ENERpower Softpack 48V (51.8V) 14S6P 17,10Ah with BMS Pedelec Battery (10×9) DIY 29E LED 3XLR

425.00 405.00 Inc. 19% Vat.

ENERpower Softpack battery 48V (14S6P) 20.70 Ah for pedelecs, eBikes DIY square. BMS 35A

Out of stock

Important General Information

The 48V (50.2V-51.8.1V) soft pack batteries in 14S format that we manufacture have 2 versions – square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is made possible with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, the discharging is done via a discharge cable with XT90 connector (male). A fuse of 40A in a waterproof mount limits the current drain.

In the square version, 10 cells are used as the longest side (200 mm). We manufacture this type of battery in 14S4P (build 10×6), 14S5P (build 10×7) and 14S6P (build 10×9).

In the rectangular version, 14 cells are used as the longest side (280 mm). We manufacture this type of battery in 14S4P (14×4), 14S5P (14×5) and 14S6P (14×6) formats.

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery


  • High-quality manufacturing – made in Germany
  • Assembly just-in-time
  • BMS with an integrated passive balancer
  • BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
  • Assembled with Samsung SDI, or Sony cells (subject to availability)
  • directly from the manufacturer
  • Rechargeable – After 300 charging cycles maintains 80% of the original capacity
  • No memory effect – charge the battery whenever you want
  • Weight: approx. 4.50 kg.
  • Environmentally friendly according to EU Directive 2002/95/EC (RoHS)

Technical data

  • Li-ion Cell: Samsung SDI INR18650-29 E
  • Voltage (nominal): 48V (50.4V-51.8V)
  • Capacity: 17,10 Ah
  • Energy: approx. 855 Wh
  • Configuration: 14S6P
  • Build: 10 x 9
  • Internal resistance: < 75 mOhm
  • Charge voltage: 58.8V
  • Maximum Charging current: 5A
  • End-of-Discharge Voltage: 42V
  • Continuous load current: 35A = about 1800 watts
  • 10 Min. Discharge current: 45A = about 2250 watts
  • 5 second discharge current: 60A = about 3000 watts

Dimensions build 10×9

  • 200 mm length
  • 180 mm-195 mm width
  • 70 mm Height
Weight 3.2 kg
Dimensions 38.5 × 11.0 × 7.5 cm