Softpack Battery 48V 12Ah BMS 20A / BMS 30A XLR-3 with 40T

ENERpower Softpack battery 48V in format 13S3P | 576 Wh | capacity 12 Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR21700-40T.

Important General Information

The 48V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male). A fuse of 30A in a water-resistant holder limits the current drain.

In the square version, 10 cells are used on the longest side (220 mm). We manufacture this type of battery in the formats 13S3P (construction 10×4), 13S4P (construction 10×6), 13S5P (construction 10×7) and 13S6P (construction 10×8) etc.

In the rectangular version, 13 cells are used on the longest side (286 mm). We assemble this type of battery in the formats 13S2P (construction 13×2), 13S3P (13×3), 13S4P (13×4), 13S5P (13×5) and 13S6P (13×6) etc.

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 10 -15 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery