Softpack Battery 24V 10.35Ah BMS 20A XLR-3 with 35E

Softpack Battery 24V 10.35Ah BMS 20A XLR-3 with 35E

Quantità	Prezzo al pezzo
fino al 4	158,00 € *
da 5	150,10 € *
da 10	145,36 € *
da 26	142,20 € *

incl. IVA più costi di spedizione

Tempi di produzione 7-14 Giorni lavorativi

Codice articolo: 247310

ENERpower soft-pack battery 24V in format 7S3P | Capacity 10.35Ah | for Pedelecs, eBikes DIY |... di più

Chiudi menù

Informazioni prodotto "Softpack Battery 24V 10.35Ah BMS 20A XLR-3 with 35E"

ENERpower soft-pack battery 24V in format 7S3P | Capacity 10.35Ah | for Pedelecs, eBikes DIY | with Samsung SDI INR18650-35E.

Important General Information

The 24V batteries (25.2V - 25.9V) in softpack are manufactured in Berlin, and assembled in cell holders made of plastic. Charging is daone with a 3-pin charging plug (XLR-3), discharging via a discharge cable with XT-90 connector (male). A fuse of 30A in a waterproof holder limits the current drain.

The BMS (Battery Management System) is always mounted on the longest side of the battery. At this point, the battery is about 10 to 15 mm thicker.

The softpack batteries are assembled with FR4 insulation, which is made of flame retardant composite materials and consists of epoxy resin and glass fiber fabric. FR-4 is used i.a. as an electrically non-conductive substrate in electrical circuit boards.
Highlights

Highlights

High-quality production - Made in Germany
Production Just-In-Time
BMS with an integrated passive balancer and protection against overcharge, over-discharge, over-discharge (temperature monitoring)
Samsung SDI INR18650-35E high quality Li-ion cells -> 30A load continuously
Direct from the manufacturer
Rechargeable - After 300 charging cycles, still maintains 80% of the original capacity
No memory effect - charge the battery whenever you want
Environmentally friendly in accordance with EU Directive 2002/95 / EC (RoHS)

Technical Specifications

Li-ion cell: Samsung SDI INR18650-35E
Voltage (nominal): 24V (25.2V - 25.9V)
Capacity: 10.35 Ah
Power: approx. 265 Wh
Configuration: 7S3P
Construction: 7 x 3
Internal resistance: < 75 mOhm
Charging voltage: 29.4V
End-o-fdischarge voltage: 21V
Continuous discharge current: 20A = 480 watts
10 min. discharge current: 25A = 600 watts
5 seconds discharge current: 35A = approx. 850 watts
Weight: Approx. 1.2 kg.

Dimensions

Length: 140 mm Länge
Width: 60 mm – 75 mm
Height: 70 mm

tensione della batteria:	24V
Chimica della batteria:	Li-Ion
Celle :	INR18650-35E
la potenza del motore:	bis 500 Watt
Capacità della batteria (autonomia):	10Ah - 15Ah
BMS:	20A
Configurazione della batteria:	7S3P
Versione Soft Pack:	Rettangolare