Shop

ENERpower Hailong Pro 36V Bike-Frame Li-Ion battery 14.25Ah Conversion DIY 29E + Charger 2A

315.00 Inc. 19% Vat.

ENERpower Hailong Pro 36V (37V) bike-frame Li-Ion battery 14.25Ah conversion DIY 29E + Charger 2A

ENERpower bike-frame battery Li-ion Hailong Pro DIY 36V (37V) from own production 14.25Ah (513Wh) with Samsung SDI INR18650-29E + charger 42V 2A (85W)
  • For motors from 250 Watt and up to 750 Watt

Important General Information

This 36V battery in the Hailong Pro case, that we assemble, can be mounted on the bike’s frame, or on the carrier. The batteries are manufactured in plastic cell holders. The charging is made possible with a DC round plug (5.5 mm/2.5 mm), the discharge is carried out via the holder (separable from the battery) with XT90 connection piece. This case can accomodate up to 52 battery cells of type 18650.

With a BMS (battery management system) that can withstand 20A-22A continuous load, this battery is suitable for motors with up to 750 watts of power, which operate in 36V (37V) systems.

The battery holder is identical to the Hailong Plus holder (case with space for 65 battery cells). So you can use the bracket for the 2 different housings.

Note that in some of the offers in the shop only the battery and no charger are offered. Please take care. You can find the appropriate Chargers (2A, 3A and 4A outputs) either in our eBay shop or find the right offer with your desired charger.

Highlights

  • High-quality manufacturing – made in Germany
  • Assembly just-in-time
  • BMS with an integrated passive balancer
  • BMS with protection against overcharge, deep discharge, over-discharge (temperature monitoring)
  • Samsung SDI INR18650-29E Li-Ion cells–>up to 8A continuous load per parallel circuit
  • directly from the manufacturer
  • Rechargeable – After 300 charging cycles maintains 80% of the original capacity
  • No memory effect – charge the battery whenever you want
  • Environmentally friendly according to EU Directive 2002/95/EC (RoHS)

Technical Details

  • Li-ion Cell: Samsung SDI INR18650-29E
  • Voltage (nominal): 36V (37V)
  • Capacity: 14.25Ah
  • Configuration: 10S5P
  • Internal resistance: < 75 mOhm
  • Charge Voltage: 42V
  • End-of-Discharge Voltage: 30V
  • BMS Continuous Discharge Current: 22A
  • BMS 10 Min. Discharge Current: 25A
  • BMS 5 Seconds Discharge Current: 30A
  • Safety Fuse: 30A
  • Weight: approx. 2.75 kg.
  • Charge: DC round plug 5.5 mm/2.5 mm
  • Discharge: Cable with fuse 30A with XT90 power connector (counterpart is included in the scope of delivery)

Dimensionen (with Holder)
Length: ca. 370 mm
Width: 90 mm
High: 85-90 mm

In this productset you receive a GS approved charger (Modiary/ENERpower) 42V 2A with a round plug (DC). The charging time with this charger is between 8-9 hours (from empty to full)