Quantité | Prix unitaire |
---|---|
À 1 | 400,00 € * (336,13 € Net, TVA 63,86 € * ) |
À partir de 2 | 390,00 € * (327,73 € Net, TVA 62,27 € * ) |
À partir de 6 | 380,00 € * (319,33 € Net, TVA 60,67 € * ) |
À partir de 11 | 372,00 € * (312,61 € Net, TVA 59,40 € * ) |
À partir de 26 | 364,00 € * (305,88 € Net, TVA 58,12 € * ) |
Prix dont TVA plus frais de port
Délai de livraison 7-14 Jours ouvrés
- Réf. d'article : 11099
ENERpower Softpack battery 48V in format 13S4P | 960 Wh | capacity 20 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-50E
Important General Information
The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.
In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 48V motors
250 Watts / 500 Watts / 540 Watts / 750 Watt / 950 Watt
Highlights
- High-quality production - Made in Germany
- Production Just-In-Time
- BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
- Direct from the manufacturer
- Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
- No memory effect - charge the battery whenever you want
- Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
Technical Specifications
- Li-ion Cell: Samsung SDI INR21700-50E
- Voltage (nominal): 48V (46.8V - 48.1V)
- Capacity: 20 Ah
- Power: approx. 960 Wh
- Configuration: 13S4P (set up: 13×4)
- Internal resistance: < 75 mOhm
- Charge voltage: 54.6V
- End-of-discharge voltage: 39V
- Continuous discharge Current: 20A = 950 watts
- 5 seconds discharge current: 30A = 1440 watts
- Weight: 3 Kg.
- Charge connector (connects to the charger): XLR-3 (3 pins)
- Discharge connector (connects to the motor): XT-90 / XT-60 / Anderson PowerPole
Dimensions
- Length: ca. 305 mm
- Width: ca. 92 mm – 102 mm
- Height: ca. 75 mm
tension de la batterie: | 48V |
Chimie des batteries: | Li-Ion |
Piles: | INR21700-50E |
Capacité de la batterie : | 10Ah - 15Ah |
BMS: | 20A |
Configuration de la batterie: | 13S3P |
Version Soft Pack: | rectangulaire |