Shop

ENERpower Softpack 36V 10S3P 10.35Ah with BMS Pedelec Battery (10×3) DIY 35E RECTANGULAR

199.90 Inc. 19% Vat.

ENERpower Softpack Battery 36V 10.35Ah for Pedelecs, E-Bikes DIY with Samsung INR18650-35E rectangular.

Important General Information

The 36V batteries in the Softpack, which we manufacture, have 2 versions: square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is made possible with a DC round plug (5.5 mm/2.5 mm), discharging is carried out via an discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

Highlights

  • High-quality manufacturing – made in Germany
  • Assembly just-in-time
  • BMS with an integrated passive balancer
  • BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
  • Samsung INR18650-35E Li-Ion cells–>30A Load continuously
  • directly from the manufacturer
  • Rechargeable – After 300 charging cycles maintains 80% of the original capacity
  • No memory effect – charge the battery whenever you want
  • Weight: approx. 1.5 kg.
  • Environmentally friendly according to EU Directive 2002/95/EC (RoHS)

Technical Details

  • Li-ion Cell: Samsung INR18650-35E
  • Voltage (nominal): 36V (37V)
  • Capacity: 10.35 Ah
  • Energy: approx. 375 wh
  • Configuration: 10S3P
  • Construction: 6×5
  • Internal resistance: < 75 mOhm
  • Charge Voltage: 42V
  • End-of-Discharge Voltage: 30V
  • Continuous Discharge Current: 20A = 720 watts
  • 10 Min. Discharge current: 25A = 900 Watts
  • 5 Seconds Discharge Current: 35A = 1260 Watts
  • Continuous load per cell: approx. 3.7A or approx. 7A in peak load

Dimensions

  • 200 mm length
  • 60 mm-75 mm width
  • 70 mm Height
Weight 3.2 kg
Dimensions 38.5 × 11.0 × 7.5 cm

Reviews

There are no reviews yet.

Be the first to review “ENERpower Softpack 36V 10S3P 10.35Ah with BMS Pedelec Battery (10×3) DIY 35E RECTANGULAR”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.