Shop

ENERpower Softpack 24V 7S3P 10.35Ah with BMS Pedelec Battery (7×3) DIY

145.00 Inc. 19% Vat.

Rectangular ENERpower softpack battery 24V (25.2V-25.9V) 10.35Ah for Pedelecs and eBikes DIY.
Powered by Samsung SDI INR18650-35E.

Important general information

The 24V batteries (25.2V – 25.9V) in softpack, which we assembled, have 2 formats – square and rectangular. The batteries are assembled with cells-holders made of plastic.
Charging is enabled with a DC round plug (5.5 mm / 2.5 mm); discharging is enabled with a discharge cable with XT90 connector. A safety fuse of 30A in a water resistant holder limits the current rate.

The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point the battery is approx. 10 – 15 mm thicker.

The softpack batteries are manufactured with FR4 isolation, inflammable and flame-retardant composites consisting of epoxy resin and fiberglass cloth. FR-4 is used, inter alia, as an electrically non-conductive carrier material for electrical printed circuit boards.

Highlights

  • High quality assembling – Made in Germany 
  • Assembling Just-In-Time
  • BMS with an integrated balancer
  • BMS with protection against overcharge, deep discharge, over discharge (temperature control)
  • Samsung SDI INR18650-35E li-ion battery cells –> 30A continuous load
  • Direct from the manufacturer
  • Rechargeable – even after 300 charging cycles 80% of the original capacity is still available.
  • No memory-effect – charge the battery whenever you want
  • Weight: approx. 1.2 Kg
  • Environment friendly according to EU-Guidelines 2002/95/EG (RoHS)

Technical Details

  • Li-ion battery cell: Samsung SDI INR18650-35E
  • Voltage (nominal): 24V (25.2V – 25.9V)
  • Capacity: 10.35Ah
  • Energy: approx. 265Wh
  • Configuration: 7S3P
  • Format: 7×3
  • Internal resistance: < 75 mOhm
  • Charging voltage: 29.4V
  • End-of-discharge voltage: 21V
  • Continuous discharge current: 20A = 480 Watt
  • 10 Min. discharge current: 25A = 600 Watt
  • 5 Sec. discharge current: 35A = ca. 850 Watt

Dimensions

  • 140 mm length
  • 60 mm – 75 mm width
  • 70 mm height

 

Weight 1.2 kg
Dimensions 14 × 6-7.5 × 7 cm

Reviews

There are no reviews yet.

Be the first to review “ENERpower Softpack 24V 7S3P 10.35Ah with BMS Pedelec Battery (7×3) DIY”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.