ENERpower Softpack 48V 13S6P 20.70Ah with BMS 20A Pedelec Battery (13×6) DIY 35E

410.80 Inc. 19% Vat.

ENERpower Softpack Battery 48V (13S6P) 20.70Ah for Pedelecs & eBikes powered by Samsung 35E battery-cells.

In stock

Important general information

The 48V (46.8V-48.1V) batteries in softpack in format 13S, which we assembled, have 2 formats – square and rectangular. The batteries are assembled with cells-holders made of plastic.

Charging is enabled with a DC round plug (5.5 mm / 2.5 mm); discharging is enabled with a discharge cable with XT90 connector. A safety fuse of 30A in a water resistant holder limits the current rate.

In the rectangular version, 13 cells are used as the longest side (260 mm). We assemble this type of battery in formats 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6).

The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point the battery is approx. 10 – 15 mm thicker.

The softpack batteries are manufactured with FR4 isolation, inflammable and flame-retardant composites consisting of epoxy resin and fiberglass cloth. FR-4 is used, inter alia, as an electrically non-conductive carrier material for electrical printed circuit boards.


  • High quality assembling – Made in Germany 
  • Assembling Just-In-Time
  • BMS with an integrated passive balancer
  • BMS with protection against overcharge, deep discharge, over discharge (temperature control)
  • Assembly with battery cells from Samsung SDI or LG Chem (depending on availability)
  • Direct from the manufacturer
  • Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
  • No memory-effect – charge the battery whenever you want
  • Weight: approx. 4.1 Kg
  • Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)

Technical Details

  • Li-ion battery cell: Samsung SDI INR18650-35E
  • Voltage (nominal): 48V (46.8V-48.1V)
  • Capacity: 20.70Ah
  • Energy: approx. 1000Wh
  • Configuration: 13S6P
  • Built: 13 x 6
  • Internal resistance: < 75 mOhm
  • Charging voltage: 54.6V
  • End-of-discharge voltage: 39V
  • Continuous discharge current: 20A = 960 Watt
  • 10 seconds 30A: approx. 1440 Watt


  • 260 mm length
  • 120 mm – 135 mm width
  • 70 mm height


There are no reviews yet.

Be the first to review “ENERpower Softpack 48V 13S6P 20.70Ah with BMS 20A Pedelec Battery (13×6) DIY 35E”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.