Revolectrix CellPro Power Lab 8X2 PL8 Duo

439,00 € *
Prezzo netto 368,91 € IVA 70,09 € *

Prezzi incl. IVA più spese di spedizione

Pronto per la spedizione di oggi,
tempo di consegna ca. 1-3 giorni lavorativi

  • 10565
Cellpro Dual PowerLab 8x2 with dual EC5 input cables, 2688W, Multichemistry Battery... altro
Informazione prodotto "Revolectrix CellPro Power Lab 8X2 PL8 Duo"

Cellpro Dual PowerLab 8x2 with dual EC5 input cables, 2688W, Multichemistry Battery Workstation
Independent channel operation, 1344W per channel, 2688W total using 40V input. Intuitive PowerLab interface. Designed with built in PowerLab reliability and quality.

Extended input voltage range (10V-48V).
Weight: 3.8 kg

Revolectrix continues the PowerLab tradition of excellence with the new Dual PowerLab 8x2. With completely independent dual channel operation, this monster boasts 1344W of output power per channel for a total of 2688W all told! This kind of power coupled with the extremely user-friendly and popular PowerLab interface, and features no one else in the industry can touch, like our PC compatible Charge Control Software (CCS) put this unit squarely at the top of the food chain and all for a price that might surprise you.

Major Features

Selectable charge rates range 10mA to 40A per channel

Continuous maximum output power rating, 1344W @ +39.53VDC input voltage, 408W @ +12VDC input voltage

Using +40VDC to +48VDC input, 1344W output will deliver full current rating (40A) over the full range of output voltage up to 33.6V

Smart power management allows customer to select between programmable input power sources. Using the Charge Control Software (CCS), choose from several templates to get you in the ballpark, then fine tune the settings. Available settings include power supply input current limit, input low voltage limit, regenerative discharge rate and voltage limit. Dual PowerLab stores 1 set-up for Power Supply per channel and 1 set-up for Battery per channel and asks for verification one time on start-up

Dual PowerLab does not support charging through node wires only

Initiate charge, discharge, monitor, and multiple cycles at the DPL or via remote control from the CCS. Graph all major operations when using CCS. When using both channels, launch separate instances of the CCS within Windows.

Open Architecture presets allow for customization of any User Preset including show/hide presets on unit, preset name editing, up to 100 parameters control how presets are displayed and charging/discharge/cycling parameter associated with particular batteries and/or charging strategies. Unit includes 25 user preset banks pre-loaded for most major battery type/chemistries, plus 50 library presets.

0.1mohm voltage resolution allows accurate four point internal resistance measurement of each cell

Environmentally friendly, regenerative discharge capability of up to 1344W. Unlike traditional methods of discharge, which deplete the output battery's energy in the form of heat across a transistor, regenerative discharge takes most of that energy and puts it back into the input battery. In other words, when you discharge your LiPo for storage, you will be re-charging your Lead Acid input battery. The total amount of power that you can achieve is limited only by the amount of current that your input battery can accept, or 1344W, whichever is lower.

Dual PowerLab is also equipped with a traditional, 95W internal discharge capability which is non-regenerative

High speed, high quality 50mm cooling fan (one per channel)

Over-sized internal heat sink

Twin (per channel) 12AWG silicon input power cables with EC5 connectors

Sendust core toroid capable of 40A continuous input current requirement for maximum output specifications


Other Features

Supports Cellpro (FMA) and JST-XH wiring modes

Adapters available for all popular R/C battery brands

One 2 line, 16 character backlit LCD per channel

Available opto-isolated PC interface and free Charge Control Software (CCS)

Intuitive 4 button user interface per channel

Sleek and attractive high-impact ABS enclosure designed for maximum airflow efficiency

Sturdy Aluminum top panel with reliable, recessed tactile buttons

Quick "preset over-ride access" to common charging parameters like setting charge and discharge current and operational modes of charge / discharge / monitor / cycle(s)

Additional advanced options menu for adjusting in-depth charging parameters and global options at the unit

GUI PC software (CCS) allows access to 25 User Presets and 50 Library Presets per channel stored in the unit or available in unlimited number on the P.C. When using both channels, launch two independent instances of the CCS

Free and reliable firmware updates for the life of the product using the CCS. Firmware updates accomplished on each channel independently.

