.00*
Prod. no.:
107273
Bracket for Hailong I (side release) for 36V / 48VThis bracket can be empty or ordered with connectors:1. XT602. XT903. Anderson PowerPole
Cavity for 52 cells 18 mm Diameter Type Hailong (350 x 54 mm)
From
€5.56*
Prod. no.:
11005
Plastic cavity for 52 battery cells with 18 mm diameters such as 18650, or 18500 etc.
This cavity is used at battery cases from type Hailong for batteries in following configurations:
13S4P / 10S5P
Length: About 320 up to 350 mm
Width: About 54mm
Scope of Delivery
2 x cavities for 52 18650 cells (Set)
Enerpower Gath luggage rack Case 10S6P with luggage rack
€89.99*
Prod. no.:
11708
Important general informationThis battery in the Gath housing is a luggage rack battery that can be manufactured as a 36V (10S) as well as a 48V (13S) battery. There is space for 52 Li-Ion 18650 cells in the housing. The maximum assignment for 36V is 10S6P and for 48V 13S4P.The case is approx. 438 mm long, 156 mm wide and 67 mm high.The battery is charged with a charger with a DC circular connector.The on / off switch is also located on the battery and there is no charge indicator in this housing.The battery case comes with cell holders and a mounting plate
This case arrives with a back light (operated with batteries), as well as with Charging indicator (Fuel gauge)Scope of delivery:1 x empty Enerpower Nablus 10S5P housing1 x luggage rack FME0006
Enerpower Gath luggage rack Case 10S6P with luggage rack
€89.99*
Prod. no.:
11709
Important general informationThis battery in the Gath housing is a luggage rack battery that can be manufactured as a 36V (10S) as well as a 48V (13S) battery. There is space for 52 Li-Ion 18650 cells in the housing. The maximum assignment for 36V is 10S6P and for 48V 13S4P.The case is approx. 438 mm long, 156 mm wide and 67 mm high.The battery is charged with a charger with a DC circular connector.The on / off switch is also located on the battery and there is no charge indicator in this housing.The battery case comes with cell holders and a mounting plate
This case arrives with a back light (operated with batteries), as well as with Charging indicator (Fuel gauge)Scope of delivery:1 x empty Enerpower Nablus 10S5P housing1 x luggage rack FME0006
Enerpower Nablus luggage rack Case 13S4P with luggage rack
€79.99*
Prod. no.:
90209061
Important general informationThis battery in the Nablus housing is a luggage rack battery that can be manufactured as a 36V (10S) as well as a 48V (13S) battery. There is space for 52 Li-Ion 18650 cells in the housing. The maximum assignment for 36V is 10S5P and for 48V 13S4P.The case is approx. 438 mm long, 156 mm wide and 67 mm high.The battery is charged with a charger with a DC circular connector.The on / off switch is also located on the battery and there is no charge indicator in this housing.The battery case comes with cell holders and a mounting plateScope of delivery:1 x empty Enerpower Nablus 13S4P housing1 x luggage rack FME0006
Enerpower Reention 21700 Bike-Frame Battery empty Polly-DP-4C Jericho (10S) 40 Cells
From
€29.39*
Prod. no.:
10611
This Hailong Reention from Type Jericho case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 40 21700 Li-ion battery cells. Charging is via a Zenith 3-Pins connector. The LED display is suitable for 13S batteries.
possible configurations: 10S1P-10S4P
Dimensions
Length: approx. 368 mm
Width: 95 mm
Height: 103 mm
ATTENTION:
1. this is only the empty housing for Hailong Jericho The self-mounting bracket of the frame battery or Downtube battery.
2. In order to charge this case you would require an adapter XLR-3 to Zenith 3-Pins connector
Enerpower Reention 21700 Bike-Frame Battery empty Polly-DP-4C Jericho (13S) 40 Cells
From
€29.39*
Prod. no.:
10610
This Hailong Reention from Type Jericho case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 40 21700 Li-ion battery cells. Charging is via Zenith special Charging socket. The LED display is suitable for 13S batteries.
possible configurations: 13S1P-13S3P
Dimensions
Length: approx. 368 mm
Width: 95 mm
Height: 103 mm
ATTENTION:
1. this is only the empty housing for Hailong Jericho The self-mounting bracket of the frame battery or Downtube battery.
2. Please watch out, that for this case you require a special adapter (XLR-3 to Zenith), in order to charge your battery
Enerpower Reention 21700 Bike-Frame Battery empty Polly-DP-7 Hebron (10S) 70 Cells
From
€35.24*
Prod. no.:
11267
This Hailong Reention from Type Hebron case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 70 21700 Li-ion battery cells.
possible configurations: 10S1P-10S7P
Charging socket: DC 5.5 x 2.1 mm
Bracket: 5-Pins
Dimensions
Length: approx. 368 mm
Width: 95 mm
Height: 156 mm
ATTENTION:
1. this is only the empty housing for Hailong Jericho The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention 21700 Bike-Frame Battery empty Polly-DP-7 Hebron (13S) 70 Cells
From
€35.24*
Prod. no.:
11706
This Hailong Reention from Type Hebron case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 70 21700 Li-ion battery cells.
