Softpack Battery 24V 48.3Ah BMS 40A XLR-3 with 35E

675,00 € *

Prezzi incl. IVA più spese di spedizione

Tempi di produzione per le batterie: ca. 20-30 giorni lavorativi | Altri prodotti: 5-7 giorni lavorativi

Connettore (scarica):

Scegli un connettore

Con caricabatterie da 29,4 V (per batterie da 24 V):

Scegli un caricabatterie

  • 2471435
Nessun bundle disponibile per la variante selezionata. Si prega di selezionare un\'altra variante per delle offerte bundle.
Risparmia con la nostra offerta bundle:
Softpack-Akku 24V 48,3Ah BMS 40A XLR-3 mit 35E (1160Wh)
ENERpower Ladegerät 29,4V für Akkus 24V 6A XLR-3
ENERpower Ladegerät 29,4V für Akkus 24V 4A 120 Watt
765,25 € * Invece di 772,98 € *
Prezzo per tutti
Tempo di consegna 20-30 Giorni lavorativi
Apri bundle / Configura bundle
Beim Speichern der Bundle-Konfiguration ist ein Fehler aufgetreten.
Softpack Battery 24V 48.3Ah BMS 40A XLR-3 with 35E
- ENERpower -   675,00 € *
ENERpower Softpack battery 24V in format 7S14P | 1170Wh | capacity 48.3Ah | for Pedelecs,... altro
Informazione prodotto "Softpack Battery 24V 48.3Ah BMS 40A XLR-3 with 35E"

ENERpower Softpack battery 24V in format 7S14P | 1170Wh | capacity 48.3Ah | for Pedelecs, eBikes DIY | with Samsung 35E.

Important General Information

This 24V battery in softpack is in 7S format (25.2V-25.9V) and is manufactured with the battery cells of Samsung SDI, Murata (Sony) or Panasonic. The batteries are manufactured in cell holders made of plastic and equipped with a BMS 40A brand ENERpower. Charging is made with a spiral cable (20 - 100 cm extendable) with a XLR-3 (3 pins) connector. Discharging is realized via a discharge cable with XT90 connector (male). A counterpart XT90 is also included.
A fuse (fuse) of 60A in a waterproof holder limits the current drain and provides an additional safety measure.

Thus, this battery is also suitable for motors with 1000 watts of power.

We manufacture the softpack batteries with FR4 insulation, flame retardant and flame retardant composites consisting of epoxy resin and glass fiber fabric. FR-4 is used inter alia as an electrically non-conductive substrate in electrical circuit boards.

Compatible with 24V motors

250 watts / 350 watts / 500 watts / 750 watts / 1000 watts


  • High-quality production - Made in Germany
  • Production Just-In-Time
  • BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
  • Samsung SDI INR18650-35E Li-Ion Cells –> 10A continuous load
  • Direct from the manufacturer
  • Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
  • No memory effect - charge the battery whenever you want
  • Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)

Technical Specifications

  • Li-ion battery cell: Samsung SDI INR18650-35E
  • Voltage (nominal): 24V (25.2V – 25.9V)
  • Capacity: 48.3 Ah
  • Energy: approx. 1170 Wh
  • Configuration: 7S14P
  • Format: 14 ×7
  • Internal resistance: < 75 mOhm
  • Charging voltage: 29.4V
  • End-of-discharge voltage: 21V
  • Continuous discharge current: 20A = 480 Watt
  • 10 Min. discharge current: 40A = 1000 Watt
  • 5 Sec. discharge current: 45A = ca. 1125Watt
  • Weight: approx. 5.40 kg.


  • Length: 280 mm Länge
  • Width: 140 mm – 155 mm
  • Height: 70 mm
tensione della batteria: 24V
Chimica della batteria: Li-Ion
Celle : INR18650-35E
la potenza del motore: Fino a 1000 Watt
Capacità della batteria (autonomia): 40Ah - 60Ah
BMS: 40A
Configurazione della batteria: 7S14P
Versione Soft Pack: Rettangolare
Link correlati a "Softpack Battery 24V 48.3Ah BMS 40A XLR-3 with 35E"
Leggere, scrivere e discutere recensioni... altro
Valutazione cliente per "Softpack Battery 24V 48.3Ah BMS 40A XLR-3 with 35E"
Scrivi una valutazione
Le valutazioni vengono attivate dopo la verifica.

I campi contrassegnati con * sono obbligatori.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.