Automatic Low voltage restore for recovering damaged or overdischarged packs

Programmable options allow speaker ON/OFF or volume, LCD contrast, customized welcome screen, and much more

Cold weather mode reduces end-charge voltage; parameters adjustable by customer including ON/OFF, end-charge voltage offset reduction, and temperature

Expansion Channel mode whereby one DPL primary (master channel 1) can control the expansion channel 2, send over preset information, control all aspects of charging and balancing. This feature is perfect for charging multiple packs of same chemistry and capacity using multiple devices such as split packs connected in series during operation all at unbelievable rates.

Auto charge mode available utilizing advanced fuel gauging technology

Customizable fuel table lookup values based on presets. Fuel tables can be created using a Fuel Table Wizard in the CCS and applied to individual battery brands by presets for improved accuracy

Industry's first Safe Parallel adapters available to maximize available power potential. P.C. software supports up to 9 packs in parallel per channel depending on adapters used. The DPL supports parallel, charge, discharge, cycle, or monitor on each channel. Adapters are peripheral products, available separately, or included as a part of DPL combos
Per-Channel Specifications:

For Battery types: Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 8s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 8s balanced, 1s to 9s unbalanced), NiCd (1s to 21s), NiMH (1s to 21s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA)

Input Voltage: Each channel may be operated on separate power supplies using 110V/15A isolated circuits for best results. Additionally both channels may be operated on one power supply provided packs on each channel are isolated.

Pack capacity: 20 mAh to 360Ah

Input voltage: 10-48VDC, reverse polarity protected

Input current: 1A to 40A, software limited

Power conversion: Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current

Output battery charge current: Adjustable range 10mA to 40A, limited by 40A input current*

Output battery discharge current: Internal discharge 10mA to 10A, 95W max Regenerative discharge 10mA to 40A, 1344W max**

Continuous max output power: 408W @ +12VDC input, 1344W @ +39.53VDC

Cell balancing: Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging

Voltage calibration: Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV

Current calibration: Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA

Measurement accuracy:
Voltage resolution: 78uV (16 bit)
Voltage tolerance: +/- 6mV
Charge current: +/- 1%
Capacity added to pack: +/- 1%
Percent capacity (“Fuel”): +/- 5% (with accurate fuel table defined for battery being charged)

Serial data output: 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity

Data integrity: Checksum, CRC checking

Cooling fans: 13 CFM, 50mm diameter

Heat sink: Internal 120W aluminum, thin finned

Output battery connector: “Cellpro” compatible, JST PA series, 9 position

LCD: 2 line, 16 character, light grey/blue backlit

Size: 10.24 in. (260mm) L x 5.55 in. (141mm) W x 3.08 in. (77mm) H

8V.

Link correlati a "Revolectrix CellPro Power Lab 8X2 PL8 Duo"
Leggere, scrivere e discutere recensioni... altro
Valutazione cliente per "Revolectrix CellPro Power Lab 8X2 PL8 Duo"
Scrivi una valutazione
Le valutazioni vengono attivate dopo la verifica.

I campi contrassegnati con * sono obbligatori.

