Shop

ENERpower Softpack 36V 10S6P 20.70Ah BMS Pedelec Battery (8×8) DIY 35E QUADRAT // 40A BMS LED 3XLR

430.00 Inc. 19% Vat.

ENERpower Softpack battery 36V 20.70Ah for pedelecs, eBikes DIY with 35E (160 x 175 x 70 mm) // BMS 40A

Only 2 left in stock

Important General Information

The 36V batteries in Softpack, which we manufacture, have 2 versions: square and rectangular. The batteries are manufactured in plastic cell brackets. Charging and discharging are done via an output cable with XT90 connector.

In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).

In the rectangular version, 10 cells are used on the longest side (200 mm). We manufacture this type of battery in the formats 10S3P (construction 10×3), 10S4P (construction 10×4), 10S5P (construction 10×5) and 10S6P (construction 10×6).

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

With the 40A BMS you can power 36V engines with a total output of about 1400 watts. The maximum charge is 8A with this BMS.

Highlights

  • High-quality manufacturing – made in Germany
  • Assembly just-in-time
  • BMS with an integrated passive balancer
  • BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
  • directly from the manufacturer
  • Rechargeable – After 300 charging cycles maintains 80% of the original capacity
  • No memory effect – charge the battery whenever you want
  • Weight: approx. 3.3 kg.
  • Environmentally friendly according to EU Directive 2002/95/EC (RoHS)

Technical data

  • Li-ion Cell: Samsung SDI INR18650-35E
  • Voltage (nominal): 36V (37V)
  • Capacity: 20.70Ah
  • Power: About 745 Wh
  • Configuration: 10S6P
  • Construction: 8×8
  • Internal resistance: < 75 mOhm
  • Charge Voltage: 42V
  • End-of-Discharge Voltage: 30V
  • Continuous discharge current: 40A = 1440 watts
  • 10 Min. Discharge current: 45A = 1620 watts
  • Maximum charge: 8A

Dimensions

  • 160 mm length
  • 160 mm-175 mm width
  • 70 mm Height
Weight 3.2 kg
Dimensions 38.5 × 11.0 × 7.5 cm