ENERpower Softpack 36V 10S5P 13Ah BMS Pedelec Battery (10×5) DIY VTC5 Rectangular

245.00 Inc. 19% Vat.

ENERpower Softpack Battery 36V 13Ah for Pedelecs, E-Bikes DIY with VTC5 (200 x 115 x 70 mm)

Important General Information

The 36V batteries in Softpack, which we manufacture, have 2 versions: square and rectangular. The batteries are manufactured in plastic cell brackets. The battery is charged using a standard DC round plug (5.5 mm / 2.5 mm), discharging is achieved with a discharge cable with an XT90 plug (male). A fuse of 30A in a water-resistant holder limits the current drain.

In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).

In the rectangular version, 10 cells are used on the longest side (200 mm). We manufacture this type of battery in the formats 10S3P (construction 10×3), 10S4P (construction 10×4), 10S5P (construction 10×5) and 10S6P (construction 10×6).

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

With the battery cells from Murata (Sony) of the type US18650VTC5 you get a battery with both a very robust voltage range as well as strong power. The Murata battery cells are high-current battery cells and can support any engine in the best possible way. This battery is recommended for landscapes with strong increases.


  • High-quality manufacturing – made in Germany
  • Assembly just-in-time
  • BMS with an integrated passive balancer
  • BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
  • directly from the manufacturer
  • Rechargeable – After 300 charging cycles maintains 80% of the original capacity
  • No memory effect – charge the battery whenever you want
  • Weight: approx. 2.8 kg.
  • Environmentally friendly according to EU Directive 2002/95/EC (RoHS)

Technical Details

  • Li-Ion Cell: Murata (Sony) US18650VTC5
  • Voltage (nominal): 36V (37V)
  • Capacity: 13Ah
  • ENERGY: approx. 435 wh
  • Configuration: 10S5P
  • Construction: 8×7
  • Internal resistance: < 75 mOhm
  • Charge Voltage: 42V
  • End-of-Discharge Voltage: 30V
  • Continuous Discharge Current: 20A = 720 watts
  • 10 Min. Discharge current: 25A = 900 Watts
  • 5 Seconds Discharge Current: 35A = 1260 Watts
  • Continuous load per cell: approx. 4A or approx. 8A in peak load


  • 200 mm length
  • 100 mm-115 mm width
  • 70 mm Height
Weight 3.2 kg
Dimensions 38.5 × 11.0 × 7.5 cm