4S Charger for Li-Ion-Batteries 14.4V-14.8V 1A Round Plug 4S Charger for Li-Ion-Batteries 14.4V-14.8V 1A...
Da 10,61 € *
Prezzo netto 8,92 € IVA 1,69 € *
4S Charger for Li-Ion-Batteries 14.4V-14.8V 1.5A Round Plug 4S Charger for Li-Ion-Batteries 14.4V-14.8V...
Da 11,31 € *
Prezzo netto 9,50 € IVA 1,81 € *
4S Charger for Li-Ion-Batteries 14.4V-14.8V 2A Round Plug 4S Charger for Li-Ion-Batteries 14.4V-14.8V 2A...
Da 17,22 € *
Prezzo netto 14,47 € IVA 2,75 € *
Bafang EB-BUS cable 1T3 for Display and handbreaks 120 cm Bafang EB-BUS cable 1T3 for Display and...
13,99 € *
Prezzo netto 11,76 € IVA 2,23 € *
Tongsheng engine mounting screw M33 Tongsheng engine mounting screw M33
2,99 € *
Prezzo netto 2,51 € IVA 0,48 € *
Tongsheng replacement torque sensor 36V and 48V TSDZ2 Tongsheng replacement torque sensor 36V and 48V...
85,99 € *
Prezzo netto 72,26 € IVA 13,73 € *
Enerpower Gath luggage rack Case 10S6P with luggage rack Enerpower Gath luggage rack Case 10S6P with...
79,99 € *
Prezzo netto 67,22 € IVA 12,77 € *
Mounting Plate for Frame-Battery 35 x 35 mm Mounting Plate for Frame-Battery 35 x 35 mm
0,80 € *
Prezzo netto 0,67 € IVA 0,13 € *
Reention Polly Holder for Cases with Place for Controller (4 Pins) Reention Polly Holder for Cases with Place for...
Da 10,65 € *
Prezzo netto 8,95 € IVA 1,70 € *
Reention Polly Holder for Cases without Place for Controller (5 Pins) Reention Polly Holder for Cases without Place...
Da 10,65 € *
Prezzo netto 8,95 € IVA 1,70 € *
Set of Cavity for 30 cells 18 mm Diameter Type Rack Set of Cavity for 30 cells 18 mm Diameter Type...
Da 4,45 € *
Prezzo netto 3,74 € IVA 0,71 € *
BMS 13S 20A for Li-Ion Batteries 48V BMS 13S 20A for Li-Ion Batteries 48V
34,99 € *
Prezzo netto 29,40 € IVA 5,59 € *
18650 Pure Nickel stripes 201 3P 48 mm x 0.15 mm 100 cm length 18650 Pure Nickel stripes 201 3P 48 mm x 0.15...
Da 5,25 € *
Prezzo netto 4,41 € IVA 0,84 € *
18650 Pure Nickel stripes 201 2P 28 mm x 0.15 mm 100 cm length 18650 Pure Nickel stripes 201 2P 28 mm x 0.15...
Da 4,46 € *
Prezzo netto 3,75 € IVA 0,71 € *
Enerpower Reention Bike-Frame Battery empty Polly-DP-5C Meggido (13S) 52 Cells Enerpower Reention Bike-Frame Battery empty...
Da 31,49 € *
Prezzo netto 26,46 € IVA 5,03 € *
BUNDLE
Enerpower Reention Bike-Frame Battery empty Polly-DP-5C Megiddo (10S) 52 Cells Enerpower Reention Bike-Frame Battery empty...
Da 31,49 € *
Prezzo netto 26,46 € IVA 5,03 € *
Samsung SDI INR21700-40T 21700 4000 mAh (25A) Samsung SDI INR21700-40T 21700 4000 mAh (25A)
Da 5,65 € *
Prezzo netto 4,75 € IVA 0,90 € *
Rear rack universal 26 - 28 inch type FME0006 for ebikes Rear rack universal 26 - 28 inch type FME0006...
42,99 € *
Prezzo netto 36,13 € IVA 6,86 € *
BUNDLE
Enerpower Reention 21700 Bike-Frame Battery empty Polly-DP-4C Jericho (10S) 40 Cells Enerpower Reention 21700 Bike-Frame Battery...
Da 29,39 € *
Prezzo netto 24,70 € IVA 4,69 € *
Pure Nickel stripes 201 7 mm x 0.125 mm 100 cm length Pure Nickel stripes 201 7 mm x 0.125 mm 100 cm...
Da 2,48 € *
Prezzo netto 2,08 € IVA 0,40 € *
Pure Nickel stripes 201 5 mm x 0.125 mm 100 cm length Pure Nickel stripes 201 5 mm x 0.125 mm 100 cm...
Da 2,40 € *