possible configurations: 13S1P-10S5P
Charging socket: DC 5.5 x 2.1 mm
Bracket: 5-Pins
Dimensions
Length: approx. 368 mm
Width: 95 mm
Height: 156 mm
ATTENTION:
1. this is only the empty housing for Hailong Jericho The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention Bike-Frame Battery empty Polly-DP-5C Akkon (10S) 52 Cells
From
€32.24*
Prod. no.:
10666
This Hailong Reention from Type Akkon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 52 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 13S batteries.
possible configurations: 10S1P-10S5P
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 96 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention Bike-Frame Battery empty Polly-DP-5C Akkon (13S) 52 Cells
From
€32.24*
Prod. no.:
11712
This Hailong Reention from Type Akkon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 52 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 13S batteries.
possible configurations: 13S1P-13S4P
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 96 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention Bike-Frame Battery empty Polly-DP-5C Akkon 52 Cells - Spare part
€12.50*
Prod. no.:
10998
This part of the Hailong Akkon Reention Case, is an eBike case for the frames. The Case is made of 2 plastic parts and can be used as a spare part for a damaged one.
.
Dimensions Length: approx. 368 mm
Width: 90 mm
Height: 96 mm
ATTENTION: it is handled by a small house without metal parts, locks, green halters, etc.
Enerpower Reention Bike-Frame Battery empty Polly-DP-5C Meggido (13S) 52 Cells
From
€31.49*
Prod. no.:
10769
This Hailong Reention from Type Megiddo case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 52 21700 Li-ion battery cells. Charging is via Zenith 3-Pins connector. The LED display is suitable for 13S batteries.
possible configurations: 13S1P-13S4P
Holder: 5-Pins with no place for controller
Dimensions
Length: approx. 368 mm
Width: 94,8 mm
Height: 123 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention Bike-Frame Battery empty Polly-DP-5C Megiddo (10S) 52 Cells
From
€35.48*
Prod. no.:
107681
This Hailong Reention from Type Megiddo case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 52 21700 Li-ion battery cells. Charging is via Zenith 3-Pins socket. The LED display is suitable for 10S batteries.
possible configurations: 10S1P-10S5P
Holder: 5-pins without a place for controller
Dimensions
Length: approx. 368 mm
Width: 94,8 mm
Height: 123 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Variants from €31.49*
Enerpower Reention Bike-Frame Battery empty Polly-DP-6C Gezer (10S) 65 Cells
From
€29.24*
Prod. no.:
10669
This Hailong Reention from Type Akkon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 65 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 10S batteries.
possible configurations: 10S1P-10S6P
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 112 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention Bike-Frame Battery empty Polly-DP-6C Gezzer (13S) 65 Cells
From
€29.24*
Prod. no.:
10668
This Hailong Reention from Type Gezer case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 65 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 13S batteries.
possible configurations: 13S1P-13S5P
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 112 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention Bike-Frame Battery empty Polly-DP-9 Babylon (10S) 91 Cells
From
€29.99*
Prod. no.:
10738
This Hailong Reention from Type Babylon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 91 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 10S batteries.
possible configurations: 10S1P-10S9P
Holder: 5-pins without a place for controller
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 140 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention Bike-Frame Battery empty Polly-DP-9 Babylon (10S) 91 Cells
From
€29.99*
Prod. no.:
11710
This Hailong Reention from Type Babylon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 91 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 10S batteries.
possible configurations: 10S1P-10S9P
Holder: 5-pins without a place for controller
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 140 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention Bike-Frame Battery empty Polly-DP-9 Babylon (13S) 91 Cells
From
€29.99*
Prod. no.:
11707
This Hailong Reention from Type Babylon case is a case to be mounted on the bike’s frame. The case comes with plastic cell brackets (cavity) with space for 91 18650 Li-ion battery cells. Charging is via a DC jack (round plug). The LED display is suitable for 13S batteries.
possible configurations: 13S1P-13S7P
Holder: 5-Pins with no place for controller
Dimensions
Length: approx. 368 mm
Width: 90 mm
Height: 140 mm
ATTENTION: this is only the empty housing for Hailong Plus The self-mounting bracket of the frame battery or Downtube battery.
Enerpower Reention DC Charging Socket for Poly Case
€1.99*
Prod. no.:
11002
Enerpower Reention DC Charging Socket for Poly Case
Compatible with: DP-4C-21700 / DP-5C-21700 / DP-5C / DP-6 / DP-6C / DP-7 / DP-9 / DP-9C
Enerpower Reention Lock with 2 Keys for Poly Case Spare part
€4.99*
Prod. no.:
11001
Enerpower Reention Lock with 2 Keys for Poly Case
Have your keys closed? Is it defective?
Here we have for a lock for a poly case from Reention as a spare part
Compatible with: DP-4C-21700 / DP-5C-21700 / DP-5C / DP-6 / DP-6C / DP-7 / DP-9 / DP-9C
Enerpower Reention On / Off Switch for Poly Case
€1.99*
Prod. no.:
11740
Enerpower Reention On / Off Switch for Poly Case
Compatible with: DP-4C-21700 / DP-5C-21700 / DP-5C / DP-6 / DP-6C / DP-7 / DP-9 / DP-9C