Plastic spacer/holder for 2 battery cells with 32 mm diameters such as 32700 etc.
In each cell mount, there is room for 2 cells (you need at least 2 of them).
The spacers can be connected to each other
Scope of Delivery
1 x cell holder with room for 2 battery cells 32 mm diameters like 32700
Plastic spacer/holder for 3 battery cells with 32 mm diameters such as 32700 etc.
In each cell mount, there is room for 3 cells (you need at least 2 of them).
The spacers can be connected to each other
Scope of Delivery
1 x cell holder with room for 3 battery cells 32 mm diameters like 32700
Plastic spacer/holder for 2 battery cells with 18 mm diameters such as 18650, or 18500 etc.
In each cell mount, there is room for 2 cells (you need at least 2 of them).
Length: About 40 mm
Width: About 20 mm
Depth: About 8 mm
The spacers can be connected to each other
Scope of Delivery
1 x cell holder with room for 2 battery cells 18 mm diameters like 18650
Plastic spacer/holder for 2 battery cells with 21 mm diameters such as 21700 etc.
In each cell mount, there is room for 2 cells (you need at least 2 of them).
Length: About 48 mm
Width: About 24 mm
Depth: About 8 mm
The spacers can be connected to each other
Scope of Delivery
1 x cell holder with room for 2 battery cells 21 mm diameters like 21700
Plastic spacer/holder for 3 battery cells with 21 mm diameters such as 21700 etc.
In each cell mount, there is room for 3 cells (you need at least 2 of them).
Length: About 70 mm
Width: About 24 mm
Depth: About 8 mm
The spacers can be connected to each other
Scope of Delivery
1 x cell holder with room for 3 battery cells 21 mm diameters like 21700
Plastic cavity for 52 battery cells with 18 mm diameters such as 18650, or 18500 etc.
This cavity is used at battery cases from type Hailong for batteries in following configurations:
13S4P / 10S5P
Length: About 305 mm
Width: About 55 mm - 70 mm
Scope of Delivery
2 x cavities for 52 18650 cells (Set)
Plastic cavity for 52 battery cells with 18 mm diameters such as 18650, or 18500 etc.
This cavity is used at battery cases from type Hailong for batteries in following configurations:
13S4P / 10S5P
Length: About 320 up to 350 mm
Width: About 54mm
Scope of Delivery
2 x cavities for 52 18650 cells (Set)
Plastic cavity for 65 battery cells with 18 mm diameters such as 18650, or 18500 etc.
This cavity is used at battery cases from type Hailong for batteries in following configurations:
13S5P / 10S6P
Length: About 305 mm
Width: About 70 mm - 85 mm
Scope of Delivery
2 x cavities for 65 18650 cells (Set)
Plastic cavity for 30 battery cells with 18 mm diameters such as 18650, or 18500 etc.
This cavity is used at battery cases from type Hailong for batteries in following configurations:
13S2P / 10S3P
Length: About 275 mm
Width: About 40 mm
Scope of Delivery
2 x cavity for 30 18650 cells