Prix dont TVA plus frais de port
Délai de livraison 7-10 Jours ouvrés
- Réf. d'article : 11380
ENERpower Softpack battery 36V in format 10S3P RECTANGULAR | 435Wh | capacity 12 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-40T
Important General Information
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.
A smart BMS is digitally controlled and therefore more accurate. The BMS reads more powerfully and also supports recuperation.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
Compatible with 36V motors
250 watts / 500 watts / 750 watts / 950 Watt / 1080 Watt / 1440 Watts
- High-quality production - Made in Germany
- Production Just-In-Time
- BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
- Direct from the manufacturer
- Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
- No memory effect - charge the battery whenever you want
- Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)
- Li-ion Cell: Samsung SDI INR21700-40T
- Voltage (nominal): 36V (37V)
- Capacity: 12 Ah
- Power: approx. 435 Wh
- Configuration: 10S3P (set up: 10x3 - rectangular)
- Internal resistance: < 75 mOhm
- Charge voltage: 42V
- End-of-discharge voltage: 30V
- Charge Max.: 8A
- Continuous discharge Current: 30A = 1080 Watt or 40A = 1440 watts
- 5 seconds discharge current: 50A = 1800 watts
- Weight: approx. 2.5 Kg.
- Charge connector (connects to the charger): XLR-3 (3 pins)
- Discharge connector (connects to the motor): XT-90
- Length: 230 mm
- Width: 70mm – 90 mm
- Height: 74 mm
|tension de la batterie:||36V|
|Chimie des batteries:||Li-Ion|
|puissance du moteur:||Jusqu'à 1440 watts|
|Capacité de la batterie :||10Ah - 15Ah|
|BMS:||Smart BMS 30A, oder 40A|
|Configuration de la batterie:||10S3P|
|Version Soft Pack:||rectangulaire|