Prezzo netto 2,02 € IVA 0,38 € *
Charge Indicator for 13S Li-ion Batteries Charge Indicator for 13S Li-ion Batteries
Da 4,29 € *
Prezzo netto 3,61 € IVA 0,68 € *
Charge Indicator for 10S Li-ion Batteries Charge Indicator for 10S Li-ion Batteries
Da 4,29 € *
Prezzo netto 3,61 € IVA 0,68 € *
Enerpower SW102 Display UART Tongsheng compatible 6-Pins Enerpower SW102 Display UART Tongsheng...
47,00 € *
Prezzo netto 39,50 € IVA 7,50 € *
BUNDLE
Softpack Battery 36V 35 Ah BMS 30A XLR-3 with 50E Softpack Battery 36V 35 Ah BMS 30A XLR-3 with 50E
530,00 € *
Prezzo netto 445,38 € IVA 84,62 € *
Softpack Battery 36V 30 Ah BMS 30A XLR-3 with 50E Softpack Battery 36V 30 Ah BMS 30A XLR-3 with 50E
460,00 € *
Prezzo netto 386,55 € IVA 73,45 € *
Consigliato!
ENERpower LiFePo4 24V (25.6V) 10Ah replaces 2 x lead-acid 12V Batteries ENERpower LiFePo4 24V (25.6V) 10Ah replaces 2 x...
Da 165,00 € *
Prezzo netto 138,66 € IVA 26,34 € *
Enerpower DZ41 Display UART Tongsheng compatible 6-Pins (150 cm Cable) Enerpower DZ41 Display UART Tongsheng...
39,00 € *
Prezzo netto 32,77 € IVA 6,23 € *
Enerpower Reention 21700 Bike-Frame Battery empty Polly-DP-7 Hebron (10S) 70 Cells Enerpower Reention 21700 Bike-Frame Battery...
Da 35,24 € *
Prezzo netto 29,61 € IVA 5,63 € *
ENERpower 29,4V Charger for 24V Batteries 2A DC (CB, UL) ENERpower 29,4V Charger for 24V Batteries 2A DC...
Da 15,30 € *
Prezzo netto 12,86 € IVA 2,44 € *
Atnen Charger 42V 6A XLR-3 for 36V Batteries Li-Ion (CB, GS,) Atnen Charger 42V 6A XLR-3 for 36V Batteries...
Da 57,12 € *
Prezzo netto 48,00 € IVA 9,12 € *
BUNDLE
Battery case 24V 40Ah (1 Kwh) BMS 60A with NCR2070C Battery case 24V 40Ah (1 Kwh) BMS 60A with...
Da 730,00 € *
Prezzo netto 613,45 € IVA 116,55 € *
Softpack Battery 21.6V-22.2V 3.4Ah PCM 5A no Connector 6 x 1 Softpack Battery 21.6V-22.2V 3.4Ah PCM 5A no...
Da 62,00 € *
Prezzo netto 52,10 € IVA 9,90 € *
BUNDLE
ENERpower SoundBoks 3S4P 11.1V battery (12V) 20Ah 220Wh Fuel Gauge ENERpower SoundBoks 3S4P 11.1V battery (12V)...
142,00 € *
Prezzo netto 119,33 € IVA 22,67 € *
MPPT Controller 17V-55V to 10V-32V 400 Watt programmable MPPT Controller 17V-55V to 10V-32V 400 Watt...
70,00 € *
Prezzo netto 58,82 € IVA 11,18 € *
MPPT Controller 17V-55V to 24V-85V 400 Watt programmable MPPT Controller 17V-55V to 24V-85V 400 Watt...
70,00 € *
Prezzo netto 58,82 € IVA 11,18 € *
30A 29,4V Charger for 24V Li-Ion Batteries 900 Watt Charging Status 30A 29,4V Charger for 24V Li-Ion Batteries 900...
290,00 € *
Prezzo netto 243,70 € IVA 46,30 € *
Consigliato!
BUNDLE
HaiLong Bike-Frame Battery Side-Realese Li-Ion 36V 9Ah Pedelec eBike HaiLong Bike-Frame Battery Side-Realese Li-Ion...
Da 255,00 € *
Prezzo netto 214,29 € IVA 40,71 € *
BUNDLE
Softpack Battery 6S 21.6V-22.2V 15Ah BMS 20A 6x3 Softpack Battery 6S 21.6V-22.2V 15Ah BMS 20A 6x3
Da 249,00 € *
Prezzo netto 209,24 € IVA 39,76 € *
BUNDLE
20 x Sanyo Panasonic NCR2070C 3500 mAh 30A 20700 20 x Sanyo Panasonic NCR2070C 3500 mAh 30A 20700
Da 74,70 € *
Prezzo netto 62,77 € IVA 11,93 € *
Consigliato!
LG Chem INR21700 M50T 21700 5000 mAh (10A) LG Chem INR21700 M50T 21700 5000 mAh (10A)
Da 4,75 € *
Prezzo netto 3,99 € IVA 0,76 € *
