535.00€ Inc. 19% Vat.
ENERpower softpack battery 36V 27.20Ah for pedelecs, eBikes DIY with 35E (200 x 160-170 x 70 mm) // BMS 40A
Only 5 left in stock
The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is made possible with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, the discharging is done via a discharge cable with XT90 connector (male). A safety fuse of 60A in a waterproof mount limits the power absorption.
In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (build 8 × 4), 10S4P (build 8 × 5), 10S5P (build 8 × 7) and 10S6P (build 8 × 8).
In the rectangular version, 10 cells are used on the longest side (200 mm). We manufacture this type of battery in the formats 10S3P (build 10 × 3), 10S4P (build 10 × 4), 10S5P (build 10 × 5), 10S6P (build 10 × 6) etc.
The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker. Here we use a BMS with a continuous load of 40A.
We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.
In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery
250 Watt / 500 Watt / 750 Watt / 1000 Watt / 1250 Watt
|Dimensions||38.5 × 11.0 × 7.5 cm|