Softpack Battery 36V 10.35 Ah BMS 20A XLR-3 with 35E

199,99 € *

incl. IVA più costi di spedizione

Tempi di consegna ca. 5-7 giorni

  • 361020101
ENERpower Softpack battery 36V in format 10S3P square | 375 Wh | capacity 10.35 Ah | for... di più
Informazioni prodotto "Softpack Battery 36V 10.35 Ah BMS 20A XLR-3 with 35E"

ENERpower Softpack battery 36V in format 10S3P square | 375 Wh | capacity 10.35 Ah | for Pedelecs, eBikes DIY | with Samsung 35E.

Important General Information

The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.

In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).

In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery

Compatible with 36V motors

250 watts / 500 watts / 750 watts

Highlights

  • High-quality production - Made in Germany
  • Production Just-In-Time
  • BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
  • With battery cells INR18650-35E from Samsung SDI
  • Direct from the manufacturer
  • Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
  • No memory effect - charge the battery whenever you want
  • Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)

Technical Specifications

  • Li-ion Cell: Samsung INR18650-35E
  • Voltage (nominal): 36V (37V)
  • Capacity: 10.35 Ah
  • Power: approx. 375 Wh
  • Configuration: 10S3P (set up: 6x5)
  • Internal resistance: < 75 mOhm
  • Charge voltage: 42V
  • End-of-discharge voltage: 30V
  • Continuous discharge Current: 20A = 720 watts
  • 10 minutes discharge Current: 25A = 900 watts
  • 5 seconds discharge current: 30A = 1040 watts
  • Continuous load per battery cell: approx. 3.7A and approx. 7A in peak load
  • Weight: approx. 1.5 Kg.
  • Charge connector (connects to the charger): XLR-3 (3 pins)
  • Discharge connector (connects to the motor): XT-90

Dimensions

  • Length: 200 mm
  • Width: 60 mm – 75 mm
  • Height: 70 mm
tensione della batteria: 36V
Chimica della batteria: Li-Ion
Capacità della batteria (autonomia): 10Ah - 15Ah
BMS: 20A
Configurazione della batteria: 10S3P
Versione Soft Pack: Quadrato
Ulteriori link a "Softpack Battery 36V 10.35 Ah BMS 20A XLR-3 with 35E"
Leggere, scrivere e discutere i commenti... di più
Valutazione clienti per "Softpack Battery 36V 10.35 Ah BMS 20A XLR-3 with 35E"
Scrivi valutazione
Le valutazioni vengono attivate dopo la verifica.

I campi contrassegnati da * sono obbligatori.

Ho preso atto delledisposizioni sulla privacy.

Consigliato!
Modiary Charger 42V 4A Modiary Charger 42V 4A
da 37,99 € * 40,99 € *
Consigliato!
Consigliato!
ENERpower LiFePO4 12V (12.8V) 25.6Ah 328Wh ENERpower LiFePO4 12V (12.8V) 25.6Ah 328Wh
da 210,00 € * 225,00 € *
ENERpower Frog Battery 36V 12Ah with 30Q ENERpower Frog Battery 36V 12Ah with 30Q
da 290,00 € * 310,00 € *
Visti di recente