Softpack Battery 36V 10.50Ah BMS 30A XLR-3 with NCR2070C SQUARE (7x6)

ENERpower Softpack battery 36V in format 10S4P square | capacity 10.50Ah | for Pedelecs, eBikes DIY | with Panasnoc NCR2070C

Important General Information

The 36V batteries in softpack, which we manufacture in Berlin, have 2 versions square and rectangular. The batteries are manufactured in plastic cell brackets. Charging is done with a high-quality spiral cable (20 cm – 100 cm) with an XLR-3 PINS, discharging via a discharge cable with XT90 connector (male).

In the square version, 8 cells are used on the longest side (160 mm). We manufacture this type of battery in the formats 10S3P (construction 8×4), 10S4P (construction 8×5), 10S5P (construction 8×7) and 10S6P (construction 8×8).

In the rectangular version, 10 cells are used on the longest side (200 mm). We assemble this type of battery in the formats 10S2P (construction 10×2), 10S3P (10×3), 10S4P (10×4), 10S5P (10×5) and 10S6P (10×6).

The Battery Management System (BMS) is always mounted on the longest side of the battery. At this side the battery is approx. 20 -25 mm thicker.

We manufacture the Softpack batteries with FR4 insulation, flame retardant composites made of epoxy resin and glass fabrics. FR-4 is used, among other things, as an electrically non-conductive carrier material for electrical circuit boards.

In this battery we have an LED charge status display (empty/25%/50%/75%/full). This is located on the upper side of the battery

In this battery we use an High-Current battery cell from Panasonic NCR2070C. This battery cell has very low internal ressistance and is very robust also at cold tempertures