Softpack Battery 24V 18Ah (440Wh) BMS 50A XLR-3 with 30T (up to 1200 Watt) Softpack Battery 24V 18Ah (440Wh) BMS 50A XLR-3...
Da 275,00 € *
Prezzo netto 231,09 € IVA 43,91 € *
BUNDLE
Softpack Battery 24V 15Ah (360Wh) BMS 50A XLR-3 with 30T (up to 1200 Watt) Softpack Battery 24V 15Ah (360Wh) BMS 50A XLR-3...
Da 235,00 € *
Prezzo netto 197,48 € IVA 37,52 € *
Consigliato!
Enerpower Frame Bag for eBike Batteries Enerpower Frame Bag for eBike Batteries
25,99 € * 29,74 € *
Prezzo netto 21,84 € IVA 4,15 € *
Charger 67.2V for Li-Ion batteries 60V 3A 210W Charger 67.2V for Li-Ion batteries 60V 3A 210W
Da 64,00 € *
Prezzo netto 53,78 € IVA 10,22 € *
Softpack Battery Li-Ion 24V 10.35Ah 35E in Enerpower Frame Bag Softpack Battery Li-Ion 24V 10.35Ah 35E in...
Da 174,99 € *
Prezzo netto 147,05 € IVA 27,94 € *
ENERpower 26650 LiFePO4 3.2V 4000mAh (UL, IEC) ENERpower 26650 LiFePO4 3.2V 4000mAh (UL, IEC)
Da 4,48 € *
Prezzo netto 3,76 € IVA 0,72 € *
XTAR PB2 Blue Charger / Powerbank for 2 x 18650 cells XTAR PB2 Blue Charger / Powerbank for 2 x 18650...
9,90 € * 14,90 € *
Prezzo netto 8,32 € IVA 1,58 € *
BUNDLE
Softpack Battery 24V 50Ah BMS 40A XLR-3 with 50E Softpack Battery 24V 50Ah BMS 40A XLR-3 with 50E
Da 705,00 € *
Prezzo netto 592,44 € IVA 112,56 € *
BMS 10S 20A for Li-Ion Batteries 36V (37V) BMS 10S 20A for Li-Ion Batteries 36V (37V)
33,99 € *
Prezzo netto 28,56 € IVA 5,43 € *
Consigliato!
BUNDLE
ENERpower LiFePO4 12V (12.8V) 36Ah 460Wh ENERpower LiFePO4 12V (12.8V) 36Ah 460Wh
234,99 € * 266,72 € *
Prezzo netto 197,47 € IVA 37,52 € *
BUNDLE
Softpack Battery 24V 10Ah BMS 20A XLR-3 with 50M Softpack Battery 24V 10Ah BMS 20A XLR-3 with 50M
155,00 € *
Prezzo netto 130,25 € IVA 24,75 € *
ENERpower 29,4V Charger for 24V Batteries 4A ENERpower 29,4V Charger for 24V Batteries 4A
Da 34,39 € *
Prezzo netto 28,90 € IVA 5,49 € *
ENERpower 29,4V Charger for 24V Batteries 2.5A DC (CB, UL) ENERpower 29,4V Charger for 24V Batteries 2.5A...
Da 20,69 € *
Prezzo netto 17,39 € IVA 3,30 € *
Consigliato!
Roswheel Attack Bag for eBike Batteries Roswheel Attack Bag for eBike Batteries
22,99 € * 26,50 € *
Prezzo netto 19,32 € IVA 3,67 € *
Charge Indicator for 7S Li-ion Batteries Charge Indicator for 7S Li-ion Batteries
Da 4,29 € *
Prezzo netto 3,61 € IVA 0,68 € *
Charge Indicator for 10S Li-ion Batteries Charge Indicator for 10S Li-ion Batteries
Da 4,29 € *
Prezzo netto 3,61 € IVA 0,68 € *
BUNDLE
Softpack Battery 36V 10Ah - 25Ah in Enerpower frame Bag Softpack Battery 36V 10Ah - 25Ah in Enerpower...
Da 215,00 € *
Prezzo netto 180,67 € IVA 34,33 € *
BUNDLE
Softpack Battery 36V 9.60 - 19.20Ah MH1 in Enerpower Frame Bag Softpack Battery 36V 9.60 - 19.20Ah MH1 in...
Da 226,00 € *
Prezzo netto 189,92 € IVA 36,08 € *
Atnen Charger 42V 4A (170 Watt) Atnen Charger 42V 4A (170 Watt)
Da 35,99 € *
Prezzo netto 30,24 € IVA 5,75 € *
Atnen Charger 42V 2A DCJ 5.5 mm for 36V Batteries Li-Ion (DB, GS, UL) Atnen Charger 42V 2A DCJ 5.5 mm for 36V...
Da 22,99 € *
Prezzo netto 19,32 € IVA 3,67 € *
ENERpower ECD-500 Energy Storage Unit 20Ah 500Wh ENERpower ECD-500 Energy Storage Unit 20Ah 500Wh
Da 320,99 € *
Prezzo netto 269,74 € IVA 51,25 € *
Visto