Shop

ENERpower Softpack 36V 10S6P 20.7Ah with BMS Pedelec Battery (10X6) DIY 35E

319.30 Inc. 19% Vat.

ENERpower softpack battery 36V 20.70Ah for Pedelecs and eBikes DIY.
Powered by Samsung SDI INR18650-35E

Description

Important general information

The 36V batteries in softpack, which we assembled, have 2 formats – square and rectangular. The batteries are assembled with cells-holders made of plastic.

Charging is enabled with a DC round plug (5.5 mm / 2.5 mm); discharging is enabled with a discharge cable with XT90 connector. A safety fuse of 30A in a water resistant holder limits the current rate.

In the square version, 8 cells are used as the longest side (160 mm). We assemble this type of battery in formats 10S3P (8×4), 10S4P (8×5), 10S5P (8×7) and 10S6P (8×8).

In the rectangular version, 10 cells are used as the longest side (200 mm). We assemble this type of battery in formats 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).

The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point the battery is approx. 10 – 15 mm thicker.

The softpack batteries are manufactured with FR4 isolation, inflammable and flame-retardant composites consisting of epoxy resin and fiberglass cloth. FR-4 is used, inter alia, as an electrically non-conductive carrier material for electrical printed circuit boards.

Highlights

  • High quality assembling – Made in Germany
  • Assembling Just-In-Time
  • BMS with an integrated passive balancer
  • BMS with protection against overcharge, deep discharge, over discharge (temperature control)
  • Powered by Samsung li-ion battery cells INR18650-35E  –> 60A continuous load
  • Direct from the manufacturer
  • Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
  • No memory-effect – charge the battery whenever you want
  • Weight: approx. 3.2 Kg
  • Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)

Technical Details

  • Li-ion battery cell: Samsung INR18650-35E
  • Voltage (nominal): 36V (37V)
  • Capacity: 20.70Ah
  • Energy: approx. 745Wh
  • Configuration: 10S6P
  • Format: 10×6
  • Internal resistance: < 75 mOhm
  • Charging voltage: 42V
  • End-of-discharge voltage: 30V
  • Continuous discharge current: 20A = 720 Watt
  • 10 Min. discharge current: 25A = 900 Watt
  • 5 Sec. discharge current: 35A = 1260 Watt
  • Constant load per cell: approx. 3.7A or 7A in peak load.

Dimensions

  • 200 mm length
  • 120 mm – 135 mm width
  • 70 mm height

 

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ENERpower Softpack 36V 10S6P 20.7Ah with BMS Pedelec Battery (10X6) DIY 35E”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.